Comprehensive CHE-HDBT300 Operation Manual

is believed to be accurate. Comprehensive assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Comprehensive assumes no responsibility for any inaccuracies that may be contained in this document. Comprehensive also m ...

operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or ...

2. Applications .......................................... 1 3. Package Contents ................................ 1 4. System Requirements ........................... 1 5. Features ................................................. 2 6.1 Transmitter Front and Rear Panels..3 6.2 Receiver Fr ...

send uncompressed audio/video and IP data over a single run of CAT5e/6/7 cable at a distance up to 330 Feet. It has the added benefit of control through the built-in RS-232 and IR ports and a bi- directional LAN serving connection. The Receiver (PD) can be powered by the PoE 48V ...

• Supports CEC bypass • Simultaneous transmission of uncompressed data over a single 328ft CAT5e/6/7 cable • 5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232) • Supports resolution up to 4K2K@50/60 & YUV_420 and 21:9 • Supports standard 48V from Transmitter (PSE) to Receiv ...

6.1 Transmitter Front and Rear Panels DC 48V: Plug the 48V DC power supply into the unit and connect the adaptor to an AC outlet. IR1 BLASTER: Connect to the supplied IR Blaster cable for IR signal transmission. Place the IR Blaster in direct line-of-sight of the equipment to be controlled. IR2 EXTENDER: Connect to the sup ...

IR2 BLASTER: Connect to the supplied IR Blaster cable for IR signal transmission. Place the IR Blaster in direct line-of-sight of the equipment to be controlled. IR1 EXTENDER: Connect to the supplied IR Extender cables for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR Exte ...

IR Blaster IR Extender Power IR Blaster Signal NC IR Signal Power Grounding 6.4. D-Sub 9 Pin Definitions Pin Define TX / RX 1 N/C 2 TxD / RxD 3 RxD / TxD 4 N/C 5 GND 6 N/C 7 N/C 8 N/C 9 N/C ...