CMA Dishmachines UC50E Quick Setup Instructions

Text of CMA Dishmachines UC50E Quick Setup Instructions

Connect lines 1 and 2 to electrical block located

inside front panel. 4-2013 3 STEP Connect dishmachine to hot water source, minimum temperature 120F, better results at 140F. 4 STEP UC50e Quick Setup Instructions CLEAR GREEN TO GAIN ACCESS TO THE UC50e COMPONENTS, REMOVE SCREW AND SLIDE REAR PANEL UP. LEVELING LEGS 3 ELECTRICAL INLET 1 1 STEP Connect the drain hose to wall or floor drain. The floor drain must have a 1 inch air gap between drain hos

Push button to change time cycle. Push to the "IN"

position to run for 120 seconds and the "OUT" position for 180 second run. START 8 STEP At the end of the day, push the power button (STEP 5) to turn power off. When draining the dishmachine, remove overflow tube located inside the wash tank. 9 STEP With the overflow tube removed, push drain button to empty dishmachine. Reinstall overflow tube when drain cycle is complete. UC50e FRONT VIEW 5 ST

CMA Dishmachines Dishwasher Owners Instructions: