Cutter SCX264 Operating Instructions Manual

Lea las instrucciones antes de utilizar la máquina MODELS: SCX264 SCXC264 BSCSCX264 10052380 10052430 10052860 SCX324 SCXC324 10052390 10052440 Operating Instructions (ENG) Instrucciones de funcionamiento (SPA) 86039080 - BN 01/20/12 PRV NO. 98964 WALK BEHIND SCRUBBER IPX4 ...

CUTTER 24V 86039080 05/04/11 2 For the name and address of your dealer contact: Windsor Industries YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ Phone Number: _________________________________________________________________________________________ OVERVIEW The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brush ...

CUTTER 24V 86039080 04/17/07 3 Machine Data Log/Overview.........................2 Table of Contents..........................................3 HOW TO USE THIS MANUAL How to use this Manual.................................1-1 SAFETY Important Safety Instructions ........................2-1 Hazard Intensity Level. .................................2-2 Safety Label Location. ..................................2-3 OPERATIONS Technical Specifications. ..............................3-1 How the Machine Works...............................3-3 Components..................................................3-4 Controls.......................... ...

CUTTER 24V 86039080 04/17/07 1-1 This manual contains the following sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model and serial number of your machine i ...

2-1 IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center. Do not operate the machine with any openings blocked. Keep openings free ...

CUTTER 24V 86039080 04/17/07 2-2 The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage. FOR SAFETY: To Identify actions which must be followed for safe operation of equipment. Report machi ...

CUTTER 24V 86039080 04/17/07 2-3 NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. BATTERY CAUTION 86252520 PRV NO. 80885 SAFETY DECAL 86252530 PRV NO. 81494 CIRCUIT BREAKER DECAL 86243530 PRV NO. 500565 2% GRADE WARNING SEE MANUAL ...

3-1 ITEM DIMENSION/CAPACITY Nominal power 1450 W Rated Voltage 24VDC Rated Amperage 60 Amps Batteries 4 X 6 Volt 250-305-335AH @ 20 hr rate Scrub Brush Motors 2 X .75 hp (0.56 kW) Vacuum Motor .75 hp (0.56 Kw) Propelling Motor .3 hp (0.22 Kw) Mass (GVW) 915 lbs. (415 kg) with 335 AH Weight empty without batteries 346 lbs. (157 kg) Solution Control Gravity feed, fully variable with automatic shut-off in neutral Solution tank capacity 23 gal. (87 l) Recovery tank capacity 25 gal. (95 l) Scrub brush diameter for 26 in. (66 cm) scrub head 13 in (33.0 cm) Scrub brush diameter for 32 in. (81 cm) scr ...

3-2 ITEM MEASURE Height 45 in. (114 cm) Length with 26 in. (66 cm) scrub head 64 in. (163 cm) Length with 32 in. (81 cm) scrub head 66 in. (167 cm) Width without squeegee and scrub head 24 in. (61 cm) Width of squeegee for 26 in. (66 cm) scrub head 35 in. (89 cm) Width of squeegee for 32 in. (81 cm) scrub head 39 in. (99 cm) Width of scrub path for 26 in. (66 cm) scrub head 26 in. (66 cm) Width of scrub path for 32 in. (81 cm) scrub head 32 in. (81 cm) Height Width Length SPECIAL NOTES: The sound pressure level at the operator’s ear was measured to be 72 dBA. This was a nearfield, broad-band ...

CUTTER 24V 86039080 04/17/07 3-3 The Saber Cutter is a battery powered, self- propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes, and then vacuums the soiled water back into the recovery tank. The machine's primary systems are the solution system, scrub system, recovery system, and directional control system. The function of the solution system is to store cleaning solution and deliver it to the scrub system. The solution system consists of the solution tank, strainer, valve and controls. The solution tank stores cleaning solu ...

3-4 1. Control Panel 2. Front Cover 3. Recovery Tank 4. Recovery Tank Drain Hose 5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15. Accessory Pump Port (Optional) 12 7 2 5 6 3 1 15 13 4 10 8 11 9 14 ...

3-6 1. Key Switch 2. Emergency Shut Off Switch (Optional) 3. Speed Control Knob 4. Propel Control Lever 5. Reverse Button 6. Brush Switch 7. Actuator Switch 8. Solution Control Knob 9. Vacuum Switch 10. Squeegee Lift Lever 11. Squeegee Pitch Adjustment Knob 12. Squeegee Deflection Adjustment Knobs 13. Battery Charge Level Indicator 14. Parking Brake (Optional) 15. Hour Meter (Optional) 16. Brush Pressure Indicator 1. KEY SWITCH Controls the power for machine functions. To turn machine on, rotate key clockwise. To turn machine off, rotate key counterclockwise. FOR SAFETY: Always remove the key when machine is un ...

3-7 7. ACTUATOR SWITCH Adjusts the amount of brush pressure to the floor by raising or lowering the scrub deck. To increase brush pressure, press the bottom of the switch. To decrease brush pressure or rise the scrub deck, press the top of the switch. 8. SOLUTION CONTROL KNOB Controls solution flow to scrub deck. To increase flow, rotate knob clockwise. To decrease flow, rotate knob counterclockwise. If the brush motors are turned off or the propel control levers are in neutral, the flow is automatically interrupted until the motors are turned on again. This feature prevents unintentional draining of the solu ...

3-8 13. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bar illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also indicate a full charge if the batteries are disconnected, then reconnected. After a few minutes of operation the meter will give the correct ...

3-9 PRE-RUN MACHINE INSPECTION Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps. NOTE: See maintenance section for pre-run machine inspection checklist items. STARTING MACHINE NOTE: Perform pre-run machine check before operating machine. FOR SAFETY: Before starting machine, make sure that all safety devices are in place and operating properly. 1. Turn the machine power on. 2. Release the parking brake, if your machine is equipped with this option. 3. Engage the direction propel ...

3-10 NORMAL SCRUBBING Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest possible without turning, stopping, or raising and lowering scrub deck/squeegee. NOTE: In order to achieve the best possible results, the area which is to be cleaned should be swept before scrubbing. Large debris, strings & wire must be removed to prevent being caught in brushes or squeegee. TO BEGIN SCRUBBING When operating the machine around people, pay close attention for unexpected movement. Use extra caution a ...

3-11 DOUBLE SCRUB For floors which are heavily soiled or have thick accumulations of floor finish may not clean sufficiently with one pass. In these cases it will be necessary to double scrub. To double scrub, make the first pass over the surface being cleaned with the squeegee up, vacuum off, the solution on, Aqua-Mizer removed and brushes down. This allows the solution to stay in contact with the soil while loosening the surface accumulation with the brushes. Allow time for the first application to stay in contact with the floor. Length of time between the first and second pass depends on amount of ...

4-1 SERVICE SCHEDULE MAINTENANCE DAILY WEEKLY MONTHLY 100 HRS 200 HRS Check batteries after charging; add water if necessary * Check pad wear to prevent buildup of chemicals * Check linkages and connectors for wear and damage * Check hoses for wear, blockages, or damage * Clean squeegee; check for adjustment; inspect for wear * Check handles, switches, knobs, domes, and gaskets for damage * Clean out recovery tank * Clean out solution tank; remove and clean screen * Clean outside of all tanks; check for damage * Run vac motor for at least one minute to allow motor to dry * Store with dome off tank to allow ...

4-2 1. Batteries 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11. Vacuum Motor 12. Actuator Scrub Brush 9 8 7 6 5 3 4 2 1 11 10 12 ...