D-Link DI-704P Quick Installation Manual

1. If you purchased this router to share your high-speed Internet connection with other computers, you must have an Ethernet-based Cable/DSL modem with an established Internet account from an Internet Service Provider (ISP). 2. It’s best to use the same computer that is connected to your modem for configuring the DI-704P router. The DI-704 ...

Router To Your Network A. First, connect the power adapter to the receptor at the side panel of the DI-704P and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of an Ethernet cable to the WAN port on the back panel of th ...

DI-704P Broadband Router Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on the back panel of the DI-704P. When you have completed the steps in this Quick Installation Guide, your connected network should look similar t ...

The logon pop-up screen will appear. Once you have logged in, the Home screen will appear. Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. Type “admin” for the username and leave the password field blank. Click OK DI-704P Click Run Wizard ...

screens. Set password. You have the option to establish a new admin password for the DI-704P Click Next Click Next ...

Select the type of Internet connection for your router. If you selected Dynamic IP Address, this screen will appear: If you are unsure of which setting to select, please contact your Internet Service Provider. What is a MAC address? Each network adapter has a discrete Media Access Control (MAC) address. Note that some computers a ...

Static IP Address, and this option is selected, then this screen will appear: If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet) and this option is selected, then this screen will appear: Enter in the username and password provided to you by your ISP. Do not use the numbers displayed in these fields. They are only shown as ...

Test Your Internet Connection Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web- management interface; or to the manual located on the CD-ROM. Clic ...

the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DI-704P Broadband Router. For Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection a ...

Go to the Apple Menu and Select System Preferences. The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear. Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now ...