DFI 848P-AL Operation & User’s Manual

right. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or ...

• Replace only with the same or equivalent type recommend by the manufacturer. • Dispose of used batteries according to the battery manufac- turer’s instructions. FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital ...

board. If, in some cases, some information doesn’t match those shown in the multilingual manual, the multilingual manual should always be regarded as the most updated version. The multilingual manual is included in the system board package. To view the user’s manual, insert the CD ...

Chapter 1 - Introduction 1.1 Features and Specifications................................................................................. 1.2 Hyper-Threading Technology Functionality Requirements... 1.3 Package Checklist......................................................................................................... Chapter 2 - Hard ...

4.1 Desktop Management Interface................................................................. 4.2 Drivers, Utilities and Software Applications................................ 4.3 3D Audio Configuration..................................................................................... 4.4 Installation Not ...

1.1.1 Features Chipset • Intel® 848P chipset - Intel® 848P Memory Controller Hub (MCH) - Intel® 82801EB I/O Controller Hub (ICH5) Processor The system board is equipped with Socket 478 for installing one of the following supported processors. • Intel® Pentium® 4 (Prescott and Northwood) processor up t ...

• 5 PCI slots AGP (Accelerated Graphics Port) • Supports AGP 3.0 (AGP 4x and 8x) and AGP 2.0 (AGP 1x and 4x) spec. • Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/ sec.) add-in cards. AGP is an interface designed to support high performance 3D graphics cards for 3D graphics applications. It handle ...

audio signals to a device without having to be converted first to an analog format. This prevents the quality of the audio signal from degrading whenever it is converted to analog. S/PDIF is usu- ally found on digital audio equipment such as a DAT machine or audio ...

• Two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) Serial ATA is a storage interface that is compliant with SATA 1.0 specification. With speed of up to 1.5Gbps, it improves hard drive performance even in data intensive environments such as audio/ video, consumer electr ...