D-Link DNS-312H Quick Instruction Manual
Text of the manual
1. If you purchased this storage to share your file or media with other computers, you
must have Ethernet cable or Internet environment
2. It's best to use the same computer that for configuring the DNS-312H storage. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-ROM
for setting each network adapter to automatically obtain
Connect the DNS-312H NAS To
Your Network
A、First, connect the power adapter to the receptor at the back panel of the DNS-
312H and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn ON to indicate proper operation.
B、Insert an Ethernet cable to LAN port on the back of the DNS-312H and an
available Ethe
Light off: HD
no read/write
Local Network LED
Solid Light: While
connected to LAN port
Blinking: While
transferring data
Light off: Disconnected
USB
Solid Light: USB
Flash/HDD connected
Blinking: Receiving data
Light off: No USB
Flash/HDD connected
The Descriptions of LEDs
Power LED
Solid Light: Power on
Light off : Power off
H
When you have completed the steps in this Quick Installation Guide,
your connected network should look similar to this:
Using The Setup Wizard
Enter the default IP
After DNS-312H installation, for each PC, the following items may need to be
configured:
Enter the default IP
After connecting the device running D-Link DNS-312H to the network and powering it
o
Enter the default user name
In the authentication dialogue please enter the
default user “admin,” leave the password field
blank, and click “OK.”
Open your Web
browser and Type
“192.168.0.101” into the
URL address box. Then
press the Enter or
Return key.
Click OK
Type “admin” for the
username and leave the
password field blank.
The Setup Wizard (continued)
The setup wizard will help you configure the basic settings of the system in
a few steps. The settings will not take effect until you click the [Finish] button in the
last page.
Click the “Run Wizard” button to start.
Enter system information
1. Enter the server name in the “Server name:” filed so you can quickly access
The Setup Wizard (continued)
Enter networking information
Since this is the first time you configure the system, the following networking settings
will be adopted by default:
IP: 192.168.0.101
Subnet mask: 255.255.255.0
Default gateway:192.168.0.1
DNS server: empty
You can modify the settings to fit your need.
If a DHCP server is available in the same netw
The Setup Wizard (continued)
Setup network file protocol
1. Determine the Workgroup and WINS server IP here. The Workgroup should be 0
to 14 English bytes.
2. Choose the Mac OS zone. A zone is a logical grouping of devices in an AppleTalk
network. Select the zone from the dropping down menu.
3. Choose the appropriate encoding from the “code page” drop-