Digitus DN-70181 Quick Installation Manual

designed specifically for small business, office, and home office networking requirements. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. It also works well with other 11b/g and 11n protocol ...

You will need WiFi AP/Router Internet access Wireless AP Mode You will need a broadband Router for Internet access Connect the WiFi-Repeater to your Router/Switch withRJ-45 Cable ...

You can configure the Wi-Fi Repeater after connecting it with your computer/laptop with enclosed RJ45 cable or wirelessly. A. Configure the Wi-Fi Repeater wirelessly A1. Plug the Wi-Fi Repeater to a wall socket. A2. Click on the network icon ( or ) on the right bottom of your desktop. You will find the signal from the Di ...

Enter the “User Name” and “Password” then click “OK” to login. The default User name is “admin” and Password is “admin”. A5. After logging in and click “Setup Wizard”, you will see the web page below: Select “Wireless Repeater Mode (Station)” then click on ‘Next’ to continue. ...

A7. When you see the site below, please do not change any setting but only insert the key of your network. Click on ‘Save and Reboot’ button, The Repeater will restart. Wait for a few seconds your Wi-Fi Repeater is ready for use. * The Wireless SSID and KEY of Wi-Fi Repeater is the same as your AP/router. ...

1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the Wi-Fi Repeater with enclosed RJ45 Cable. 2. Follow process A3 to A7 to configure your Wi-Fi Repeater. C. Configure the Wi-Fi Repeater with WPS Button 1. Plug the Wi-Fi Repeater into a wall socket. 2. Make sure WiFi-Repeater t ...

1. Plug the Wi-Fi Repeater into a wall socket. 2. Follow process A3 to A4. 3. Select “Standard Wireless AP Mode” then click on ‘Next’ to continue. 4. The following message will be displayed on your web browser: SSID: Main Service Set Identifier. It’s the "name" of your wireless network. Channel Number: Auto (reco ...

Adding a Wireless computer to the Wi-Fi Repeater 1. Log on to the computer. 2. Open Connect to a Network by right-clicking the network icon (or) in the notification area. 3. Choose the wireless network from the list that appears, and then click Connect. 4. Type the network security key or passphrase ...

(Please check your Wireless adapter Manual with WPS configuration) 4. You should see icons for the computer you added and for the other computers and devices that are part of the network. Adding a wired (Ethernet) computer to the WiFi-Repeater 1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / ...