Dedicated Micros SD Excel Installation Manual

modify the specification of the machine described herein without prejudice. Features............................................................................................ 4 Important Safeguards........................................................................ 6 Installing the Unit............................................................................... 8 Installation....................................................................................... 10 Closed IPTV.................................................................................... 19 Configuring the Unit......................................................................... 21 Remote Control............................................................................... 23 Main Menu....................................................................................... 25 Navigating The Configuration Menus.............................................. 27 System Settings.............................................................................. 30 Closed IPTV ................................................................................... 56 Display Settings............................................................................... 65 Camera Settings.............................................................................. 76 Record Settings............................................................................... 88 Schedule......................................................................................... 99 Alarm Settings.....................................................................................102 Network Settings........................................................................... 121 Features & Text............................................................................. 137 Analytics & Third Party IP Cameras.............................................. 138 Installing An Advanced Feature License........................................... 139 Archive.......................................................................................... 158 Oracle Dome Configuration........................................................... 160 Unit Operation............................................................................... 174 Operating the Viewer..................................................................... 175 Using the Optional Keyboards....................................................... 199 Appendix A - Closed IP Configuration Scenarios..................................................... 203 Appendix B - Pinouts..................................................................... 208 Appendix C- Remote Control Codes............................................. 209 Appendix D - User Activity Logging................................................211 Appendix E - Locate IP Address (Serial) ....................................... 212 Appendix F - Videolan VLC........................................................... 213 Appendix G - Third Part IP Camera.............................................. 214 Appendix H - Monitor Output......................................................... 215 Appendix I - Unit Specification...................................................... 216 Appendix J - Status Pages............................................................ 218 Contents

SD Excel ? The flagship product in the SD Series, the SD Excel offers real-time, 4CIF/D1 recording per camera in a premium enterprise hybrid DVR/NVR package that combines all the benefits of a DVR with the feature set of a high performance embedded NVR and offers multiple channels of IP and Analogue video, HDMI main monitor support, on-board analytics, help videos and Oracle Dome configuration. Powerful Hybrid DVR/NVR The SD Excel is a true hybrid DVR/NVR. Offering up to 32 camera connections in a combination of analogue or IP (including 3rd party IP cameras). Up to 16 analogue cameras can be connected, with the balance of the 32 camera connections being made up by IP camera streams - even HD cameras. REAL-TIME, 4CIF/D1 RECORDING PER CAMERA Offering a blend of analogue and IP connections. Each camera can offer 4CIF/D1, real-time viewing, recording and playback simultaneously. PERFORMANCE BOOST WITH TURBO MODE The latest generation SD Excel includes powerful new codecs and the Turbo Mode feature that ensures maximum per camera performance. Enabling Turbo Mode can effectively double the units performance allowing real-time recording at double the resolution simply with the press of a button. CLOSED IPTV The SD Excel is supplied ready to be part of the next generation of video security – Closed IPTV. Dedicated Micros’ ground breaking Closed IPTV solution makes deploying an IP Video, CCTV system safe, secure and simple. Combining patent-pending innovation with zeroconf networking technology, Closed IPTV automatically allocates IP addresses to IP cameras by physical port. In this way the system is completely deterministic, creating firewalls and monitoring IP connections by individual network ports so they cannot be hacked or intercepted. This ground breaking solution provides a very simple and secure answer to IP Video, meaning that no prior knowledge of IP networking is required. Sophisticated and Dependable network security can be achieved with a single click. Leverage the powerful embedded NVR within the SD Excel to incrementally grow your camera estate. Combine your existing installed analogue cameras with secure IP and HD cameras from a Closed IPTV system. Up to 32 camera streams can be connected enabling analogue and secure IP cameras to be shown together seamlessly. All that is required to take the next leap in video surveillance technology is Dedicated Micros unique Layer 3 Enhanced CCTV Switch and NetVu Connected IP cameras. For further information, please visit the website: www.dedicatedmicros.com or contact customer services in your region. from Software version 6.6 (8.0052) M3UP

• Telemetry support (Coax & Serial) • All DVR functions fully supported by Keyboard/IR Remote Control/Front Panel • Scalable recording settings • MultiMode Recording - Dynamically-switchable resolution, record-rate & compression (MPEG4/JPEG) per camera • JPEG or MPEG-4 recording and transmission • Up to 4TB of on-board storage • HDMI monitor support • I.P Camera support • Web pages provide easy remote configuration • Single, Picture in Picture and Multiway displays • Live and playback viewing locally and over Ethernet • Built in activity detection • On-board Help videos • Built in CD-R/DVD-R writer and USB ports for download of video archive to external flash memory • Point&go telemetry control and Absolute Positioning • Alarm Inputs & Outputs • Easy to use on-screen, colour coded soft keys • Front panel interface • Text support and text search features ideal for retail installations • Optional external keyboard available • Configuration via USB mouse and USB QWERTY keyboard • BS8418 compliant The unit has NetVu Connected technology built-in to ensure maximum compatibility with future developments in networked security. NetVu Connected technology enables the Unit to fully interact with other NetVu Connected compatible products from Dedicated Micros including the DV-IP Decoder, NetVu ObserVer and PDA Viewers. Providing interoperability between the worlds leading security companies, NetVu Connected uses industry standard networking protocols supported by a wide range of third party integration products and SDKs to ensure future on-going compatibility. Closed IPTV Dedicated Micros’ ground breaking Closed IPTV solution makes deploying an IP Video, CCTV system safe, secure and simple. Combining patent-pending innovation with zeroconf networking technology, Closed IPTV automatically allocates IP addresses to IP cameras by physical port. In this way the system is completely deterministic, creating firewalls and monitoring IP connections by individual network ports so they cannot be hacked or intercepted. This ground breaking solution provides a very simple and secure answer to IP Video, meaning that no prior knowledge of IP networking is required. Sophisticated and Dependable network security can be achieved with a single click.

A Common Configuration interface is displayed when the unit’s configuration screens are accessed locally at the unit or remotely via a web browser. This unified system ensures that the installer is familiar with the configuration screens irrespective of their location to the unit, minimising training and familiarisation time and increasing the speed of installation and alteration. The Unit includes a unique colour-coded menu structure and on screen Graphical User Interface (GUI). Context sensitive, the menu structure always represents the area of the menu the user is in, allowing them to quickly select the options and settings they need without having to trawl through menu pages and options. The colour coded buttons displayed on the monitor match those on the IR Remote Control, whilst control can also be conducted through an attached USB Mouse or supported Keyboard (DM/KBC1 / DM/ KBC2). Point&go provides the user with easy to use, fast, accurate telemetry control via an attached monitor. With no need for a telemetry keyboard, users are able to use Pan & Tilt control of a Dedicated Micros Oracle Dome simply by clicking an area of the monitor. The camera will instantly respond, positioning the selected area in the middle of the screen, ideal for tracking movement through a scene. MAP Users can now navigate around their CCTV installation using a graphical map. Selecting the relevant camera from the map will instantly connect the user to that cameras image stream. With the ability to load bespoke map images and floor plans to reflect their installations, the Maps feature is ideal for quickly identifying camera locations around a site or CCTV network. Turbo Mode Turbo mode allows video images from any analogue camera or 3rd Party IP recoded camera to be recorded and streamed at the maximum possible rate without the need to configure individual settings. Turbo mode must be set Globally and will result in MPEG record rates of 25pps@4CIF/2CIF/CIF/QCIF. Design of the manual The manual has three parts: 1. Installation Shows details of how to install the unit and connect external devices. 2. Configuration Shows details of the unit’s menus. 3. Operation Shows quick reference details on how to control the unit. The order and layout of these pages has been designed to help the setup process. It is recommended that the menus are edited sequentially (as they appear on the page), to enable accurate, easy and efficient setup.

Power Sources This unit should be operated only from the type of power source indicated on the manufacturer’s label. Servicing Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Ventilation Ensure unit is properly ventilated to protect from overheating. All the safety and operating instructions should be read before the unit is operated. To prevent fire or shock hazard, do not expose this equipment to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of this equipment that there are dangerous voltages within the enclosure which may be of sufficient magnitude to constitute a risk of electric shock. This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Lightning Strike The unit has some inbuilt protection for lightning strike, however it is recommended that isolation transformers be fitted to the system in areas where lightning is a common occurrence. Regulatory Notes and FCC and DOC Information (USA and Canadian Models Only) Warning: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the US Government Printing Office, Washington, DC20402, Stock No. 004-000-00345-4. This reminder is provided to call the CCTV system installer’s attention to Art. 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Directive 89/336/EEC. A ‘Declaration of Conformity’ is held at Dedicated Micros Ltd., 1200 Daresbury Park, Daresbury, Cheshire, WA4 4HS, UK. Laser The unit supports an integrated CD-R/DVD-R writer, the following are additional warnings associated with installing and operating the CD-R/DVD-R writer, please pay particular attention to this information. • Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • To prevent exposure to laser emanations (harmful to the eyes), do not attempt to disassemble this unit.

Before you start Check the contents of the box The following items are included in the box: Remove all items from the packaging and check the items listed below are present. • SD Excel NVR (16 input) • IR Remote Control • Power Leads • IR Extender Lead • SD Excel Software/Documentation CD • Mouse • Rack Mounting brackets • RS485 Telemetry Adaptor • Quick Start Guide If any of these items are missing please contact Dedicated Micros Technical Support team. Note: Before installing the SD Excel DVR, carefully read all Safety Instructions and the following information on where the unit should be located. Choosing a location for installation • The SD Excel is designed to be desk, shelf or rack mounted. Rack mounting brackets are available as an optional accessory. • Ensure the SD Excel unit is properly ventilated to protect from overheating. • Ensure there is a 3cm gap on both sides of the unit. • Ensure the IR receiver on the front of the unit faces the operator position, and is not more than 10 feet (3 metres) from the operator. An IR Remote Control Extender is also available. • Ensure the unit is not located anywhere it could be subject to mechanical shocks. • The unit should be located in an area with low humidity and a minimum of dust. Avoid places like damp basements or loft spaces. • If the unit is to be installed in a closed assembly, the maximum operating temperature must not exceed 40°C (104°F). • Ensure there is reliable earthing of the mains outlet when fitted to supply connections (other than direct connection to the branch circuit). • Any branch circuit supplying the unit must be rated at 15Amps. • It is recommended that an uninteruptable power source be connected to the unit in case of power failure (to ensure continuous operation of the unit).

• Mains point • Network point • Network cable • Active video signals i.e. at least one working camera feed • PC with CD ROM drive and connection to the same network as the NVR (Recommended). Quick Overview of SD Excel Record Settings The SD Excel provides as default: Consistent recording duration and smooth motion video per camera regardless of the number of cameras. Default record settings at MPEG4 6.25pps (at 2CIF), JPEG 3pps (at 2CIF) and MultiMode recording at MPEG4 6.25pps (at 2CIF), JPEG 6.25pps (at 2CIF). Complete Flexibility The advanced record menu can be used to configure individual cameras to suit specific requirements e.g. Entry/Exit routes. Various storage sizes are available dependent on the combination of the number of cameras, the storage options and record rates selected. MultiMode Recording The unit supports MultiMode recording, which is a storage technology developed by Dedicated Micros. This offers the ability to set different recording rates, resolutions and compression formats across scheduled, normal and alarm modes for each individual camera. By varying the quality, bit rate and file size of the recorded images, the MultiMode function can increase recording capabilities of the unit. MultiMode offers: Ability to set different recording resolutions. Ability to set and switch MPEG or JPEG compression recording as required. Ability to set PPS recording rate per camera. Dynamically switchable resolution when switching from Normal to Event recording. Dynamically switchable compression between MPEG4 and JPEG from Normal to Event recording.

