Eldes EKB3 Operation & User’s Manual
Text of the manual
User Manual v1.2
Compatible with:
•
ESIM264 v07.14.02 and up.
•
ESIM364 v02.06.01 and up.
Main features:
•
Alarm system arming & disarming;
•
Stay mode activation & deactivation;
•
System parameter configuration;
•
PGM output control;
•
Visual indication by LED indicators;
•
Audio indication by built-in buzzer;
•
Keypad partition switch.
USER MANUAL EKB3 V1.2
3
2. Technical specifications
2.1 Electrical and mechanical characteristics
Power supply
12-14V
150mA max
Maximum Keypad Connection Cable Length
100 m.
Dimensions
140x100x18mm
Range of Operating Temperatures
-30...+55ºC
2.2 LED Functionality
ARMED
Alarm system is armed /Configuration mode
READY
System is prepared for arming
SYSTEM
2.5 Keypad Address
Jumpers 2 and 3 located on the back side of the keypad are intended to set keypad address. The keypad address is configured by
setting the jumper positions. ELDES alarm system allows to connect up to 4 EKB3 keypads - each set under different address. Jumper
combinations for different keypad address configuration are indicated in the tabl
USER MANUAL EKB3 V1.2
5
3. Installation
1. Detach keypad holder from EKB3 front side . Keypad holder detach points are marked with arrows (see Fig. No. 3).
2.
Disconnect alarm system ELDES alarm system power supply and backup battery before connecting the wires.
3.
Fix the keypad holder on the wall using the screws.
4.
Wire up keypad terminals to ELDES al
4. EKB3 Zone and Tamper
Keypad EKB3 has one wired zone Z1 and one tamper button. By default, the keypad zone Z1 is disabled. The keypad zone can be
enabled by SMS, keypad and ELDES Configuration Tool. When Z1 is enabled, it operates like any other system zone, therefore a sensor
can be connected to it. In addition, Z1 and COM terminals must be connected wi
USER MANUAL EKB3 V1.2
7
6. Additional Information
Limited Liability
The buyer must agree that the system will reduce the risk of fire, theft, burglary or other dangers but does not guarantee against such
events. “ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system. “ELDES
UAB” liability
Made in Lithuania. Pagamintas Lietuvoje. Сделано в Литве.
www.eldes.lt / www.eldesgsm.ru