Conceptronic CH3MNAS Operation & User’s Manual

Conceptronic 2-Bay Media Network Hard disk. This User Manual gives you a step-by-step explanation of how to install and use the Conceptronic 2-Bay Media Network Hard disk. When you need more information or support for your product, we advise you to visit our Service & Support ...

Front view Back view Nr Description State Explanation 1. Power button Turn on or off the CH3MNAS. Press once to power on. Press and hold the button for 5 seconds to power off. 2. < Reserved > < No function > 3. Power LED On The CH3MNAS is turned on. 4. HDD1/2 LED Off The CH3MNAS is turned off, or there is no HDD in the slo ...

3.1 HDD installation A. Slide the lock switch (located on the bottom of the front panel) to the right position to unlock the front panel. B. Slide the front panel up and pull it off the CH3MNAS to access the HDD bays. C. Insert 1 or 2 SATA 3.5” hard disk drives into the available drive bays until they are firmly connected ...

HDD screws to the CH3MNAS. Note: Remember to fix the hard disk(s) on both sides of the CH3MNAS. F. Slide back the 2 side panels. G. Put the front panel back on the CH3MNAS and slide it down to fix it. H. Slide the lock switch (located on the bottom of the front panel) to the left position to lock the front pane ...

The CH3MNAS can be accessed and managed through the Grab’n’Go Easy Finder, which can be installed on your Windows computer with the included CD-ROM. 4.1 Installing the Grab’n’Go Easy Finder A. Insert the Product CD-ROM in your CD-ROM drive. The Autorun Menu should appear automatically. If the Menu does not appea ...

When you start the Grab’n’Go Easy Finder, the main window of the utility is shown on your screen: Note: When you are using a firewall on your computer (like the standard firewall in Windows XP and Windows Vista), the firewall will show a message to allow or deny the Grab’n’Go Easy Finder to access you ...

• If “DCHP Client” is set to “Enable”, the CH3MNAS will obtain an IP address from a DHCP server in your network automatically. • If “DHCP Client” is set to “Disable”, you can enter the IP Address, Netmask and Gateway manually. W ...

Some basic settings of the CH3MNAS can be configured through the Grab’n’Go Easy Finder, as described in chapter 5 of this manual. The complete configuration of the CH3MNAS can be done through the web-based configuration of the CH3MNAS. 5.1 Accessing the CH3MNAS web-based configuration You can enter the web-based confi ...

C. Select the file system for your HDD configuration. You can choose between: • EXT2 : Allows the best performance on the CH3MNAS • EXT3 : Allows the best stability of the CH3MNAS Click “Next” to proceed. Depending on the chosen HDD configuration at step A, the steps below are valid for your conf ...

[ CH3MNAS - Restarting ] When the restart of the CH3MNAS is complete, the login page will be shown, allowing you to login and continue the configuration of the CH3MNAS. When you login to the web-based configuration of ...