Decware CSP2 Owner's Manual
Text of Decware CSP2 Owner's Manual
Decware High Fidelity Engineering Co. 1202 N.E. Adams Street Peoria , IL 61603 (309) 671 2428
STEREO PRE AMPLIFIER
CSP2
OWNERS MANUAL
lightning flash with arrowhead, within
an equilateral triangle, is intended to
alert the user to the presence of unin-
stalled “dangerous voltage” within the
product’s enclosure that may be of risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in the
literature accompanying the appli-
ance.
AVIS RISQU�
By purchasing the Zen Triode CSP pre-
amplifier you have illustrated a desire to rise
past the normal hi-end hype and own a truly
exceptional piece. It is a product based on
the old school way of doing things when it
was fashionable to push quality to an art
form. Your amplifier was hand-built by the
very best artisans who have perfected the
craft through the experience of building well
over one thousand amplifiers, each one at a
time.
Please
Introduction and Performance Features
Important Information
1
Caution: To prevent electrical shock
make sure that the AC POWER CORD IS
NOT CONNECTED TO THE CSP2 when
inserting or removing Vacuum Tubes,
as there are hazardous voltages pre-
sent at the pins of the Tube Sockets.
2
When Vacuum Tubes are installed or re-
moved make sure to seat them properly in
the tube sockets. A properly installed Vac-
uum tube should seat all the way down
making the tube
The CSP2 is designed with an adjustable line
output level that will set the voltage for both
the stereo and mono output jacks. There are
two thumb pots located just off the rear corners
of the power transformer that are used to ad-
just the output level for each channel indepen-
dently.
These pots have been pre-adjusted at the fac-
tory and marked so that you can easily restore
your CSP2 to the factory calibration.
Factory calibration of t
INPUT TUBE INFORMATION
The CSP2 is designed to use your choice of
three different input (or signal) tubes.
6N1P
6DJ8 (a popular low noise tube both available
in current production by numerous manufactur-
ers and in N.O.S.)
6922 (a popular variant of the 6DJ8 also avail-
able by a wide variety of manufacturers and in
N.O.S.)
RECTIFIER TUBE INFORMATION
The CSP2 is designed around the 5Y3GT recti-
fier tube. It is however, compatible with the
following al
You now own one of the best SET headphone/
preamplifiers in the world! It has many unique
features that set it apart from the rest. It’s
point-to-point construction, lack of circuit
boards, and direct coupled signal path means
nothing sold today is more transparent or hon-
est. Of course almost everything sold today
claims to be sonically transparent and absolutely
accurate, but when compared side by side to the
Zen Triode CSP2 it usual
The CSP2 amplifier is 7.25 inches wide by 14.75
inches deep with a height of 6.5 inches.
PLACEMENT
With the jacks vertically mounted at the rear
of the amplifier, it is possible to push the amp
all the way to the rear of a shelf. However,
we recommend keeping a 2 inch spacing
on all sides and at least 6 to 10 inches of
space above the amplifier. Avoid closed
cabinets. The better the ventilation around
your amplifier the cooler it will run.