Cypress DVT-17 Operation Manual

Text of the manual

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress al

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:  Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.  To prevent fire

Table of Contents

1. Introduction...................................................................................1 2. Applications..................................................................................1 3. Package Contents.......................................................................1 4. Features........................................

The 4 by 1 Optical Audio Switcher is a device with four optical inputs and one

optical output. This device allows users with multiple optical sources to connect for one output display while all signals can bypass without delay. The device has a built in last memory function and IR remote control which provides a more users friendly operatin

4 x Optical

Sample Frequency Up to 192 kHz Output Port 1 x Optical Audio Format PCM2, Dolby 5.1 & DTS 5.1 pass through Power Supply 5V / 1A DC ( US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ± 8kV (air-gap discharge) ± 6kV (contact discharge) Dimensions(mm) 100 (W) x 70 (D) x 20(H) Weight(g) 90 Chass

6. Operation Controls and Functions

6.1 Top Panel 1 ① Input 1~4: The LED will illuminate in blue when selected the source. 6.2 Left Panel 1 1 Optical In: These slots are to connect with input source equipments such as DVD/Blue-Ray player for audio input signal sending.

6.3 Right Panel

1 2 3 4 ① Power: Press this button to turn on the device or to set it to standby mode. The blue LED on the top panel will illuminate when the device is turn on. ② Input: Press this button to select the input port from 1~4. The blue LED on the top panel will illuminate according to the selection. ③ Optical OUT: This slot is w

7. Remote Control

① Power button: Press to switch On the device,press it again to set the device in standby mode. ② 1~4: Press the desire input button to select the input source. ① ②

7. Connection and Installation

DVD DVD Blu-ray Blu-ray Amplifier Active Speaker or 30˚ 30˚ 3 M 7 M 3 M

Other Switch Manuals