Echo SRM-225 Operator's Manual

Operator’s Manual Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment. x7722271404 / x772000164 SRM-225 GRASS TRIMMER / BRUSH CUTTER Burn Hazard The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur. The engine exhaust from this product contains chemicals known to the State of Califor ...

SRM-225 2 X7722279402 © 2/2016 ECHO Inc. Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serious injury. TABLE OF CONTENTS Table of Contents .............................................................................................. 2 Introduction ....................................................................................................... 4 The Operator’s Manual ................. ...

SRM-225 TABLE OF CONTENTS Maintenance.................................................................................................... 28 Skill Levels ............................................................................................... 28 Maintenance Intervals .............................................................................. 29 Air Filter.................................................................................................... 30 Fuel Filter ................................................................................................. 30 Spark Plug................................ ...

INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product. The Safety Manual Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to insu ...

SRM-225 SAFETY Echo Consumer Product Support If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:00 am to 5:00 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit. Product Registration To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at www.echo-usa.com or by filling out the product registration sheet included in this manual. Registering your product confirms ...

The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided. The enclosed message provides information necessary for the protection of the unit. Note: This enclosed message provides tips for use, care and maintenance of the unit. CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury. International Symbols Symbol Description Symbol Description Warning, See Operator’s Manual Carburetor Adjustment - High S ...

SRM-225 SAFETY AVOID KICKOUT. Keep Bystanders At Least 15 meters (50 feet) Away. Beware Thrown Objects Wear Eye Protection DO NOT Allow Flames or Sparks Near Fuel Ignition ON / OFF DO NOT Smoke Near Fuel Primer Bulb Choke Control “RUN” Position (Choke Open) Choke Control “COLD START” Position (Choke Closed) Keep Feet Away From Blade Rotating Cutting Attachment Keep Bystanders and Helpers Away 15 m (50 ft.). Thrown Objects Direction of Blade Symbol Description Symbol Description ...

Personal Condition and Safety Equipment Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. Physical Condition Your judgment and physical dexterity may not be good: • If you are tired or sick. • If you are taking medication. • If you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection ◆Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate the unit. ◆For additional ...

SRM-225 SAFETY • Pants should have long legs, shirts should have long sleeves. • DO NOT WEAR SHORTS. • DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth. • Keep clothing buttoned or zipped, and keep shirt tails tucked in. Wear sturdy work shoes with nonskid rubber soles: • DO NOT WEAR OPEN TOED SHOES. • DO NOT OPERATE UNIT BAREFOOTED. Keep long hair away from engine and air intake. Retain hair with cap or net. Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work ...

• Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists. • Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking. • Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required. • If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. Repetitive Stress Injuries (RSI) It is believed that overusing ...

SRM-225 SAFETY All over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result. Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area • Spectators and fellow workers must be wa ...

Equipment Use only ECHO attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. • Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. • Inspect shield for damage and ensure that the cut-off knife is securely in place. Replace if either is damaged or missing. • Check that the cutting attachment i ...

SRM-225 EMISSION CONTROL EMISSION CONTROL (EXHAUST & EVAPORATIVE) CARB And EPA Emissions Control Information The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “B”, “C”, “K”, or “T”, the emission control system is EM and TWC (3-way catalyst). The fuel tank/ fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions for California models are only applicable to fuel tanks. An Emission Control Label is located on the engine. (This is an EXA ...

DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 11 12 13 14 15 16 17 18 19 1 2 5 6 8 9 10 4 3 7 ...

SRM-225 DESCRIPTION 1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter. 2. THROTTLE HANDLE - FOR RIGHT HAND - Contains Stop Switch, Throttle Lockout, and Throttle Trigger. 3. THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. 4. STOP SWITCH - “SLIDE SWITCH” mounted on top of the Throttle Handle. Move switch FORWARD to RUN, BACK to STOP. 5. SUPPORT HANDLE - FOR LEFT HAND - The support handle is factory assembled to the Drive Shaft assembly but must be re-positio ...

14. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER WITH CATALYST -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris. 15. FUEL TANK - Contains fuel and fuel filter. 16. FUEL TANK CAP - Covers and seals fuel tank opening. 17. CHOKE - The choke control is located at the rear of the air cleaner housing. Move choke lever to COLD START ( ) to close choke for cold start. Move choke lever to “RUN” ( ) position to open choke. 18. AIR CLEANER - Co ...

SRM-225 CONTENTS CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. _____ 1 - Power Head / Drive Shaft Assembly _____ 1 - Operator’s Manual _____ 1 - Safety Manual _____ 1 - Warranty Statement _____ 1 - Safety Glasses _____ 1 - Echo Power Blend XTM 2-Stroke Oil Sample ...

ASSEMBLY Shield Installation (Nylon line operation) Shield with cutoff knife is for use with the Nylon Line Head only. Install shield without cutoff knife when using plastic or metal blades, or serious injury may result. 1. Place the shield on the bottom of the bearing housing flange. 2. Place shield plate (B) on shield, align holes. Install three (3) screws from bottom through plate and shield into gear case. 3. Assemble adapter plate (C) onto PTO shaft. Nylon Line Head Installation Wear Gloves or personal injury may result: ◆Cutoff knife is sharp. ◆Gearcase and surrounding area may be hot. Parts ...

SRM-225 ASSEMBLY 1. Be sure adapter plate (C) remains on PTO shaft (A). 2. Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (D). 3. Thread line head (E) onto shaft by turning it counterclockwise until head is tight against adapter plate (C). 4. Remove locking tool (D). Semi-automatic nylon line heads must be used only with debris shield with cut-off knife. Using nylon line heads with debris shield without cutoff knife can result in trimmer damage, caused by operation with excessive line length. Note: Your nylon line head may appear different than nylon line head shown. ...

Remove Nylon Line Head Note: Do not disassemble nylon line head. 1. Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (D). 2. Remove line head (E) by turning it clockwise until head is completely off of shaft. 3. Remove locking tool (D). Support Handle Installation Note: Label shows minimum spacing for support handle location. 1. If necessary, position support handle for comfortable operation and securely tighten screws. OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. A ...