Data DVD-R Internal CD/DVD-R drive (located under hinged flap) USB USB2.0 connector (located under hinged flap) LED Green - Unit working normally No LED - Power Failure Live - Unit is in Live mode when lit. Play -Unit is in Playback mode when lit. Spot - Spot (MON B) monitor is being controlled Record - Unit is recording video to the internal hard disk. Rear Panel connections Video VID1 to VID16 75Ω BNC composite video input, 1V pk-pk with loop through 1V MON A 75Ω BNC composite monitor output, 1V pk-pk MON B Spot Monitor output MON A S Video Connection HDMI High-Definition Multimedia Interface connector Note: The position of the HDMI connector will vary dependent on model Audio Audio IN (Dual) RCA (phono) socket, 8KHz/16KHz/22KHz sampling 75Ω input impedance, 1V pk-pk Audio OUT (Dual) RCA (phono) socket, line level <100Ω output impedance,1V pk-pk amplification required

SERIAL 2 RS-232 (3 wire & 9 wire) SERIAL 3 (PTZ) RS-485 (2 wire & 4 wire) SERIAL 4 (PTZ) RS-485 (2 wire & 4 wire) USB 2x USB2.0 connectors IR Infra-Red Input connector for IR Remote Control Extender NET RJ45 Ethernet network connector, 10/100 Mb/s Ethernet Network KBD RJ12 connector for use with Dedicated Micros telemetry keyboards (KBC1, KBC2) EXP RJ12 expansion port for future use SATA E-Sata port available for storage expansion Alarms and relays ALARMS IN Via 25-way (female) D Type 24V 200mA 20 general alarm inputs Range of Alarm states are: i. 0 – 800R = Short circuit ii. 800R – 2K = closed contact iii. 2k – 12k = open contact iv. > 12K = open circuit RELAYS Via 9-way (female) D Type rated at 24V 200mA 4 onboard light duty relay output (500mA@ 12V-48V Max) Power POWER IEC mains power socket & switch

There are a number of Closed IPTV installation scenarios in Appendix A. Step 1 - Connecting to the Network USB NET 1 VID 1 VID 2 VID 3 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 11 IR MON A AUDIO B B B B B B B B B B B ALA EXP KBD AUDIO IN OUT OUT A B SERIAL 2 SERIAL 3 PTZ SERIAL 1 SERIAL 4 PTZ SATA The unit supports a 10/100 Mbps auto-detecting network port. If using, Closed IPTV, use a CAT5 cable to connect port ETH-A of the Layer 3 Enhanced CCTV Switch to the network port labelled ‘NET’. The Layer 3 Enhanced CCTV Switch will provide connection to the general corporate network if required. If not utilising Closed IPTV, connect to a normal switch. Layer 3 Enhanced CCTV Switch connection (Closed IPTV only) By default the unit is configured for DHCP i.e. the unit can automatically be allocated an IP address from a network DHCP server. DHCP works by assigning an IP address at initial connection to the network. It is possible however that this IP address can change without notification i.e. following power failure. DNS (Dynamic Name Service) allows the unit to be assigned a meaningful name which can be used to reference the unit instead of an IP address. This will remain constant in the event that the DHCP assigned IP address changes. If you do not wish to assign a DNS name, a fixed IP address can be assigned via the Configuration Menu pages:Network Settings->Network->IP Address. When the unit is powered up, the network address can be found by viewing on a local monitor and navigating to Configuration Menu pages:System Settings->System->IP Address. Refer to ‘Configuring The Unit’ for further guidance on locating the unit’s IP address and for details of the default DNS (Domain Name Service) address. Important : The Closed IPTV SD Excel unit must be in Configure mode to find any existing units on the network with addresses in the range it can automatically assign. It can then give suitable IP addresses for new cameras, avoiding potential IP address clashes.

USB NET 1 VID 1 VID 2 VID 3 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 IR MON A AUDIO B B B B B B B B B B B B ALARMS EXP KBD AUDIO IN OUT OUT A B SERIAL 2 SERIAL 3 PTZ SERIAL 1 SERIAL 4 PTZ SATA The SD Excel supports up to 16 connected analog Video Inputs via the 75Ω BNC connectors. Connect cameras to the video inputs, starting from input 1. Note: In a Closed IPTV application, channels can be utilised by the Analogue cameras connected to BNC sockets on the back of the unit OR by IP cameras connected to the Closed IPTV camera ports on the Layer3 Enhanced CCTV Switch. If an IP source is plugged into a channel occupied by a BNC connection, the BNC will take priority and possess the channel, whilst the IP connection will be added to an un-allocated list (refer to ‘Closed IPTV Camera Allocation’), allowing it to be tied to an available channel through the configuration pages. The SD Excel has 16 channels that can be used for analogue input. Analogue channels can also be used as recode channels for 3rd party IP inputs or they can also be used to remote codec NetVu Connected capable encoders. The available inputs are; Analogue Recode/IP NetVu Connected 3rdParty SD Excel 16ch 16 or 16 or 32 NetVu connections SD Excel 16ch 16 or 16 and 16 NetVu connections Note: The ‘Restrict public access (Eth B)’ setting (Closed IPTV-> Settings must be enabled if using Oracle IP domes in a Closed IPTV environment. Dedicated Micros strongly recommends enabling this setting once configuration is complete even if Oracle IP Domes are not used in the configuration. Step 3 - Monitor VID 1 VID 2 VID 3 VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 POWER IR MON A B B B B B B B B B B B B B B ALARMS IR EXP KBD RELAYS HDMI B VID 16 B AUDIO IN OUT UT A B 3 PTZ SERIAL 4 PTZ The unit supports a main monitor via ‘HDMI 1’ and BNC ‘A’. A spot monitor can be connected via BNC ‘B’. The unit will boot up in SAFE mode. This allows viewing on both composite and HDMI (if HDMI is connected during BOOT UP). Important: Safe mode is suboptimal, and an appropriate display setting should be configured in the Viewer Defaults Configuration pages.

USB NET 1 VID 1 VID 2 VID 3 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID IR MON A AUDIO B B B B B B B B B B EXP KBD AUDIO IN OUT OUT A B SERIAL 2 SERIAL 3 PTZ SERIAL 1 SERIAL 4 PTZ SATA The SD Excel supports two channels of bi-directional audio, accessible through NetVu ObserVer. Connect the audio equipment to the phono sockets AUDIO IN and AUDIO OUT. The audio channel defaults to recording camera 1. The following modes of operation are supported: • Challenge – intruders from an RVRC. • Listen – to local audio from a site at the RVRC. • Record - local audio from a site with the video. • Replay - all audio through a local Audio output (not supported when Audio out is used as a challenge/PA source). Note: The Audio output can be configured as a challenge output or as a replay output. Step 5 - Relays VID 3 VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 POWER B B B B B B B B B B B B ALARMS IR EXP RELAYS HDMI B VID 16 B RELAYS 111 Pin 1 Relay 1 Signal Pin 2 Relay 2 Signal Pin 3 Relay 3 Signal Pin 4 Relay 4 Signal Pin 5 Pin 9 Relay 4 Signal Pin 8 Relay 3 Signal Pin 7 Relay 2 Signal Pin 6 Relay 1 Signal View on rear of unit Note: HDMI shown removed. The SD Excel supports up to four 24V 200mA relays.

Relay 1 signal 2 & 7 Relay 2 signal 3 & 8 Relay 3 signal 4 & 9 Relay 4 signal Step 6 - Alarms D 1 VID 2 VID 3 VID 13 VID 6 VID 4 VID 5 VID 7 VID 9 VID 15 POWER B B B B B B ALARMS IR EXP KBD HDMI VID 16 B View on rear of unit VID 13 VID 9 V B View on rear of unit VID 13 V n Pin 2 DTX Pin 4 DTX Pin 6 DTX Pin 8 DTX Pin 10 DTX Pin 12 DTX Pin 1 DTX Pin 3 DTX Pin 5 DTX Pin 7 DTX Pin 9 DTX Pin 11 DTX Pin 13 DTX Pin 25 Earth Pin 23 Earth Pin 21 Earth Pin 19 DTX Pin 17 DTX Pin 15 DTX Pin 24 Earth Pin 22 Earth Pin 20 DTX Pin 18 DTX Pin 16 DTX Pin 14 DTX IR ALARMS The SD Excel supports 20 normally open/closed tamper proof alarm inputs, or one Global keyswitch input with camera specific inputs configurable as entry/exit alarms. The alarms support tamper proof detection using 1k in line and 5K end of line resistance. The unit detects short circuit, open circuit and contact closure. This functionality is part of the advanced alarms supported on NetVu Connected products and includes features required for Central Monitoring. It is compatible with the British Standard BS8418. Relay Connector Pin Alarm Input Connection 1 - 20 1-20 21-25 Earth Common

The following describes the EOL tamper alarms circuitry needed when EOL has been configured. There should be two resistive values within the tamper alarm circuitry. These must be located inside the alarm device (furthest point from the unit). The alarm state could be Normally Open or Normally closed however the tamper states are the same for both settings. Open, the resistive value is 6.8K ohms (1K + 5.6K). Closed, the resistive value is 1K ohms, as the circuit does not see the 5.6K ohm resistor. Open Circuit Tamper, the resistive value is infinity as the circuit has been cut and therefore is ‘open’. Short Circuit Tamper, the resistive value is 0 Ohms. Step 7 - Connecting Serial Ports Serial ports have three main uses: 1. Connecting twisted pair telemetry for PTZ cameras. 2. Providing text data recorded with the video e.g. Point of Sale. 3. Debug operations. Note: Telemetry cameras should be connected to Serial 3 and 4. Text data can be retrieved from any serial port.

The SD Excel supports Dedicated Micro keyboards DM/KBC1 and DM/KBC2. Connect either of these keyboards via the KBD connector on the rear panel. Note: Refer to the Unit Operation section of this manual for further guidance regarding the supported keyboards. Step 9 - Connecting DM Oracle, 2060 & 2040 Domes IMPORTANT: The ‘Restrict public access (Eth B)’ setting (Closed IPTV-> Settings must be enabled if using Oracle IP domes in a Closed IPTV environment. A DM Oracle, 2040 or 2060 Dome can be connected via either co-axial telemetry or RS485 twisted pair. If using co-axial the address switches should be set as: Blue switch - F Yellow switch - D If the dome is being connected using RS485, the dome address should be set according to the camera number of the SD Excel. Pin connections for RS485 connection to a Dennard dome on serial port 3/4 are: Dome Cable SD Excel Serial Connector Yellow 1 TX+ Green 9 TX-

VID 1 VID 2 VID 3 VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 POWER A B B B B B B B B B B B B B B ALARMS IR EXP KBD RELAYS HDMI B VID 16 B A B The SD Excel has an internal power supply unit. Connect the mains lead to the unit and then to the wall socket, or to a fused spur connection. To be compliant with wiring regulations in some countries, an Alarm/ Security device should be connected to a fused spur and not a wall outlet socket (check local regulations before installation).

Analogue channels can be utilised by the BNC connections on the back of the unit OR by the sockets on the Layer 3 Enhanced CCTV Switch. If an IP source is plugged into a channel occupied by a BNC connection, the BNC will take priority and possess the channel, whilst the IP connection will be added to an unassigned list, allowing it to be tied to an available channel through the configuration pages. Individual cameras should be connected in sequential order, i.e. connect the first camera to port number 1 on the Layer 3 Enhanced CCTV Switch. When this connection is registered by the NVR, it will display a notification on the Main Monitor showing the recognised details of the new video source, including resolution, name and MAC address. There will also be a notification if a camera is disconnected. Multi channel encoder camera allocation (DV-IP NV1) A NetVu Connected multi-channel server can be can be added to any of the camera ports as a video source. The available channels are then allocated as the Layer 3 Enhanced CCTV Switch detects video sources on the NetVu Connected multi-channel server and allocates them to consecutive Port Free channels, starting at the port on which the video source is added. If the process encounters a channel that does not have “Port Free” status then the video source will be added to the un-allocated list; consecutive cameras will only be applied to channels that are Port Free. For example the Layer 3 Enhanced CCTV Switch has channel ports 1,3,4 listed as Port Free, 2 is an Analogue camera. If one 4 channel ICR encoder is added to camera 1. The result is; ► ICR Encoder - Camera 1 -> Camera 1 NVR ◄ ICR Encoder - Camera 2 -> Unallocated, Cameras ► ICR Encoder - Camera 3 -> Camera 3 NVR ► ICR Encoder - Camera 4 -> Camera 4 NVR. KBD USB NET AUDIO IN VID 1 MON B VID 2 VID 3 SATA1 OUT A VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16 ALARMS RELAYS SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ AUDIO IN OUT EXP O I IR MON A HDMI 1 VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32 NET SD Advanced Layer3 Enhanced CCTV Switch Port reserved for analogue connections on NVR Video source added to un-allocated list NET 1 NET 0 POE IN POWER VID IN SERIAL 1 SERIAL 2 1 3 4 Key Port Free Analogue Connection Single IP connected Single IP assigned Multiple IP connection 2 When a multichannel encoder is connected to the Layer 3 Enhanced CCTV Switch, the NVR will receive information from the encoder about how many cameras are connected. Channels set as Not Connected on the encoder, when presented to the Enhanced Layer 3 switch will not be eligible for Auto IP.

ICR encoder with three analogue camera inputs connected at positions 1, 3 and 4. Position 2 is not used. The Closed IPTV NVR would be auto configured on consecutive ports, camera 2 would not be allocated to port 2 which would be registered as assigned to a failed camera. KBD USB NET AUDIO IN VID 1 MON B VID 2 VID 3 SATA1 OUT A VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16 ALARMS RELAYS SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ AUDIO IN OUT EXP O I IR MON A HDMI 1 VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32 NET SD Advanced Layer3 Enhanced CCTV Switch Shows as Camfail Shows as Camfail NET 1 NET 0 POE IN POWER VID IN SERIAL 1 SERIAL 2 1 3 4 Key Port Free Analogue Connection Single IP connected Single IP assigned Multiple IP connection 2 Analogue channels take precedence. If an analogue camera is present and connected then it will only become Port Free if the channel is set to Not Connected on the Closed IP NVR configuration pages. The de-allocated cameras are added to the Camera->Unallocated Cameras page on the NVR, which shows a tabulated list of all unallocated cameras connected to the switch, showing all the camera details (DNS, Auto IP Address, MAC, Classification, Channel number and Native resolution). Each camera has a drop down list showing all ‘Port Free’ channels available for allocation to the video source. Any errors in setting up the cameras can be rectified by simply disconnecting and reconnecting the camera to the switch in whilst configuration mode, which will allow the camera to reallocate. If multiple changes are made, it is recommended that the NVR is reset after correcting the configuration to ensure perfect allocation. IMPORTANT: For further information refer to the Layer 3 Enhanced CCTV Switch manual

The unit can be configured either on the local monitor or over the network using a PC with Internet Explorer or similar browser. Both have near identical menu interfaces. Accessing the menus on a local monitor The Configuration pages can be displayed on a local monitor. When connected, press the MENU button on the IR Remote Control. Note: If the IR Remote Control does not open the configuration menus, press the DVR button to make sure it is in DVR mode, then press the MENU button again. Accessing the menus on a PC web browser Locating the Unit IP address The IP address of the unit is required to access the webpages. It can be identified from the configuration menu pages using the local monitor, press the MENU button on the IR Remote Control and navigate to the System Settings->System menu to find the DHCP assigned IP address. Note: The unit can be installed in a DHCP network environment where an IP address, subnet mask and default gateway will automatically be allocated from the network DHCP Server (DHCP is enabled by default). Note: If a DNS (Domain Name Server) address is not to be used, it is strongly advised that a fixed IP address be assigned (a DHCP assigned address can change without notification i.e. following power failure). A fixed IP address can be assigned via the Network Settings->Network menu. For information on locating the unit’s IP address via a PC and serial port connection, refer to Appendix D. Default DNS Address It is recommended that a DNS (Domain Name Server) address be configured. Assigning a recognisable name can help a remote user to locate the unit. If no System name is allocated to the unit, the default DNS address will be: machine serial number.yourdomain.com • is displayed in the System menu page and also on the underside of the unit. • is the name assigned to your DNS network. The default DNS address can be renamed via the System->Attributes menu. Following renaming, the DNS address will be:: yourname.yourdomain.com • ’ yourname‘ is the name assigned via the Network menu. Note: To activate an assigned DNS address, it will be necessary to reboot the unit. The unit can be rebooted via System -> Maintain-> Reset. IMPORTANT: To set the time and date on the unit, navigate to System Settings->Time and Date. 6.11

The unit can be configured using the webpages. To access these: 1. Launch Internet Explorer (or similar web browser package). 2. Type the URL for the unit (IP or DNS address). 3. The Opening menu page will be displayed. Configuring Closed IPTV It is only possible to change Closed IPTV settings when the system is in Configuration mode (Closed IPTV->Settings). The Closed IPTV logo in the top corner of the configuration pages gives a quick indication of whether the system is in Secure or Configuration mode. Dedicated Micros recommend the system is always left in Secure Mode unless Closed IPTV settings are actually being edited. Secure Mode Configuration Mode 6.13

Note: Not all buttons on the IR Remote Control are relevant for the Unit. Key Button Switches the Remote Control to ‘TV’ mode and sends codes understood by common TV sets. Switches the Remote Control to ‘DVR’ mode. Note the DVR mode is the default mode of operation. Toggle the speed of PTZ camera movement (two speeds available). Use the Zoom button to zoom in/out with a selected camera. Also used to zoom (x2) into Live or Playback images. This button will change the Zoom Keys operation to focus or iris functions (when available). Use this button to cycle through available cameras. This button should be pressed (followed by a numeric entry) to carry out auxiliary actions on a PTZ camera. Press the Menu button to enter the Configuration menus. Press the Exit button to exit the Configuration menus.

screens and accept changes. Also use for PTZ telemetry control of cameras. Use the Softkeys (Red, Green, Yellow, Purple) to directly access the corresponding function displayed on the menu screen. The Number pad should be used to select specific cameras and preset positions when available. Use the Playback buttons to interrogate recorded images. Use the LIVE button to switch from Playback or menus to a LIVE display.

Configuration menus, the Viewer menus and also several Download options. Note: The Download options will only be available if viewing remotely via an IP connection. Select the Configuration menu tab to access the unit’s Configuration menus, refer to ‘Navigating the Configuration Menus’ for further guidance. Select the Event Search tab to access the unit’s Event Search function, refer to ‘Event Search’ for further guidance. Note: The ‘Event Search’ option will only be displayed if ‘Enable Event Search’ is selected in the ‘Features’ menu: System Settings->Features. Select the Viewer menu tab to access the unit’s Viewer function, refer to ‘Unit Operation’ for information on the numerous Viewer features. Select the Download menu tab to access the various Download sub-options. Select from: • Product Manual Select to open an electronic version of the Installation & Operation Guide. • ObserVer Manual Select to open an electronic version of the NetVu ObserVer User Guide. NetVu ObserVer is a free video management software package from Dedicated Micros that allows users to seamlessly view distributed images from any ‘NetVu Connected’ product. • NetVu ObserVer Select to download the NetVu ObserVer video management software.

software is required to successfully view Configuration and Viewer menus remotely. IMPORTANT: By default, no Usernames and Passwords are required to access any of the various menus. Usernames and Passwords can however be added to regulate access to the Configuration and Viewer menus. Refer to the ‘Console Settings-> User Accounts’ menu for information on establishing Usernames and Passwords.

The menu tree provides access to the configuration menus. The configuration pages are navigated using the menu tree (displayed on the left of each page). Selecting one of the menu options will display the relevant page. Associated sub-menus will then be available. Relevant menus can also be accessed directly from other menu screens via the coloured softkey options shown at the base of each menu. The options available will depend on the menu being viewed. Select a softkey option by pressing either the corresponding button on the IR Remote Control (if viewing the menus locally), or by selecting the relevant option via the PC mouse (if viewing the webpages). Note: Any changes made via the webpages are automatically saved when the page is closed. To ‘manually’ save changes, select the Save option. IMPORTANT: The Closed IPTV logo gives a clear indication of when security is enabled. Secure Mode Configuration Mode

Press the MENU button to access configuration menus via a connected local monitor. The menu will have a red indicator highlighting the first option. Select a main menu heading to open a drop down list of further sub-options. Press the Down Directional button to highlight the next menu option, press OK on the highlighted menu. Press the Right Directional button to highlight the first editable parameter on the screen. Use the Left/Right/Up/Down Directional buttons to move between fields. Select OK to start editing a field (the option will be outlined in green). Use the Up/Down Directional buttons to change the settings within an editable field. Use the OK button to accept a new setting. Use the coloured softkeys to select the accompanying colour option on screen i.e. red button to select the red option. To undo changes made to any menu, select the Refresh (Purple) option. Note: See below for information on entering alpha-numeric data. Using the Front Panel Interface The Configuration and Viewer menus can be navigated and edited using the unit’s front panel interface (via a connected local monitor). Navigate the menu tree via the Up/Down Directional buttons. When a menu is highlighted, open by pressing the OK button. Use the Left/Right/Up/Down Directional buttons to move between fields. Select OK to start editing a field. Use the Up/Down Directional buttons to change the settings within an editable field. Use the OK button to accept a new setting. Use the Exit button to leave the Configuration pages and open the Viewer menu. Use the colour bar buttons (Red, Green, Yellow, Blue and Purple) to directly access the corresponding function displayed on the menu screen i.e. red button to select the red option. When viewing recorded images, use the Playback buttons (Play, Stop, Fast Forward and Rewind) to navigate the images. Use the Goto button to display the Goto menu. This menu can be used to display recorded images from a specific date/time. Refer to Unit Operation->GoTo Menu for further information. Use the Copy button to display the Copy menu. This menu can be used to copy recorded images to a connected USB device or disc. Refer to Unit Operation->Copy Menu for further information. Use the Live button to switch to display live images from a camera when viewing recorded images from the same camera. Use the Menu button to display the configuration menus. Note: See below for information on entering alpha-numeric data.

Numeric or text data is entered using the on-screen Virtual Keyboard (Arrow Key Editor). To display the Virtual Keyboard, navigate to the relevant text input box using the Directional buttons and double press the OK button twice on the IR Remote Control or Front Panel Interface. The Virtual Keyboard is displayed. Use the Directional buttons to move between characters, use the OK button to select a character. Select ‘Submit’ to enter details, press ‘Cancel’ to exit without entering any text. Alpha-numeric data can also be entered in either upper or lower case format by ‘multi-tapping’ a relevant button. For example, with the cursor located in the text entry window of the Virtual Keyboard, repeatedly tap button ‘2’ to cycle through the following characters: 2,A,a,B,b,C,c,2 etc. To select one of these characters, simply stop tapping the button when the chosen character is displayed. The cursor will then progress, ready for the next character entry. Note: A USB Keyboard (not supplied) can be connected via one of the USB ports on the unit. The USB Keyboard can then be used to enter alpha-numeric data via the local menus. Using a USB Mouse or the Webpages Navigate the menus by clicking the tabs displayed on the left of the menu headings (on the menu tree). The first option is highlighted with a red tab. Select a main menu heading to open a drop down list of further sub-options. Highlight an editable field by clicking on it directly. If viewing pages locally, enter alpha numeric data via the Arrow Key Editor (see above). If viewing remotely, enter via the PC keyboard. If available, click on the drop down menus to select settings. Note: A selected item in the drop down list will appear highlighted. Navigating away from a page (clicking on a different option on the menu tree) will automatically save any changed settings. To undo changes made to any menu, select the Refresh (Purple) option. Using a Supported Dedicated Micros Keyboard (DM/KBC1 & DM/KBC2) The unit can also be controlled using an optional Dedicated Micros keyboard. This is connected via the KBD connector on the rear of the unit and provides the same control functions as the I.R Remote Control. Note: Refer to ‘Using the optional Keyboards (DM/KBC1 & DM/KBC2)’ for further guidance.

the system software upgraded. The Attributes option displays details about the unit including the IP address, unit serial number, MAC address and software version. The Status page displays information about the unit’s operating condition, shows how long the unit has been operating and the reason for the last reset. It also shows camera status and displays any failed cameras. The Language page allows the system language to be set. The language can also be changed for the current session only. The Time and Date page allows the unit time and date settings to be adjusted, including setting the timezone. The Serial Ports page allows each of the four serial ports to be individually configured for one of a range of operations, including EPOS, debug, PPP and telemetry. The Audio page shows the settings available for each of the audio channels and allows configuration of audio quality. The Features page allows control of the different features that are available within the software including Email reporting, webcam support and control of the display resolution. The Maintain page allows the current configuration to be saved, and for previously saved settings to be loaded. It also enables easy upgrade of the system software. The PowerScript Mgmt page allows installed PowerScripts to be activated/deactivated on start-up.

unit’s serial number and the allocated DHCP IP address. Product Descriptor Details the product model. Serial Number Identifies the serial number of the specific unit. PCB Serial Number Displays the PCB (Printed Circuit Board) serial number of the unit. Product Code Displays a code identifying the unit’s specification. Earliest Recording Displays the date/time of the earliest recording held on the unit. System Name This field can be edited to allocate a name to the unit. This is displayed when the unit is accessed via NetVu ObserVer and is sent when transmitting information to a Remote Video Response Centres (RVRC). Video Standard Displays the video standard adopted by the unit i.e. PAL, NTSC. Number of Cameras Shows the number of camera channels on the unit. Global PPS Details the Global PPS (Pictures Per Second) recording rate for all cameras at 4CIF, 2CIF and CIF. Video Storage Gbytes Highlights the available video storage capacity in Gigabytes. MAC Address This is the MAC address assigned to the unit. IP Address This is the IP address allocated to the unit. Sub Net This is the subnet of the network where the unit is located. Gateway This is the IP address of the default gateway (router) assigned by the DHCP server.

(see below). Time/Date (Green) Select to open the System->Time and Date page. Accounts (Yellow) Select to open the Display->User Accounts page. Network (Blue) Select to open the Network->Network page. Refresh (Purple) Refreshes the information on the current page. Software Menu Software Revision This identifies the version of software the unit is running. Codec Revision This identifies the codec version the unit is running. Webpage Revision This identifies the webpage version the unit is running. Framestore Revision This identifies the Framestore Revision the unit is running. PC Apps Revision This identifies the revision archive of the Viewer and associated PC Apps software. Boot Software Rev. Displays the infrastructure componentry software revision. Help Videos Rev. This identifies the version of Help Videos installed on the unit. Note: Refer to ‘Go To Viewer->Help Videos’ for guidance on viewing the embedded Help Videos. Telem PIC Rev. This identifies the version of the Telemetry control device installed on the unit. Applet Version This identifies the applet version installed on the unit Note: Refer to ‘Display Settings->Viewer Defaults’ for guidance on using a remote applet (this can lessen load times when accessing multiple DVRs/Servers).

About (Blue) Select to open the Status->About page. Refresh (Purple) Refreshes the information on the current page.

operating and the time since its last reset. Status log information can also be exported via the ‘Export Logs’ option to either a CD-R/DVD-R or a USB device. Time since last reset Details the time since the unit was last reset. Total running time Details the total time the unit has been operational. Reset code The last reset code used is displayed. Restart reason The reason for the last restart is displayed. Codec Eight codecs are installed within the unit. Cameras are assigned to the codec in the following sequence. Each camera channel is listed within each Codec window, along with connection, recording and camera status information. Cameras Cameras assigned to each codec are displayed.. Connected Those camera channels with cameras connected will be highlighted light green. Those not in use will appear dark green. Recording Those camera channels that are currently recording are highlighted light green. Those not recording will appear dark green.

functioning correctly will be highlighted light green. Those deemed to have failed will appear red. Camera channels with no connected camera will appear dark green. Alarm Status (Yellow) Select to open to the Status->Alarm page. Rem Codec (Blue) Select to open to the Remote Codec Status page Refresh (Purple) Refreshes the information on the current page.

outputs. Alarm Contacts/Zones/Relay Outputs Alarm Contacts, Alarm Zones and Relay Outputs that are in an ‘active’ state are shown light green. ‘In-active’ ones appear dark green (not illuminated). Alarms (Blue) Select to open to the Alarm->Inputs page Refresh (Purple) Refreshes the information on the current page.

pages, refer to ‘Appendix J - Status Pages’ for a description of each page. System Information Select to open to the System->Attributes page. Software Revisions Select to open to the System Settings->System->Software page.

below. About (Blue) Select to open the System->Status->About page. Refresh (Purple) Refreshes the information on the current page.

pages. If required, the language can also be changed for the current session only. System Language Select to change the system language setting. Reset (Red) Select to reset the unit. Note: The unit MUST be reset to implement system language changes, refer to System Settings->Maintain for guidance on resetting the unit. Session Language Select to change the language settings for the current session only. Choose Select to immediately activate session language changes. Reset (Red) Select to cycle the power to the unit. Refresh (Purple) Refreshes the information on the current page.

This menu allows the time and date to be set on the unit. Required timezone information can also be established and the unit time synchronised to that of the PC being used to view the webpages. System Time The current system time and date is displayed. Current Time Zone Displays the currently selected time zone settings. Time Format As default, the time displayed is in 12 hour format. This can be changed to 24 hour if required. Date Format As default, the date is entered dd/mm/yy. It can also be displayed as mm/dd/yy or yy/mm/dd. Set Time Enter a current time for the unit. Set Date Enter a current date for the unit. Set Time (Green) When current time/date as been entered, select this button to implement changes. Time Zone Select the relevant timezone offset from the accompanying drop down menu. SNTP Server A Simple Network Time Protocol (SNTP) server allows external devices to connect and set their current date and time settings to that of the SNTP. If required, enter the SNTP server IP address here. Note: It is recommended that an SNTP server is configured. Suitable networked SNTP servers can be found here: http://support.ntp.org/bin/view/Servers/NTPPoolServers

administrator for further assistance. PC Time Displays the system time of the PC currently being used to view the webpages. Sync Time (Blue) Use this button to synchronise the time of the unit to that of the PC being used to view the webpages. Note: The PC Time and Sync Time options will only be available if viewing the menu via the webpages. Reset (Red) Select to cycle the power to the unit. Set Time (Green) When current time/date as been entered, select this button to implement changes. System (Yellow) Select to open the System->Attributes page. Sync Time (Blue) Use this button to synchronise the time of the unit to that of the PC being used to view the webpages. Refresh (Purple) Refreshes the information on the current page.

installation information. Serial Port These are the four serial ports available. Port Config The serial ports can be configured to specific uses. Select from: None Switches port off Debug Sets port for serial communications PPP Sets port for Point to Point Protocol Telem Sets port for Telemetry purposes Comm Sets port for Comms purposes EPOS Sets the serial port for connection to an EPOS (Electronic Point Of Sale) device Note: It is recommended that Serial port 1 be set for ‘Debug’ operations. Interface Type Choose the type of serial interface being used. Select from RS232, RS485 or RS422. Baud/Parity/Data/Stop/Flow Control These options allow the Serial port communication settings to be configured. Note: When a telemetry protocol is selected, these settings will default to pre-determined values and should not normally be altered.

unit. Note: Refer to ‘Appendix G’ for a full list of supported telemetry protocols. Reset (Red) Select to cycle the power to the unit. Maintain (Green) Select to open the System->Maintain page Text In Img (Yellow) Select to open the Features & Text->Text->Text In Image page Camera (Blue) Select to open the Camera Configuration page (below). Refresh (Purple) Refreshes the information on the current page. Camera Configuration This page allows configuration of some features on all 32 channels available to the unit. Title Titles assigned to each camera are displayed. Mode The settings will default to ‘Colour’. If Monochrome cameras are used, select ‘Mono’. Selecting ‘Mono’ will remove colour patterning. If a particular channel is not in use or the camera has failed, select ‘Not Connected’. ‘Remote Codec’ is used for NetVu Connected video sources. ‘IP Camera’ is used for all NetVu Connected cameras and 3rd party units. Term The unit will automatically terminate the camera input with 75Ω. This should be disabled if the video feed is looped through to another device.

connection failure (video loss). Buzzer Select this option to activate the onboard buzzer to report in the event of camera connection failure (video loss). Cam Setup (Red) Select to open the Camera->Setup page Serial (Blue) Select to open the System->Serial page Refresh (Purple) Refreshes the information on the current page.

from camera inputs via input 2. Challenge audio i.e. originating from an Operator using NetVu ObserVer at a Remote Video Receiving Centre (RVRC) can be recorded via input 1. This combined audio is then available on Audio Output 1, refer to ‘Installing the SD Excel for audio hardware installation information. Audio 1/2 Use the drop down box to assign an audio function to each input, ‘Local’ is Audio recorded from local inputs, ‘Challenge’ audio originates from an Operator using NetVu ObserVer at a Remote Video Receiving Centre (RVRC). Audio Recording Select ‘Enable’ to activate Audio recording. Note that this is a global action which when Enabled, will result in all audio received by the unit being recorded to the HDD. Record Audio Challenge Select this option to record an audio challenge received via an IP connection i.e. originating from a remote client. Record Gain This option allows the Record Gain level to be set. This is the base setting from which the AGC (Automatic Gain Control) will operate. Select from 1 to 15. The default and recommended setting is 15. Playback Volume Select a volume setting between 1 to 64 for audio playback. Record AGC Select this option to activate the AGC function. AGC helps produce a better quality recording by removing background noise/distortion. Record uncompressed Select this option to record audio in an uncompressed format.

Reset (Red) Select to cycle the power to the unit. Refresh (Purple) Refreshes the information on the current page.

menus: System, Network, Video and Other. System User Logging Enable this option to activate User Logging. Refer to ‘Appendix C’ for further information regarding the User Logging function. Enable External Modules Select to enable any connected RS485 alarm modules. Text in Images Select this option to activate the Text in Images function, refer to ‘Text- Text In Image’ for more information. Note: When de-selected here, the ‘Text in Image’ menu will no longer be displayed in the menu tree. Email Reporting Select this option to activate the Email Reporting function, refer to ‘Network Settings->Email’ for more information. Note: When de-selected here, the ‘Email Reporting’ menu will no longer be displayed in the menu tree. Keyboard Enable (485 bus) Select this option to enable the Keyboard 485 Bus. Remote Reporting Select this option to activate the Remote Reporting function, refer to ‘Network Settings-Remote Reporting’ for more information. Note: When de-selected here, the ‘Remote Reporting’ menu will no longer be displayed in the menu tree.

Select this option to enable automatic FTP downloads to upgrade the unit and/or the webpages, refer to ‘Network Settings-FTP Download’ for more information. Note: When de-selected here, the ‘Automatic FTP Download’ menu will no longer be displayed in the menu tree. SMB Server Support Select this option to activate the SMB (Server Message Block) file sharing function. When activated, the SMB protocol allows the unit to access PCs operating the Windows operating system (and Linux machines running Samba). This enables sharing of files and directories to/from the unit. The name of the SMB Workgroup on the network must be correctly entered in the SMB Workgroup option (see below). It is important that the Server Name assigned to the unit via ‘Network Settings->Server Name’ is unique within the workgroup being used. To access the unit via a PC running SMB (and has access to the same Workgroup); open My Network Places-Entire Network- Microsoft Windows Network. The Workgroup containing the unit and PC(s) should then be available. Files and folders can then be copied/added as required. Note: Use the 10/100Mbps network option ‘Net 2’ for SMB purposes (the unique Server Name must be assigned via ‘Network Settings-Server Name’). Camera Masking Select this option to activate the Camera Masking function. When activated, any attempt to cover a connected cameras lens will be noted and an alarm event will be logged. System (Red) Select to open the System->Features->System page Network (Green) Select to open the System->Features->Network page Video (Yellow) Select to open the System->Features->Video page Other (Blue) Select to open the System->Features->Other page Refresh (Purple) Refreshes the information on the current page.

If the default port setting for web serving has already been allocated, it is possible to configure a second port number i.e. the secondary web port can be set to 8000 if the default web port (80) is blocked by the network or firewall. Telem UDP Port Selection Select ‘Automatic’ to enable the unit to select a suitable port for telemetry purposes. Select ‘Default’ to use the default port settings (1025). Select ‘User Defined’ to use settings entered in the ‘Telemetry Port’ option. Samba Workgroup Enter the name of the Samba workgroup to enable sharing of files and directories to/from the unit. To access the unit via a PC running SMB (and has access to the same Workgroup); open My Network Places- Entire Network- Microsoft Windows Network. The Workgroup containing the unit and PC(s) should then be available. Files and folders can then be copied/added as required. Max Client Connections This setting limits the number of client connections to the server. The default value is 256 but could be increased if there is heavy network traffic. ARP Cache Size This setting limits the number of cache entries available in the ARP table. The default setting of 256 is adequate for most instances TCP Reassembly Queue Limit This setting limits the maximum number of TCP segments allowed in the reassembly queue, to protect against a common DoS attack.

Each camera can work as a remote codec for one NetVu Connected server. This is the most efficient means of connection to a DM Closed IPTV server as the camera generates the viewing and recording streams directly in the format required, so the server does not need to reprocess them. The status shows whether or not the camera is bound to a server as a remote codec, and if so, it identifies the server it is bound to. System (Red) Select to open the System->Features->System page Network (Green) Select to open the System->Features->Network page Video (Yellow) Select to open the System->Features->Video page Other (Blue) Select to open the System->Features->Other page Refresh (Purple) Refreshes the information on the current page. Video Detected Video Standard The unit automatically detects the video standard being used i.e. PAL/ NTSC. Video Resolution (h x v) Allows selection of the resolution, options are 704 x 576, 704 x 512 and 640 x 512 Deinterlace Filter When Enabled, this option will improve the appearance of moving objects by applying a deinterlace filter that minimises the comb effect that can be visible when recording high motion scenes in 4CIF mode. It is recommended that this option be enabled when recording in 4CIF mode. Comb Filter Enable this option to activate the Comb Filter function. Comb Filter can help improve the fine details of a video signal image by filtering the luminance and chrominance separation process.

circumstances this should always remain enabled, however it can be useful to disable the feature when conducting maintenance. Partial Full Duplex Select to enable the Partial Full Duplex option. This feature is only relevant when viewing in mulitiscreen mode above quad. When selected (and viewing in MPEG mode/multiscreen above quad); only the recorded I frames are displayed and not the P frame data. Segment Aspect Ratio This setting control how a 4:3 image is displayed in a multi-screen or wide screen format on the local viewer. The available display segment changes depending on the number of multi screen images selected for display. Stretch forces the image to fill the available display segment. This may result in some distortion of the display image. Zoom Fit forces the frame to fill the available segment completely and proportionally. Consequently some of the image at the top and bottom of the frame may be cropped. Frame Fit forces the frame to fill the available segment proportionally, resulting in black bars left and right on some multi display choices. Note: There is no cropping or distortion on the recorded image, these settings are for display only. System (Red) Select to open the System->Features->System page Network (Green) Select to open the System->Features->Network page Video (Yellow) Select to open the System->Features->Video page Other (Blue) Select to open the System->Features->Other page Refresh (Purple) Refreshes the information on the current page

Configures the unit to update all system variables required for an automatic upgrade without requiring confirmation. Do not check this box if you run a customised applet. Enable event search page Select to enable the Event Search option. When enabled, the option will appear within the Configuration Menu tree. Refer to ‘Navigating the Configuration Menus->Event Search’ for further details. Enable RVRC page Select this option to activate the RVRC Remote Set/Unset/Override function, refer to ‘Record Settings-RVRC’ for more information. Note: When de-selected here, the ‘RVRC’ menu will no longer be displayed in the menu tree. System (Red) Select to open the System->Features->System page Network (Green) Select to open the System->Features->Network page Video (Yellow) Select to open the System->Features->Video page Other (Blue) Select to open the System->Features->Other page Refresh (Purple) Refreshes the information on the current page.

DVD-R or a connected USB device. Current unit settings can also be saved for future use and previously saved settings restored. Configuration Default (Green) Select to return the unit to its factory default settings. Note: Selecting the Default button will cause the system to reboot. Save (Purple) Select to save current unit settings to the selected media. Restore (Blue) Select to restore previously saved settings from the selected media. Note: Selecting the Restore button will cause the system to reboot. To/From Select the relevant media device to save to or restore from i.e. USB or CD-R/DVD-R. Export Logs Export Logs (Yellow) Select to export all Logged data to a connected external device. To Select the relevant media device to save to export to. Server Reset (Red) Select to cycle the power to the unit. IMPORTANT: To upgrade the unit, insert a media device containing relevant software upgrades and select ‘Reset‘.

www.dedicatedmicros.com Note: Selecting the Default button will cause the system to reboot. Save (Purple) Select to save current unit settings to the selected media. Restore (Blue) Select to restore previously saved settings from the selected media. Note: Selecting the Restore button will cause the system to reboot. To/From Select the relevant media device to save to or restore from i.e. USB or CD-R/DVD-R. Export Logs To Select the relevant media device to save to export to. Server Reset (Red) Select to cycle the power to the unit. Reset (Red) Select to cycle the power to the unit. Default (Green) Select to return the unit to its factory default settings. Export Logs (Yellow) Select to export all Logged data to a connected external device. Restore (Blue) Select to restore previously saved settings from the selected media. Save (Purple) Select to save current unit settings to the selected media.

select/deselect installed PowerScripts, then select Save (Green). A system reset will be required for the changes to take affect. Note: Changes this page will alter the ‘Default.C’ file. If you already have a custom PowerScript on your unit which uses Default.C, please contact Dedicated Micros Technical Support for guidance Tel: +44 (0) 845 600 9502 for further guidance. Reset (Red) Select to cycle the power to the unit. Save (Green) Updates the DEFAULT.C file on the NVR to enable selected scripts on reboot. Refresh (Purple) Refreshes the information on the current page.

safe, secure and simple. Combining patent-pending innovation with zeroconf networking technology, Closed IPTV automatically allocates IP addresses to IP cameras by physical port. This ground breaking solution provides a very simple and secure answer to IP Video, meaning that no prior knowledge of IP networking is required. The menus under the Closed IPTV heading become active when the Closed IPTV feature has been enabled and there is at least one Layer 3 Enhanced CCTV Switch connected. The Settings page provides access to the majority of configuration options for the feature, and is used to enable configuration of the switches, setting the security and access features whilst also giving an overview of the port status of each connected switch.. The Discover page allows automatic discovery of Layer 3 Enhanced CCTV Switches connected to the Closed IPTV NVR. The Upgrade Switch page allows connected Layer 3 Enhanced CCTV Switches to be quickly, easily and securely upgraded. The Advanced page allows switch base camera numbers to be set, and camera details to be synchronised automatically. Configuring Closed IPTV It is only possible to change Closed IPTV settings when the system is in Configuration mode (Closed IPTV->Settings). The Closed IPTV logo in the top corner of the configuration pages gives a quick indication of whether the system is in Secure or Configuration mode. The main display will also say if the unit is in Configuration mode. Dedicated Micros strongly recommend the system is always left in Secure Mode unless Closed IPTV settings are actually being edited. Secure Mode Configuration Mode

menu item. The on-screen image of the Layer 3 Enhanced CCTV Switch provides instant information regarding camera connection ports. It is advisable to only allocate ONE camera (analogue or IP) to each available port. Each Layer 3 Enhanced CCTV Switch has a rotary dial on the base to allow a unique (in the cascade) identifier to be set. Port to Channel mappings are allocated using a combination of this rotary dial and the ‘Base Camera’ setting on the Closed IPTV settings menu. KBD USB NET AUDIO IN VID 1 MON B VID 2 VID 3 SATA1 OUT A VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16 ALARMS RELAYS SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ AUDIO IN OUT EXP O I IR MON A HDMI 1 VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32 NET SD Advanced Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch EcoSense NVR Default Settings Switch No Camera Nos 0 1-16 1 17-32

Port Free (Black) █ No video source currently connected to the port and nothing assigned to that channel. Analog Connection (Blue) █ Analogue camera input using the BNC connection for this channel on the back of the NVR. Analogue cameras take priority over IP cameras when channels are being assigned; if an IP camera is put into the port on the switch associated with an a channel allocated to an analogue input, the IP camera will go into the un-allocated camera list and the port icon will turn orange to signify Duplicate Port Allocation (see below). Single IP Connected (Green) █ A single IP camera is connected directly to the port and will be auto assigned to the channel. Single IP Assigned (Turquoise) █ A camera that has either ; been configured manually independently outside Closed IPTV or is one of the cameras (above camera 1 of the encoder) assigned by Closed IPTV by connecting a multi channel encoder. Multiple IP Connections (Yellow) █ A port that is hosting a multiple channel input eg a connection to a multi channel encoder. The cameras after this are treated by the NVR as Single IP Assigned. Duplicate Channel Allocation (Orange) █ A port that has analogue and IP connection applied to it. The IP source will be un-allocated. Unknown (White) A port which has detected a network connection but the type of connected device is not recognised. Security Level Select from Configuration Mode’ or ‘Secure Mode’. In Configuration mode; ● The security settings of all cascaded Layer 3 Enhanced CCTV Switches can be globally edited ● The configuration of all endpoints (video sources) connected to the attached Layer 3 Enhanced CCTV Switch can be globally edited. Use this mode when configuring or adding additional servers to a Closed IPTV system only. The switch is not secure in this mode, but it allows the NVR to discover cameras and additional switches. Cameras can be physically swapped around and configured by the user as required. Note: In Configuration mode, there is no registration of a camera fail. The cameras are either in a not connected state or connected when present. In Secure Mode; ● Closed IPTV security is enabled and the selected security settings (determined by the configuration check boxes) are applied. ● End points (video sources) will become trusted for NetVu Connected Cameras. When in this mode access is restricted by a number of techniques, including Restrict between end points, Restrict Public Access, Restrict multicast from general network and Lock ports by MAC (below). Note: In Secure Mode, video sources are either successfully connected or port free. A configured source that is not sending data will be registered as a camera fail. NOTE: Secure mode should always be enabled once configuration is complete. If left in Configuration mode the system will be insecure and vulnerable to attacks. A visible warning will be displayed on the local viewer if Secure mode is not applied.

video sources, which could be exploited as potentially insecure connections into the Closed IPTV network. This option acts as a hard firewall to stop exposed end points from being used to mount attacks on other cameras in a different location (e.g. prevents a camera in a public location from affecting a camera in the safe vault). Restrict public access (Port B) Select to restrict all network data between the General/Corporate network to the video end points. No outside connections except the NVR are allowed to communicate with end points directly, and endpoints are separated from the General/Corporate Network.. Note: The NVR itself on standard DHCP or static IP address will still be accessible from Eth-B if physically connected to network. Note Non NetVu Connected cameras will only be allocated DHCP addresses by the external network if this option is disabled. Warning: If this option is not enabled it will still be possible for external systems connected to the general corporate network (via port Eth-B) to access all camera/video sources. Dedicated Micros recommends that Eth-B should always be left restricted in Secure Mode as security can be compromised if left unrestricted. Additional Closed IPTV systems should always be added in Config mode to allow auto IP configuration to accommodate existing systems and avoid ip conflicts. Restrict multicast from general network This disables client network access to the multicast services on the camera, but does not disable standard web access for camera configuration etc. unless ‘Restrict public access’ is also enabled. If this option is ticked, it only allows clients to receive multicast video data through SAP service group broadcasts from the NVR. Warning: Multicasting requires this option is disabled to ensure public access is unrestricted. Lock ports by MAC Camera ports on the Layer 3 Enhanced CCTV Switch can be locked to the MAC address of the camera connected to that port. This prevents casual access from the port to the rest of the system (DVR, other cameras). No other MAC address will be allowed on that port. This allows multicast, direct camera access etc but protects the client network to a limited degree from the exposed end point. Signature Verify Remote Codecs More sophisticated attackers could bypass the Layer 3 Enhanced CCTV Switch MAC address rules (described in ‘Lock Ports by MAC’) by spoofing the MAC address of the camera connected to the port. We can identify such attackers using Trusted Endpoint Signature Verification of the video stream. Warning: If this option and ‘Lock ports by MAC’ is not enabled then cameras or other devices can be swapped in and out of the port with no restrictions on their network data i.e. an alternative ‘hacked’ video source could be introduced to the Layer 3 switch in place of a legitimate source. Restrict End Point Access to NVR To limit the potential intrusion methods available from the camera ports, the standard set of TCP and UDP services on the NVR can be completely disabled to traffic from the camera ports. If a camera has been swapped for a device that has been given a spoof MAC address the NVR will still only accept data from that connection via the usual HTTP port. The port can only supply video, and this will be flagged as unsigned due to the Trusted Endpoint feature (if enabled).

On detection of a security breach this option will prevent any device connected to the breached port from accessing the general corporate network (if available). Video will continue to be streamed on the Closed IP side of the network.Reconnect after Reconnection to the network will be attempted after a security breach once this period has elapsed. If the security breach is detected again, connection to the public network will remain blocked. Isolate from Closed IP If a security breach is detected, the video source is isolated from the Closed IPTV network. Generate system event Select this option to report port violation as system events which can be used as a input to an alarm zone (e-mail, alarm etc ) on the NVR. Overview (Red Button) Select to open the Camera -> Overview page. Discover (Green Button) Select to open the Closed IPTV -> Discover page which can be used to force discovery of all Layer 3 Enhanced CCTV Switches connected to the NVR. Unalloc (Yellow Button) Select to open the Camera->Unallocated Cams page. Advanced (Blue Button) Select to open the Closed IPTV->Advanced Page, refer to ‘Advanced’. Refresh (Purple) Refreshes the information on the current page.

Enhanced CCTV Switches connected to the NVR. When a switch is connected, the NVR will automatically discover and connect to it. The Layer 3 Enhanced CCTV Switch supports zero-conf networking (sometimes known as Bonjour), which enables automatic discovery of cameras on the IP network. Zero- conf uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers. Variable The parameter being passed by the discovered switch. There is the capability to show 16 switches, each switch detail is separated by a comma. Value Details the appropriate port variable value. CIP Settings (Red) Select to open the Closed IPTV->Settings page Discover (Green Button) Information on the switches seen by the NVR is updated in the table. Refresh (Purple) Refreshes the information on the current page.

Layer 3 Enhanced CCTV Switch are included in the upgrade files for the SD Excel and are loaded to the switch from the NVR. Once a switch is connected and auto-discovered, the connected NVR can upgrade it. Select the switch to be upgraded and press the Upgrade button. The NVR sends the required file to the switch and automatically restarts it. Upgrade Switch Use the drop down to select the switch to be upgraded, or upgrade all switches using the ‘All Switches’ option. Progress The entry shows the status of the switch upgrade. CIP Settings (Red) Select to open the Closed IPTV->Settings page. Upgrade (Yellow) Begins the forced upgrade of the switch. Refresh (Purple) Refreshes the information on the current page.

camera number of a switch. Auto-Synchronise NVR variables with cameras When a new camera is connected and the unit is in configuration mode, the NVR will synchronise some of the settings (eg camera title) with the camera. Synchronisation will only occur for Remote Codec cameras (ie NetVu Connected cameras/video servers) and only in configuration mode. Switch Displays the switches that have been found and accepted by the NVR, refer to ‘Discover’. Base Camera Each switch can have up to 16 video sources attached to it. A switch may not have all ports configured with a video source, so there may be more than two switches attached to the NVR. This option sets the base camera number on the selected switch, all subsequent video sources on that switch will receive a consecutive number.

page. Each Layer 3 Enhanced CCTV Switch has a hardware configuration dial on the base to allow a unique (in the cascade) identifier to be set. This identifier is used by this configuration page to configure the base camera number. KBD USB NET AUDIO IN VID 1 MON B VID 2 VID 3 SATA1 OUT A VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16 ALARMS RELAYS SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ AUDIO IN OUT EXP O I IR MON A HDMI 1 VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32 NET SD Advanced Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch Layer3 Enhanced CCTV Switch EcoSense NVR Cameras Displays the camera numbers that have been assigned to the switch by the Closed IPTV NVR. The NVR recognises how many cameras are attached to the switch and assigns cameras numbers accordingly. Example Settings Scenario 1 - One switch - 16 Analogue cameras attached to SD Excel CIP Switch Hardware Setting No. of Cameras Base Camera Camera numbers 0 16 17 17-32 Scenario 2 - Two switches - 0 Analogue cameras attached to SD Excel CIP Switch Hardware Setting No. of Cameras Base Camera Camera numbers 0 16 1 1-16 1 16 17 17-32 Scenario 3 - Two switches - 8 Analog Cameras (ports 7-16) Switch Hardware Setting No. of Cameras Base Camera Camera numbers 0 8 1 1-8 1 4 17 17-20 Scenario 4 - Three switches - 0 Analogue Cameras Switch Hardware Setting No. of Cameras Base Camera Camera numbers 0 8 1 1-8 1 4 9 9-12 2 4 13 13-1 Scenario 5 - Four switches - Geographically dispersed IP cameras Switch Hardware Setting No. of Cameras Base Camera Camera numbers 0 4 1 1-4 1 4 5 5-8 2 3 9 9-11 3 5 12 12-16 Note: Analogue cameras connected to the rear of the unit will take priority over IP cameras connected via a Layer 3 Enhanced CCTV Switch. An IP camera connected into a channel that is occupied by an Analogue camera will be ‘bumped’ onto the Unallocated Cameras list to allow it to be assigned to a free channel. CIP Settings (Red) Select to open the Closed IPTV->Settings page Refresh (Purple) Refreshes the information on the current page.

User Account details to be viewed and changed. The Remote Monitors page allows monitors not physically connected to the unit to view camera images received by the unit. The Viewer Defaults page allows the Viewer menu settings to be configured. The Display page controls how the local monitors present information. They control whether text will be displayed on the Main or Spot monitors, the colour of that text, and how long cameras being displayed in sequence will be shown on screen. The Maps page allows images to be imported and used as maps displayed in the Viewer menus. Hot spots can be added to allow quick navigation to individual cameras. The Map Data page allows Map Config information to be saved for future use. Previously saved data can also be uploaded. The User Accounts page helps protect configuration procedures by limiting access to specific users via accounts and passwords.

unit. The IP address of the server connected to the monitor (or video wall) is required. Cameras can then be selected via the remote monitor Up to 16 remote monitors (or video walls) can be configured. Enter the IP address of the server connected to the monitor. Refresh (Purple) Refreshes the information on the current page.

more information regarding this feature. Default settings can be configured for accessing the Viewer function via a local monitor and also remotely via a network connection. Local settings also determine the quality of video streams received from a remote client i.e. in Remote Monitor operation. Note that this does not affect live or playback images originating from local system cameras. Default Image Format Images from connected cameras can be displayed in either JPEG or MPEG format. Default Full Req Images displayed full screen in the Viewer menus can be shown in either High Medium or Low resolution. Default Quad Req Images displayed in Quad format in the Viewer menus can be displayed in either High Medium or Low resolution. Default Multi Req Images displayed in Multi format in the Viewer menus can be displayed in either High Medium or Low resolution. Default Multi Display When accessing the Viewer function, select the display format which will initially be displayed. Startup Multi Display When accessing the Viewer function, select the display format which will initially be displayed.

will initially be displayed. If one of the multi display formats has been selected via the ‘Startup Multi Display’ option, the camera channel selected here will be displayed in first (top left) position. Subsequent camera channels will be displayed in sequential order. Video Output mode Select the display output that best suits the viewing monitor. Typically PAL Default is most suited for a CRT monitor. Select from: Safe Mode PAL Default PAL Reduced HD Default HD 4X3 Note: It will be necessary to reboot the unit to implement any change to the Video Output Mode. The unit can be rebooted via the Reset (Red) option. Note: If there is no suitable standard configuration to suit the monitor in use, refer to ‘Appendix H - Monitor Output’ for details on enabling more options. Applet Location The location of the unit’s Viewer menu applet is displayed. The default location will always be the applet installed on the unit. If accessing multiple units via a remote connection, all can be assigned the same Viewer applet. This will lessen the load time required when accessing different DVRs/Servers. For example, if a local unit and a remote DVR are to be accessed, it is possible to set the Applet location for both DVRs as the local unit. If viewing the unit remotely, Dedicated Micros provide a remote applet. This remote applet can be selected via the ‘Set Location’ option. The applet is located on the website (www.dedicatedmicros.com/software_ release/index_firmware.php). Due to possible bandwith restrictions on the network the DVR is located, using this remote applet may improve data transfer speeds. Set Location Select the applet location. Choose from ‘Default location’ i.e. the applet installed on the unit; or the ‘website’ option i.e. the remote applet. Reset (Red) Select to reset the unit and implement any changes made to the ‘Video Output mode’ or ‘Applet Location’ fields. Refresh (Purple) Refreshes the information on the current page.

Main monitor text It is possible to select text to be displayed on the main monitor. The text displayed will include; time, date, mode of operation (Set, Unset or Override), camera number and camera title. Background Colour A black background appears by default around the text. It is possible to change the colour of this background. Select from the options available in the drop down list. Text Colour The colour of the displayed text can be changed. Select from the options available in the drop down list. Sequence Dwell (secs) The sequence dwell time can be set from 5 to 99 seconds. The dwell time is the period a camera’s images are displayed before switching to the next camera in the sequence. Sequence main on startup Select to sequence live views from all connected cameras on the main monitor upon system start-up. Enable custom segment setup Select to activate the custom segment setup feature. When selected, a user can configure a Quad or Multiscreen layout via the Viewer menu. The configured layout can include any camera in any available segment. Camera selection switches to full screen Select to auto switch to full screen mode any camera channel selected from multi-display (selected via the Viewer feature).

It is possible to select text to be displayed on the spot monitor. The text displayed will include; time, date, camera number and camera title. Spot Sequence Dwell The spot sequence dwell time can be set from 1 to 99 seconds. The dwell time is the period a camera’s images are displayed on a connected spot monitor before switching to the next camera in the sequence. Spot Sequence Setup All of the unit’s camera input channels are shown. To include any of these camera channels in the spot monitor sequence, selected the accompanying tickbox. Select All (Blue) Select to add all available cameras to the Spot Monitor Sequence. Refresh (Purple) Refreshes the information on the current page.

The map can then have hotspots added to allow quick navigation to individual cameras. An overview ‘System Selection Map’ can also be added to navigate between different systems. Configure Map Leave as ‘Local System Map’. This is the map from which connected cameras can be accessed. Graphic Location Enter the location of the relevant map graphic, including the full I.P address of the server holding the map. The map image will be displayed if linking is successful. The linked map can be in gif or jpeg format and should not exceed 500 by 350 pixels. Map Screen Offset These coordinates represent the top left corner of the map graphic as displayed in the Viewer menu. Camera Select Select which camera is to be linked to the created hotspot. Activate Hotspot Select to activate and display the camera hotspot. Hotspot Radius Enter the radius (in pixels) of the hotspot. Increment by If using the Decrement (Red) or Increment (Green) buttons, enter the size (in pixels) that the hotspot will increase/decrease. Decrement (Red) Select to reduce size of hotspot. Increment (Green) Select to increase size of hotspot.

Use to position the centre of the hotspot along the X axis e.g. entering 20 would place the hotspot centre 20 pixels from the left edge of the map. Hotspot Y coord Use to position the centre of the hotspot along the Y axis e.g. entering 20 would place the hotspot centre 20 pixels from the bottom edge of the map. Note: The hotspot can also be positioned by clicking directly on the map. Hotspot Origin (deg) This option should be used when the hotspot relates to a Dedicated Micros Oracle Dome camera. Clicking the hotspot will send the Oracle Dome camera to a pre-determined view (absolute positioning). However if the dead centre of the hotspot is selected, the camera will be viewed from its current location. The absolute positioning point will depend on the data entered here. A setting of ‘0’ would result in the camera facing its Original (base) position. To change the preset position, enter a number between 1 and 360. A setting of 20 would set the preset position to 20 degrees to the right of its ‘origin’ position, 180 would send it to face in the opposite direction (of its base position) . Refer to the ‘Viewer Menus-Program menu‘ for information on establishing an Origin position for a PTZ camera. Decrement (Red) Select to reduce size of hotspot. Increment (Green) Select to increase size of hotspot. Map Data (Yellow) Select to open the Display->Map Data page Refresh (Purple) Refreshes the information on the current page.

saved and stored for future use, or used between multiple units. Note: The Map Data menu will only be available when viewing the menu pages remotely i.e. via the webpages. To save map data, highlight and copy all text displayed in the Map Data text window, then save this data as a text file. To import data, copy relevant text from an external location and paste into the Map Data text window. When the menu is exited, this data will be used as the Map Config settings. Note: If importing data, remember to first save any current map data as required. Map Config (Yellow) Select to open the Display->Map Config page Refresh (Purple) Refreshes the information on the current page.

