Dimplex XLF50 Owner's Manual

before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage. To view the full line of Dimplex products, plea ...

Always use a qualified technician or service agency to repair this fireplace. ! NOTE: Procedures and tech- niques that are considered important enough to emphasize. CAUTION: Procedures and tech- niques which, if not carefully followed, will result in damage to the equip- ment. WARNING: Procedures and techniques whic ...

Thank you and congratulations for purchasing an electric fireplace from Dimplex. Please use our convenient online registration page to record your model and serial numbers for future reference at www.dimplex.com/register NO NEED TO RETURN TO THE STORE Questions with operation or assembly? Require Parts Information? Product Under ...

basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: ① Read all instructions before installing or using this electric fireplace. ② This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfac ...

⑭ Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. ⑮ Do not burn wood or other materials in the electric fireplace. ⑯ Do not strike the fireplace glass. ⑰ Always use a certified elec- trician should new circuits be req ...

Figure 1 1. The electrical information re- garding your electric fireplace can be found on the rating label located on the top of the unit. Please use our convenient online registration page to record your model and serial numbers for future reference at www.dimplex.com/register 2. If you have any technical question ...

does not allow fireplace to be in direct contact with building vapor barrier or insulation and meets all local building code. ! NOTE: A dedicated, properly fused 15 Amp circuit is re- quired, rated for the appropri- ate voltage (120V, 240V). WARNING: Construction and wiring must comply with local building codes and other ap- ...

routing. ! NOTE: It is recommended that the bottom of the unit be mounted between 30 in. (76.2 cm) and 40 in. (102 cm) from the ground to maintain an optimized viewing angle of the flame. WARNING: Do not attempt to wire your own new circuits. To reduce the risk of fire, electric shoc ...

ate wire to meet local and national electrical codes for rated power consumption. • Cut the wire to an appropriate length. • Connect the L wire from the unit to the live wire from the power supply with a wire nut. • Connect the N wire from the unit to the neutral wire from the power su ...

power supply. CAUTION: Use the appropri- ate wire to meet local and national electrical codes for rated power consumption. • Cut the wire to an appropriate length. • Connect the L wire from the unit to the live wire from the main power through the wall switch, ensuring all live ...