Eldes EKB3 Operation & User’s Manual
Text of the manual
User Manual v1.1
Compatible with:
•
ESIM264 v7.06.00 and up.
•
ESIM364.
Main features:
•
Alarm system arming & disarming;
•
Stay mode activation & deactivation;
•
System parameter configuration;
•
PGM output control;
•
Visual indication by LED indicators;
•
Audio indication by built-in mini buzzer;
•
Keyboard partition switch.
EKB3 is a L
USER MANUAL EKB3 V1.1
3
2. Technical specifications
2.1 Electrical and mechanical characteristics
Power supply
12-14V
150mA max
Maximum Keyboard Connection Cable Length
100 m.
Dimensions
140x100x18mm
Range of Operating Temperatures
-30...+55ºC
2.2 LED Functionality
ARMED
Security system is armed /Configuration mode
READY
System is ready – no violated
2.5 Keyboard Address
DIP switches located on the back side of the keyboard are intended to set keyboard address. The keyboard address is configured by
setting the DIP switch positions. ELDES alarm system allows to connect up to 4 EKB3 keyboards - each set under different address. DIP
switch combinations for different keyboard address configuration are indi
USER MANUAL EKB3 V1.1
5
3. Installation
1. Detach keyboard holder from EKB3 front side . Keyboard holder detach points are marked with arrows (see Fig. No. 3).
2.
Disconnect alarm system ELDES alarm system power supply and backup battery before connecting the wires.
3.
Fix the keyboard holder on the wall using the screws.
4.
Wire up keyboard terminals to
4. EKB3 Zone & Tamper
Keyboard EKB3 has one wired zone Z1 and one tamper button. By default, the keyboard zone Z1 is disabled. The keyboard zone can
be enabled by SMS, keyboard and ELDES Configuration Tool. When Z1 is enabled, it operates like any other system zone, therefore a
sensor can be connected to it. In addition, Z1 and COM terminals must be connec
USER MANUAL EKB3 V1.1
7
5. Additional Information
Limited Liability
The buyer must agree that the system will reduce the risk of fire, theft, burglary or other dangers but does not guarantee against such
events. “ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system. “ELDES
UAB” liability
Vartotojo vadovas v1.1
Suderinama su:
•
ESIM264 v7.06.00 ir vėlesne.
•
ESIM364.
Pagrindinės savybės:
•
Apsaugos įjungimas ir išjungimas;
•
Stay režimo įjungimas ir išjungimas
•
Sistemos parametrų konfigūravimas;
•
PGM išėjimų valdymas;
•
Informacijos atvaizdavimas LED indikatoriais;
•
Informavimas apie sistemos būseną garsini
VARTOTOJO VADOVAS EKB3 V1.1
9
2. Techninė specifikacija
2.1 Elektrinės ir mechaninės charakteristikos
Maitinimo šaltinis
12-14V
150mA max
Maksimalus klaviatūros prijungimo laido ilgis
100 m.
Matmenys Matmenys
140x100x18mm
Darbinis temperatūrų diapazonas
-30...+55ºC
2.2 LED indikatorių paskirtis
ARMED
Įjungtos apsaugos būsena /konfigūravimo re�
2.5 Klaviatūros adresas
Jungikliai (DIP) skirti nustatyti klaviatūros adresui. Prie vienos ESIM264 centralės galima prijungti iki 4 EKB3 klaviatūrų. Kiekviena ši
klaviatūra turi būti sukonfigūruota skirtingu adresu (negali būti vienodi DIP jungiklių adresai). Galimos sistemos konfigūracijos kom-
binacijos pateiktos lentelėje.
Kiekvienos prij