Account Types The available account types for which users and passwords can be assigned privileges are: • Admin FTP Assigning username and password requirements for the Admin FTP function will limit access to the unit via an FTP connection. • Video FTP Assigning username and password requirements for the Video FTP function will limit access to the Video FTP archiving feature (used with NetVu ObserVer). • Telnet Assigning username and password requirements for Telnet connections will limit Telnet access to the unit (Telnet can be used to upgrade the unit). • Serial Assigning username and password requirements for Serial connections will limit access via a Serial link.

will limit access to the Configuration menus when viewed locally. When implemented, the user will be prompted for a username and password before access to the Configuration menus (via the main menu) will be granted. • Local Users Assigning Local Users access privileges will limit access to the Viewer pages for local users. When implemented, the local user will be prompted for a username and password before access to the Viewer pages (via the main menu) will be granted. • Remote Users Assigning Remote Users access privileges will limit access to the Viewer pages for remote users. When implemented, the remote user will be prompted for a username and password before access to the Viewer pages (via the main menu) will be granted. When granting access privileges to Local and Remote Users, it is possible to limit access to specific cameras. Using the Camera Selection segment of the Add New Account menu, enter those cameras for which access will be permitted. Select the cameras in accordance with the input channel they’re connected to on the rear of the unit. For example, if wanting to allow access to camera 1 to 3 inclusive, enter: 1-3. If wanting to grant access to cameras 1,3 and 6, enter 1,3,6. If no camera data is entered, access will be allowed to all connected cameras in both live and playback modes. Note: There are no default usernames and passwords for any of the Account Types. If none are assigned, access will be granted to all users and no request for a username and password will be made. Account List When an Account Type is highlighted, details of users with access will be displayed. Add Highlight an administration feature i.e. Serial and select ‘Add’. Enter the new User Name and Password. That user’s name will now be displayed in the account list. Modify/Delete To modify or delete a user’s settings, highlight the user in the list and press the relevant button to Modify or Delete. IMPORTANT: If passwords are implemented and then forgotten, it is likely the unit will need to be returned to Dedicated Micros for unlocking. Add (Red) Highlight an administration feature i.e. Serial and select ‘Add’. Enter the new User Name and Password. That user’s name will now be displayed in the account list. Modify (Green) To modify user setting, highlight the user in the list and press to Modify. Delete (Yellow) To delete a user, highlight the user in the list and press to Delete.

menus for further details. The Setup page allows the quick configuration of all connected local camera channels (with a dynamic preview available). The Overview menu details the general settings assigned to each of the local camera channels. The IP Stream Inputs menu allows the selection of High, Medium and Low resolution settings for video sources originating from a network based source i.e. IP Server. These streams are configured on the remote device. This feature is predominately intended for use with 3rd party IP camera streams (connected via the 3rd party IP camera unlock feature). The Intelligent PTZ menu details the Dedicated Micros Oracle Domes connected to the Closed IPTV System. The Unallocated Cams menu details the cameras that are available to the ClosedIPTV system but are not assigned to a camera channel. This will normally be because a BNC (Analog) camera has been allocated the same channel as and IP camera, which has become automatically unallocated.

IMPORTANT: The menu options displayed will differ depending on the camera ‘Type’ and ‘IP Mode’ selected. Note: Ideally any setup options available locally on the camera should first be used to best obtain a suitable image quality. Mono/Colour Camera Camera Select a camera channel for review and adjustment. Camera Nuisance Count This is a repetitive detector value. When a camera failure alarm is received on the unit, it will store the alarm time and monitor the number of times the same alarm is triggered within an hour period. If the detector is triggered the number of times entered here, the unit will set the camera to ‘No Connection’. To disable this feature, leave the setting as ‘0’. Title Assign a recognisable name to the camera. This will be displayed in all references to the camera in the both the Configuration and Viewer menus. Type The settings will default to ‘Colour’. If Monochrome cameras are used, select ‘Mono’. Selecting ‘Mono’ will remove colour patterning. Select’ ‘IP’ for an IP Camera. If a particular channel is not in use or the camera has failed, select ‘No Conn’.

selected here. Fail Rep Select this option to generate a Failure report in the event of camera connection failure. Telemetry If a telemetry capable camera is connected, the appropriate control protocol should be selected from the accompanying drop down list, refer to ‘Appendix G’ for details of supported telemetry protocols. Default to preset If a telemetry camera has been assigned a preset position, select the chosen preset position here. Enter the time period (in minutes) of inactivity which will result in the camera moving to its preset position, refer to Viewer menus->Program Page for guidance on assigning camera presets. after X mins Refer to ‘Default to preset’. Note: The following settings will change depending on the type of camera connected. If a Local Analog Camera is selected Colour Select a colour value from -8 to +8 via the slidebar or enter a number directly into the accompanying textbox. Brightness Select a contrast value from -8 to +8 via the slidebar or enter a number directly into the accompanying textbox.

IP Type Select the type of NetVu Connected source the camera stream is originating from. Select from: ‘NetVu Server’ - i.e. DVIP Server, DVIP RT, SD, SD Excel, EcoSense. ‘NetVu Gen 2’ - i.e. DS2, BX2. NetVu Camera’ - i.e. the CamVu 2000 from Dedicated Micros. ‘NetVu ANPR’ - i.e. the HyperSense ANPR camera from Dedicated Micros. IP Mode Select the IP mode used to receive incoming IP data. Select from: Simple Stream - Received IP streams are non-compressed and are viewed as configured on the originating source. Recode Stream - When selected, the unit will recompress the incoming IP stream to the record profile settings established for this camera channel in the Profile Record menu (Record Settings->Profile Record). This feature is only accessable with 3rd party IP camera when the 3rd party IP camera license has been enabled.

the remote NetVu connected video server/camera to allow change Multimode profiles and perform additional activities such as VMD and Activity Detection as if the codec was an integral part of the DVR. If ‘Remote codec’ is selected, the loading on the unit’s internal codecs will be reduced. IMPORTANT: The Remote codec option is only applicable for NetVu Connected cameras. Note: Additional IP cameras ( further to existing local camera channels) are remote codec only. Therefore any NetVu connected cameras will be applied above local camera level. When ‘Simple Stream’ and ‘Recode Stream’ are selected via ‘IP Mode’, the following options will be available: IP Address Enter the URL address of the image source. Channel If the URL is a multichannel device (e.g. DV-IP NV1), this specifies which channel to use. Both types Live Trans (Red) Select to open the Network->Live Trans page View Profile (Green) Select to open the Record Settings->Profile Record page Basic (Yellow) Select to open the Serial Ports->Camera page. Lens Setup (Blue) Select to open the Camera Lens Configuration page Refresh (Purple) Refreshes the information on the current page.

This page allows different lens de-warping techniques to be applied to connected cameras. The NVR can de-warp Fish-eye and Depressive Fish-eye lenses to present a normal aspect image. Title Shows the allocated name of the video source. Lens Type Allows selection of fisheye, depressive fisheye and normal lens types. Pitch Allows the image to be rotated counterclockwise by ninety degrees. Ratio (H) Allows the horizontal ratio of a panamorphic lens to be set. Ratio (V) Allows the vertical ratio of a panamorphic lens to be set. Ratio x100 Allows the multiplier ratio of a panamorphic lens to be set. Cam Setup (Red) Select to open the Camera -> Setup page Cam Overview (Green) Select to open the Camera -> Overview page Refresh (Purple) Refreshes the information on the current page.

To edit the settings assigned to any of these cameras; Click on Local Camera Setup to edit the settings held in the SD Excel; Click on ‘Setup’ to open the Setup menu on the connected video source. CIP Settings (Red) Select to open the Closed IPTV->Settings page Unalloc (Green) Select to open the Camera->Unallocated Cams page Refresh (Purple) Refreshes the information on the current page.

The IP Streams menu allows the selection of High, Medium and Low resolution settings for video sources originating from a network based source i.e. IP Server. These streams are configured on the remote device. This feature is predominately intended for use with 3rd party IP camera streams (connected via the 3rd party IP camera unlock feature). Note: The IP Stream needs to be set to Simple Streaming on Camera->Setup. Note: There is only normal ‘non event’ recording for connected IP cameras. Channel Select a camera channel for review and adjustment. Only those cameras designated as ‘IP’ in the Camera Setup menu will be available (Configuration menu:Camera Settings->Camera Setup). Copy to all Select this option to apply current settings to all connected cameras. The following options can be configured for Set, Unset and Override record profiles when operating under Normal (non Event) conditions. Refer to Configuration Menu:Record Settings->Profile Record for information regarding record modes. Comp Select image compression format (MPEG or JPEG).

Low quality resolution settings. Note: To view a local third party IP camera ‘live’, IP recording should be set to MPEG. IP Camera (Yellow) Select to open the IP Camera Configuration menu. Schedule (Blue) Select to open the Schedule->Setup page Refresh (Purple) Refreshes the information on the current page. IP Camera Configuration Channel Select a camera channel for review and adjustment. Only those cameras designated as ‘IP’ in the Camera Setup menu will be available, (Camera->Setup). Mode Select the IP mode used to receive incoming IP data. Select from: Simple Stream - Received IP streams are non-compressed and are viewed as configured on the originating source.

the incoming IP stream to the record profile settings established for this camera channel in the Profile Record menu (Record Settings->Profile Record). This feature is only accessable with 3rd party IP camera when the 3rd party IP camera license has been enabled. Remote codec When selected, the unit will utilise the codec in the remote NetVu connected video server/camera as if it was directly connected inside the DVR. Thus the user can change Multimode profiles and perform additional activities such as VMD and Activity Detection as if the codec was an integral part of the DVR. If ‘Remote codec’ is selected, the loading on the unit’s internal codecs will be reduced. IMPORTANT: The Remote codec option is only applicable for NetVu Connected cameras. Note: Additional IP cameras ( further to existing local camera channels) are remote codec only. Therefore any NetVu connected cameras will be applied above local camera level. When ‘Simple Stream’ and ‘Recode Stream’ are selected via ‘IP Mode’, the following options will be available: URL Enter the URL address of the image source. Port If required, edit the port input data. This will default to 80 (HTTP). Chan If required, edit the channel input data. PPS Edit the PPS (Pictures per Second) recording settings. Recode Select to activate the recode option. When ‘Remote Codec’ is selected via ‘IP Mode’, the following options will be available: IP Address Enter the URL address of the image source. Channel If required, edit the channel input data. IP Camera (Yellow) Select to open the Camera->IP Stream Inputs page. Camera (Blue) Select to open the Serial->Camera page. Refresh (Purple) Refreshes the information on the current page.

Note: The setting ‘Restrict public access’ (Eth B) must be enabled on Closed IPTV->Settings if using Oracle IP domes in a Closed IPTV environment. Refresh (Purple) Refreshes the information on the current page.

If an IP source is plugged into a channel occupied by a BNC connection, the BNC will take priority and possess the channel, whilst the IP connection will be added to the un-allocated list, allowing it to be tied to an available channel through this configuration pages. Similarly, if a BNC connection is assigned to an occupied IP channel, the IP camera will be ‘bumped’ onto this list. Cameras can then be assigned to a free channel, or dismissed as no longer required. A dismissed camera can be added back into the un-allocated list by refreshing the connection (unplugging it from the switch, and plugging it back in again). Assign to: Displays all available unassigned cameras. Assign Assigns the associated IP stream to the selceted camera. Remove Entry Deletes the associated IP stream from the unallocated cameras list CIP Settings (Red) Select to open the Closed IPTV->Settings page Remove All (Green) Deletes all IP stream on the unallocated cameras list Refresh (Purple) Refreshes the information on the current page.

be configured for normal operation, on alarm, by schedule and for set holiday and weekend periods. Selected video data can be saved and protected. Refer to the individual menus for further details. The Default page allows the basic Recording settings to be edited. The Profile Record page allows the recording configuration to be based on specific priorities. The record rate and quality can be customised to respond appropriately to the alarms and time of day. A high degree of control and flexibility is possible using these options. The JPEG Trigger page allows configuration of the pre trigger feature (for cameras recording JPEG mode only). When enabled, the pre-trigger feature will buffer and store alarm recording prior to an event trigger The Holiday and Weekend page enables Set mode to be activated for individual dates i.e. public holidays or weekends. The Protect Video page allows previously recorded data to be protected and retained. If needed, all recording can be halted and saved video deleted. The AoE Setup page allows configuration of the units ATA over Ethernet (AoE) function. AoE is a network protocol designed for simple high-performance access of storage devices over Ethernet networks. Importantly the external storage device must be located on the same network as the unit.

