ProForm 831.299230 Operation & User’s Manual
Text of ProForm 831.299230 Operation & User’s Manual
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
Model No. 831.299230
Serial No.
The serial number is found in the location
shown below. Write the serial number in
the space above for future reference.
SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BE-
FORE YOU BEGIN on page 4 if the treadmill
is not working properly.)
14. Never start the treadmill while you are
standing on the walking belt. Always hold
the handrails or the upper body arms while
using the treadmill.
15. The treadmill is capable of high speeds.
Adjust the
ProForm 831.299230 Thank you for selecting the new PROFORM¨ CROSS-
WALK XT treadmill. The CROSSWALK XT treadmill
combines advanced technology with innovative design
to let you enjoy an excellent form of cardiovascular ex-
ercise in the convenience and privacy of your home.
And when youÕre not exercising, the unique CROSS-
WALK XT can be folded up, requiring less than half the
floor space of other treadmills.
For your benefit, read this manual carefully before
using the t
Extension Leg Screw (53)Ð2
Handrail Washer (92)Ð2
Handrail Nut (91)Ð2
Handrail Bolt (90)Ð2
Latch Screw (35)Ð2
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver and two adjustable wrenches
(not included).
Note: The unders
3. Identify the Right Handrail (7) (it may be helpful to look at
the drawing on page 4).
Hold the Right Handrail (7) at an angle as shown and in-
sert the upper end into the Right Upright (11). Keep the
lower end of the Handrail away from the treadmill to
avoid scratching the finish. Next, rotate the lower end
of the Handrail to the position shown by the dotted line.
Make sure that the hole in the lower end of the Right
Handrail (7) is aligned with the h
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be serio
The console requires two "AA" batteries (not in-
cluded). Alkaline batteries are recommended. To in-
stall batteries, first touch the Handrail (1) to dis-
charge any static. Next, open the battery cover as
shown in the drawing at the upper right. Insert the re-
quired number of batteries into the battery compart-
ment, making sure that the negative (Ð) ends of the
batteries are touching the springs in the battery com-
partment. Close
Insert the key fully into the power switch.
Inserting the key will
not turn on the dis-
plays. The displays will
turn on when the
ON/RESET button is
pressed or when the
walking belt is started.
Note: If you just
installed batteries, the displays will already be on.
Reset the speed control.
Slide the speed control
down to the RESET
position. Note: Each
time the walking belt
is stopped, the speed
control must be
moved to the RESET
position before the
walki
ProForm 831.299230 HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rath
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the stor-
age latch is closed fully over the catch.
1. Hold the upper ends of the handrails. Place one foot on
the base as shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca-
tion. Never move the treadmill without tipping it back.
To reduce the
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged
4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the de-
sired results is to exercise with the proper intensity.
The proper intensity level can be found by
Training Zone Exercise
After warming up, increase the intensity of your exer-
cise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exer-
cise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exerciseÑnever hold your breath.
A Cool-down
Finish each workout with 5 to 10 minutes of stretching
to cool down. This will increase the flexibili
PART LISTÑModel No. 831.299230
R0899A
Key No. Qty.
Description
1
1
Left Handrail
2
1
Key/Clip
3
6
Console Screw/Frame Guide Screw
4
1
Battery Cover
5
2
Foot Rail
6
1
Lift Motor
7
1
Right Handrail
8
1
Speed Potentiometer
9
1
Speed Control Knob
10*
1
Console Assembly
11
1
Upright Base
12
1
Motor Belt
13
11
Small Screw
14
1
Storage Latch
15
2
4Ó Cable Tie
16
7
8Ó Cable Tie
17
1
Motor Swivel Nut
18
1
Pulley/Flywheel/Fan
19
1
Motor
20*
1
Motor/Pulley/Flywhee
ProForm 831.299230
73
65
48
25
24
56
25
70
77
52
82
79
77
52
79
70
38
49
73
72
49
73
49
73
13
76
78
13
93
94
99
101
95
97
98
96
100
102
59
101
99
100
95
96
98
97
93
94
59
33
41
39
85
69
66
66
3
81
2
1
34
14
35
12
17
20*
21
22
27
19
18
31 30
29
40
25
73
43
36
38
44
37
45
50
47
48
48
39
51
11
23
22
22
58
73
53
40
25
36
37
38
40
89
89
89
60
89
89
89
26
73
61
63
64
73
47
53
34
68
67
48
5
62
5
88
84
83
39
83
39
86
42
25
40
57
28
62
16
38
38
15
39
39
87
7
91
3
3
91
90
92
92
90
55
ProForm 831.299230 Part No. 156137 J01768-C R0899A
Printed in Canada © 1999 Sears, Roebuck and Co.
The model number and serial number of your PROFORM¨
CROSSWALK XT treadmill are listed on a decal attached to the
frame. See the front cover of this manual to find the location of the
decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the t