Eldes EPIR2 Safety Instructions

SAFETY INSTRUCTIONS Valid for EPIR2 v1.01.06 and up (later referred to as ‘the EPIR2’, ‘the system’, ‘the device’ ‘the unit’ or ‘the detector’) Please read and follow these safety guidelines to safeguard yourself and others: • DO NOT use the system where it can interfere with other devices - such as medical devices • The alarm system radio transceiver operates in the GSM850, GSM900, GSM1800 and GSM1900 ...

Copyright © “ELDES UAB”, 2013. All rights reserved. It is forbidden to copy and distribute information in this document without advance written authorisation from ELDES UAB. We reserve the right to update or modify this document and/or related products without warning. The EPIR2 GSM Alarm Sys- tem complies with the essential requirements and relevant provisions of Directive 1999/5/EC. The declaration of conformity may be vie ...

Contents of pack: Item Quantity EPIR2 alarm system ........................ 1 Power supply ....................................1 User manual ......................................1 MiniUSB cable ...................................1 Back-up battery ................................1 Screws ................................................1 5,6kΩ resistor....................................1 Not included: You will need to supply ...

Protecting your home and property with the EPIR2 alarm system Where and how to use the alarm system The EPIR2 is a convenient, easy to use, remote control security system for houses, cottages, coun- try homes, garages and other buildings. It uses an internal SIM card (not supplied by ELDES) and an infra red sensor, and communicates with your mobile phone so you can: • Protect your property while you are away from home • Liste ...

Components of the EPIR2 security system BACK SIDE INSIDE VIEW 1 8 4 2 7 8 9 12 BELL- / COM BELL+ Z2 13 3 5 16 6 3 15 10 11 14 SIM GSM BATTERY 1 1. EPIR2 holder for fixing on the wall 2. Lens for movement detector and LED 3. Power supply socket to connect to mains electricity 4. Power supply transformer 5. Power supply connection lead 6. Reset button to restore default parameters 7. Holder to fix the unit in place 8. Mini-US ...

1. QUICK START GUIDE OVERVIEW This section tells you how to install the EPIR2 system quickly and easily and covers all the pro- cedures required for full system operation. The alarm system functions via the GSM network, so you will first need to purchase a SIM card so you can ‘talk’ to and program your device via your mobile phone. How to expand your system with additional wireless devices Your EPIR2 system has a built-in wir ...

1.2. Prepare the SIM card 3 6 Place the SIM card in your mobile phone and disable the PIN code by following the appropriate menus on your mobile phone. This will help ensure that when you install the SIM card in the EPIR2 it will operate correctly. IMPORTANT RECOMMENDATIONS • We advise you to choose the same GSM SIM provider for your system as for your mobile phone. This will ensure the fastest, most reliable SMS/text mes ...

LOCK 10 11 Slide the SIM card cover back to lock SIM card in place. Fit the front cover and replace screw. For more information see the diagram of the EPIR2 and the description of components on page <6>. 10 10 12 13 14 1.4. Plug the power supply connector into the device 1.5. Place the device into the holder 1.6. Insert the plug into the mains socket 1.7. How to check the detector is working 15 The system will start in 1 - 2 ...

1.8. About the back-up battery and how to replace it The back-up battery should last for at least two years. Its lifespan will largely depend on the sur- rounding temperature and the frequency of disruptions to the mains power. During mains failure the battery should power the system for up to twenty-four hours. How to replace the battery: 16 17 18 1. Unplug the power supply from the mains electricity socket. 2. Remove t ...

1.9. How to program EPIR2 system Before you continue, you need to program your EPIR system. We recommend that you program the EPIR system using your PC and ELDES Configuration Tool software as it’s the quickest, easiest way and offers more options for your system, such as flexible SMS/text message management. NOTE If you wish to program the EPIR2 system by SMS/text message, please refer to section 3. HOW TO PROGRAM THE S ...

26 Specify a location for setup file and left-click on the Save button. We recommend placing the file on your desktop. 1.9.2. install ELDES Configuration Tool software. 27 Double left-click on the downloaded setup file to run it. ...

In the newly popped-up window left-click on the Next button to continue. 28 In the next window left-click on the Next button to continue. 29 ...

In the following window left-click on the Next button to continue. 30 In the next window left-click on the Next button to continue. 31 ...

In the following window left-click on the Install button to begin the installation process. 32 Wait for the installation progress to complete and do not click on any button. 33 ...

After the successful installation, the following window will pop-up. Left-click on the Finish button in order to end the installation and launch ELDES Configuration Tool software after- wards. 34 NOTE: You do not have to repeat the installation process the next time when you want to run ELDES Configuration Tool software again. 1.9.3. Connect EPIR2 to your PC via the USB cable IMPORTANT: Before connecting EPIR2 to your ...

1.9.4. Run ELDES Configuration Tool software. Run the software anytime you want by double left-clicking on the ELDES ConfigTool shortcut located on the desktop. 37 38 Once the software is up and running, left-click on the USB connection / -connect- button. 39 Type in 4-digit administrator password, which is 1470 (by default) and click on the Continue button. ...

40 On successful first-time connection, a Quick Start Wizard window will show up. Left-click on the Start Wizard button and follow the step-by-step instructions to program the EPIR2 system. After completing all of the Quick Start Wizard steps, your system is ready for use. 1.10. How to arm and disarm the system To arm your system dial the SIM card and wait until it rings three times and then drops the call. This means the s ...

Close all doors Close all doors Don’t stand in movement sensor detection zone Close all windows 41 1.11. A 15 second delay allows you to leave the premises When you arm the system via your phone, a keyfob or a keypad, the system will give you a 15 second delay before it activates, giving you time to leaving the premises. You can change the time delay at any time (see ELDES Configuration Tool software’s Help section). The ...

1.14. Receiving an SMS/text message when temperature exceeds the set values The system comes equipped with a feature intended for temperature measurement in the surrounding area. This feature allows to monitor the temperature and receive a notification by SMS text message, identified as the Temperature Info SMS, to user phone number when the set temperature MIN or MAX boundaries are exceeded. For this purpose you may use t ...