Echo 99944200610 Operator's Manual

of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment. Operator’s Manual X7702273508 © 4/2015 ECHO Inc. x7722271404 / x772000164 99944200610 PAS Rapid LoaderTM Trimmer Attachment FOR MODELS: SRM-2100SB, 2400SB, 210SB, 211SB, 225SB, 260SB ...

TABLE OF CONTENTS 99944200610 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2 Introduction........................................................................................................................................ 3 The Operator’s Manual ...................................................... ...

INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safet ...

SAFETY 99944200610 Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video. SAFETY Re ...

International Symbols Personal Condition and Safety Equipment Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. Physical Condition Your judgment and physical dexterity may not be good: • If you are tired or sick. • If you are taking medication. • If y ...

SAFETY 99944200610 Hand Protection Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles. Gloves also provide protection against cuts and scratches, cold environments, and reduce the transmission of machine vibration to your hands. Hearing/Ear Protection ECHO recommends wearing hearing protection whenever unit is used. Breathing Protection Operators who are sensitive to dust or other common airborne ...

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ail ...

SAFETY 99944200610 Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from c ...

• NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings. ...

DESCRIPTION 99944200610 DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 1. LOWER DRIVE SHAFT ASSEMBLY - Includes the Debris Shield Assembly, Gear Housing assembly, Flexible Drive Cable, Rapid Lo ...

CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. ____ Pro Attachment SeriesTM Trimmer Attachment ____ Operator's Manual ____ Warranty Card ____ Storage Hook Assembly Specifications, descr ...

ASSEMBLY 99944200610 ASSEMBLY Power Head Shaft/Lower Shaft Assembly Do not perform maintenance or assembly procedures with engine running. 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. 3. Remove vinyl cap from attachment drive shaft. 4. Remove cardboard spacer, if necessary. 5. Carefully fit attachment drive shaft assembly into c ...

1. Place the shield on the bottom of the bearing housing flange. 2. Place shield plate (B) on shield, align holes. Install three (3) screws from bottom through plate and shield into gear case. Nylon Line Head Installation/Removal 1. Align hole in upper plate with notch in edge of gear housing and insert head locking tool (A). Remove plastic sleeve from PTO shaft. 2. Be sure upper plate (B) remains on ...

OPERATION 99944200610 OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Note: Refer to the Grass Trimmer / Brush Cutter Safety M ...

MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and h ...

MAINTENANCE 99944200610 Gear Housing 1. Clean all loose debris from gear case. 2. Remove plug (A) and check level of grease. Grease should fill gear case to bottom of grease plug hole. 3. Add grease if necessary using manual grease gun or squeeze-type tube. Do not use high pressure grease gun. DO NOT over-fill. 4. Install plug (A). Drive Shaft (Lower) 1. Loosen screws (B) and remove center locating screw (C). Pull gear ca ...

1. Insert pre-cut 204 mm (8 in.) length of nylon cutting line (recommended sizes 2.4 mm [.095 in.] to 3.9 mm [.155 in.]) through outside openings of trimmer head. Minimum of 153mm (6 in.) of line should extend from each opening. 3.9mm [.155 in.] line not recommended for trimmers under 28cc. Note: Insert cutting line ends to center of head recess to insure easy removal of used lines. Nylon line ca ...

STORAGE 99944200610 STORAGE Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. ...

SPECIFICATIONS MODEL 99944200610 Shaft Length 838 mm (33.0 in.) Attachment Width 178 mm (7.0 in.) Attachment Height 229 mm (9.0 in.) Weight 1.36 kg (3.1 lb.) Drive shaft 6.35 mm (1/4 in.) Flex Shaft Rotating Direction Counter-clockwise viewed from the top Cutter Head Rapid LoaderTM head (2-lines) with .095 Cross FireTM Line ...

WARRANTY STATEMENTS 99944200610 WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship. Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, an ...