MPEG4 for up to 120 days (dependent on model). Alternatively the unit can be configured for 2pps JPEG recording on each camera or for MultiMode operation (note that this will result in the record duration being determined by the time period the unit is in alarm). Days Recording Displays the record duration possible using the current configuration. Camera Settings Choose the rate of non alarm recording to be used from the range of preset recording profiles. Select from Advanced Rate MPEG4 6pps, Advanced Rate JPEG 3pps or MultiMode recording. Record Duration/Enhance Quality The recording duration can be limited to a set number of days; allowing the recording quality to be enhanced for a shorter storage period. Refresh (Purple) Refreshes the information on the current page.

feature offers the ability to set different recording rates, resolutions and compression formats across unset, set and override modes for each individual camera. By varying the quality, bit rate and file size of recorded images, the MultiMode function enables the recording capabilities of the unit to be greatly increased. The Profile record menu can be accessed in a Simple format or in Advanced mode. The Advanced mode offering greater opportunities to dynamically edit individual cameras recording capabilities. What is Turbo mode? Turbo mode allows video images from any analogue camera or 3rd Party IP recoded camera to be recorded and streamed at the maximum possible rate without the need to configure individual settings. Turbo mode must be set Globally and will result in MPEG record rates of 25pps@4CIF/2CIF/CIF/QCIF. Note: When Turbo Mode is selected, there will be only ONE configurable Record Profile across ALL cameras. The unit then matches the live transmission rate to the configured record rate. This enables a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’ Live Transmission profiles are available for configuration (Network Settings->Live Transmissions). Low and Medium transmission settings are configurable to allow video streaming over low bandwith IP connections and are limited to CIF for this purpose.

IMPORTANT: If Turbo mode is ‘Disabled’ and record settings have been configured which will exceed the unit’s Codec performance threshold. A warning message willbe displayed informing the user that the ‘Unit needs to be in turbo mode’. If the unit is currently in turbo mode and the currently configured record settings do not warrant turbo mode, a message will be displayed informing the user that ‘At the current settings the unit does not need to be in turbo mode. The codec’s performance thresholds are detailed in the About-Codec Loading menu (System Settings- >Status->About->Codec Loading) Days Recording Displays the record duration possible using the current configuration. Channel Enables selection of a specific camera for editing. Copy To End Select to copy the current profile record settings to all camera channels. Copy To Next Select to copy the current profile record settings to the next camera channel. Filter by Connected cameras are available to be sorted by the resolution, select the resolution of cameras to be displayed and configured. Turbo Mode Select to activate the Turbo mode function (see ‘What is Turbo mode?’ for a description of Turbo mode and its benefits). Unset/Set/Override Normal Shows the recording profile used by the camera if no Timer Functions are applied and the camera is operating under Normal (non Event) conditions. Refer to the ‘Schedules’ section for further details.

Alarm or Event. Note that Set and Override schedules will be used only when Timed Schedules are applied. Refer to the ‘Schedules’ section for further details. Note: When Turbo mode is selected, there will be only ONE configurable Record Profile across ALL cameras. The unit then matches the live transmission rate to the configured record rate. This enables a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’ Live Transmission profiles are available for configuration (Network Settings->Live Transmissions). Low and Medium transmission settings are configurable to allow video streaming over low bandwith IP connections and are limited to CIF for this purpose. Note: Unset, Set and Override modes can be given more recognisable titles i.e. Day, Night, Weekend via the Schedule menu (Record Settings->Schedule). Comp Select image compression format (MPEG, JPEG). PPS The accompanying dropdown list allows the number of frames captured per second to be set. The pictures per second (pps) option allows either 6, 5, 2, 1, 0.5, 0.25 or 0.1 pps to be recorded. Pictures can also be recorded at ‘Real Time’ speed, ‘3/4 Real Time’ or ‘1/2 Real Time’. To disable record, choose the ‘No Record’ option. Select ‘User Defined’ to use settings established in the Advanced Profile Record menu. Quality The accompanying dropdown list allows the quality of recorded images to be set. Select from Maximum, Very High, High, Medium, or Low. Select User Defined to use settings established in the Advance Profile Record menu. Note: The higher the Quality setting, the greater the storage space used. Codec Load (Red) Select to open the System->Status->About->Codec Loading page Refresh (Purple) Refreshes the information on the current page.

Note: When Advanced Record settings have been changed, it is not possible access the Simple Record menu until the newly configured Advanced Record settings have been applied. To do this, open the Record menu and select the ‘Save’ option. It will then be possible to return to the Profile Record menu and access Simple Record. IMPORTANT: If Turbo mode is ‘Disabled’ and record settings have been configured which will exceed the unit’s Codec performance threshold. A warning message willbe displayed informing the user that the ‘Unit needs to be in turbo mode’. If the unit is currently in turbo mode and the currently configured record settings do not warrant turbo mode, a message will be displayed informing the user that ‘At the current settings the unit does not need to be in turbo mode. The codec’s performance thresholds are detailed in the About-Codec Loading menu (System Settings- >Status->About->Codec Loading) Days Recording Displays the record duration possible using the current configuration. Channel Enables selection of a specific camera for editing. Copy To End Select to copy the current profile record settings to all camera channels. Copy To Next Select to copy the current profile record settings to the next camera channel. Filter by Connected cameras are available to be sorted by the resolution, select the resolution of cameras to be displayed and configured. Turbo Mode Select to activate the Turbo mode function (see ‘What is Turbo mode?’ for a description of Turbo mode and its benefits).

are applied and the camera is operating under Normal (non Event) conditions. Refer to ‘Schedule’ for further information. Unset/Set/Override Event Shows the recording quality that will be used by the camera during an Alarm or Event. Note that Set and Override schedules will be used only when Timed Schedules are applied. Refer to ‘Schedule’ for further information. Note: When Turbo mode is selected, there will be only ONE configurable Record Profile across ALL cameras. The unit then matches the live transmission rate to the configured record rate. This enables a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’ Live Transmission profiles are available for configuration (Network Settings->Live Transmissions). Low and Medium transmission settings are configurable to allow video streaming over low bandwith IP connections and are limited to CIF for this purpose. Note: Unset, Set and Override modes can be given more recognisable titles i.e. Day, Night, Weekend via the Schedule menu (Record Settings->Schedule). Comp Select image compression format (MPEG, JPEG). Res Select image resolution format (QCIF, CIF, 2CIF or 4CIF). Rate_kbps If MPEG4 is selected, the figure entered here will be the bit rate allocated. A higher bit rate will provide better quality. MPEG bit rates can be entered within the range of 45-2500K bits/second. IMPORTANT: The bit rate allocation will be limited to a maximum rate of 2048 per camera. Size If JPEG is selected, the figure entered here will be the size of the JPEG transmitted (in Kbytes). JPEG file sizes can be configured within the range of 5-45Kbytes. PPS Select the number of pictures recorded per second. GOP If using MPEG4 recording, select the number of images recorded within a GOP (Group of Pictures). A GOP consists of an I-Frame (keyframe) and following P frames. Note: The GOP is also the rewind interval and stop interval for MPEG recording playback. Note: An MPEG I-frame is considerably larger than a P-frame. Therefore the lower the GOP ratio, the higher the disk space required to store recorded images. Codec Load (Red) Select to open the System->Status->About->Codec Loading page Refresh (Purple) Refreshes the information on the current page.

This menu enables configuration of the pre trigger feature (for cameras recording JPEG mode only). When enabled, the pre-trigger feature will buffer and store alarm recording prior to an event trigger. Channel Only those camera channels set to record in JPEG mode will be available for configuration. Pre-Trigger (JPEG) Enabling the Pre-Trigger feature will buffer and store alarm recording prior to an event trigger (in JPEG format). It will use the maximum available memory dependent on other cameras requirements of the buffer space. Select ‘Enable’ to activate. Note: It is recommended that the Pre-Alarm option in the ‘Alarm Settings-Zone Input’ menu be set to the same value as the Pre-Trigger setting. This will ensure successful playback of high quality Pre-Trigger images. High quality pre-trigger images will only playback properly if review (playback) starts prior to the pre-trigger initiation. Pre-Trigger Duration (secs) The Pre-Trigger Duration is the maximum possible time that data will be stored prior to an event trigger. Refresh (Purple) Refreshes the information on the current page

saved data can also be unprotected. Enter a start and end time and select ‘Reload List’ . All saved video files from the chosen time period will be shown in the upper textbox. These recorded ‘PAR’ files can then be selected and protected via their accompanying checkboxes and the Protect option. Selected video files can also be unprotected via the Unprotect option. The lower textbox provides a status report detailing which video files have been protected/unprotected. Start Date Enter a start date to protect video. Start Time Enter a start time to protect video. End Date Enter an end date to protect video. End Time Enter an end time to protect video. Protect Length (days) Enter the number of days that selected files will be protected for. Protect Select this option to protect recorded video for the selected time period(s). Unprotect Select this option to unprotect recorded video selected from the list. Reload List This will refresh the video list according to the selections made in the Start Time/Date and End Time/Date dialog boxes. Select None This de-selects all the available video files. Select All This selects all the available video files.

This dialog box allows a search to be made within the protected video list starting from a specific Time and Date. List To Date/Time This dialog box allows a search within the protected video list to conclude at a specific Time and Date. Unprot all (Red) Select to unprotect all recorded video from the list Protect (Green) Select to protect recorded video for the chosen time period Unprotect (Yellow) Select to unprotect recorded video for the chosen time period Refresh (Purple) Refreshes the information on the current page

designed for simple high-performance access of storage devices over Ethernet networks. Importantly the external storage device must be located on the same network as the unit. AoE does not rely on network layers such as IP and TCP, making it non routable i.e. routers cannot be used to forward a packet across disparate networks. AoE packets can only travel within a single local Ethernet storage area network (adds a physical layer of security to the information). The stored video can only be accessed by plugging directly into an ethernet socket in the same LAN as the host. This means AoE cannot be accessed over the Internet or other IP networks, but makes AoE more lightweight (with less load on the host), easier to implement, provides a layer of inherent security, and offers higher performance. Logical Devices Connected AOE Devices - Any devices in this panel are being used by the unit to store data. They can be freed by clicking on the Release button. Physical Devices Available AOE Devices - Any devices in this panel are available on the network. They can be added to the storage capability of this unit by ‘claiming’ the storage. Unavailable storage is listed as Owned. Claimed storage capacity can be ‘released’ in the top panel. Refresh (Purple) Refreshes the current page.

to automatically be put into set/unset mode at specific times on specific days. This can help reduce unnecessary alarm triggers. The mode will be set by the DVR that the camera is connected to. When the unit is in Set or Unset mode, combine with different recording qualities and rates under normal and alarm conditions for a high degree of control in a range of situations. The Setup page allows configuration of the schedule including naming the modes of operation and controlling when the unit changes between modes. The Holiday & Weekend menu allows the unit to be automatically switched to Override mode for individual days i.e. public holidays or during a weekend (or any defined period).

to automatically be put into set/unset mode at specific times on specific days. This can help reduce unnecessary alarm triggers. The mode will be set by the DVR that the camera is connected to. When the unit is in Set or Unset mode, combine with different recording qualities and rates under normal and alarm conditions for a high degree of control in a range of situations. The Setup page allows configuration of the schedule including naming the modes of operation and controlling when the unit changes between modes. Mode/Title Enables a name to be entered for Unset, Set and Override mode. Current Mode Shows the current timer mode according to the names entered in the Mode/Title text boxes. Day Time Enter the time (using the 24hr clock) when Unset mode will begin. Night Time Enter the time (using the 24hr clock) when Set mode will begin Refresh (Purple) Refreshes the current page