Clearaudio Concept MC Operation & User’s Manual

GmbH Spardorfer Str. 150 ● D-91054 Erlangen ● Tel. +49(0)1805/059595 ● FAX +49(0)09131/51683 www.clearaudio.de●[email protected]●copyright clearaudio 2011 Made in Germany Version1_Musical Surroundings_E [ ] Concept MC User manual ...

Dear clearaudio customer, Thank you for purchasing the clearaudio Concept – turntable. The clearaudio Concept - turntable sets a new standard in turntable manufacturing. Precision German engineering combined with the latest technology and timeless design signal a ...

Contents Page 1. Packing overview 3 2. Parts list 3 3. Set up 4 4. Cartridge mounting 6 5. Service 8 6. Technical data 9 Warranty information 10 ...

1. Packing overview clearaudio has developed a special and secure packing for your Concept (MC) - turntable that ensures safe transportation. Please keep this original packing, in case you need to ship the turntable. 2. Part list 1. Accessories: Level gauge, Smart S ...

3. Set up The set up of the Concept (MC)- turntable is easy as the turntable and tonearm are pre- assembled. If you chose the model with included cartridge, it has been mounted and all parameters have been already adjusted and tested at the clearaudio factory. If no ...

6.)The following adjustment is very important: Place the clearaudio level gauge on the platter as in picture 5. Should the bubble of the level-gauge not be in the center of the black circle, please check that that the surface under the turntable is level. You can ac ...

4. Cartridge mounting Please pay attention during every step to avoid damaging the cartridge! Please refer to the cartridge manufacturer’s manual during installation and follow the appropriate instructions. 1.) Physically mount the cartridge using mounting hardwar ...

tighten the screw. Please recheck the tracking force after making any adjustments to the arm height. 5.) Azimuth Next, use the cueing mechanism to lower the cartridge and check that the upper edge of the cartridge is parallel to the record surface as viewed from the ...

clockwise to increase, counter-clockwise to decrease anti-skate. Do not turn more than 1 complete rotation from reference point to avoid damage to tonearm bearing (not covered by warranty). The general set-up is now finished. ...

5. Service If any service or repair on a clearaudio product is necessary, service for should be done by authorized personal only. Please contact your dealer first then the US distributor: Musical Surroundings at 510 547-5006 or [email protected] In case a ...