Centurion CS32 RDO Installation Manual

RESULT IN SERIOUS PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE READ AND FOLLOW ALL SAFETY AND INSTALLATION INSTRUCTIONS CAREFULLY. The installation of your new Automatic Garage Door Opener (herein after referred to as “RDO”) must be carried out by a technically qualified or licensed perso ...

children and/or adults. 16 Never allow children to operate the RDO. 17. Never operate the RDO when children/persons are under or near the path of the door. Children be supervised at all times when near the Garage Door and when the RDO is in use. . . must 18. Never ...

products are only guaranteed against faulty materials and workmanship for a period of 12 months from the invoice date of the product or 14 months from the manufacturing date (as shown on the serial number label of the operator), whichever expires first. The guar ...

2. AUTO CLOSE ENABLE DIP SWITCH. 3. AUTO CLOSE DELAY DIP SWITCHES 4. SAME AS ABOVE 5 CODE BUTTON NOVA VOYAGER 6 CLOSE DIRECTION SAFETY OBSTRUCTION FORCE ADJUSTMENT SCREW 7. OPEN DIRECTION SAFETY OBSTRUCTION FORCE ADJUSTMENT SCREW 8. CODE LAMP 9. OUTPUT TERMINALS 10. RADIO RECEIVER NOVA VOYAGER 11 AUTO COURTESY L ...

Your RDO is comprised of 2 major individual components being, Drive Unit (top figure alongside) and Control Box (bottom figure alongside). This section of the manual deals with the basic fitting requirements which should be met you attempt to install your opener. Study them carefully to ensure that your door and surround ...

Weight Bar Left Or Right Hand Installation Converting For Right Hand Installation Control Box Location Before beginning the installation of the RDO check that the garage door is functioning correctly. The garage door must be well balanced and operate smoothly and freely. When opened to between 900 ...

Mounting The Control Box The plug-in battery charger is provided to keep the batteries charged to an optimum voltage. A red coloured LED, located on the charger casing will illuminate to indicate that the charger has been connected to an active power supply. In order to conserve battery power prior to inst ...

2.1 Check that the door U-bolt is securely tightened on the opposite end of the door to which the Drive Unit will be fitted (Fig.7) 2.2 Open the door fully and ensure that the bottom stoppers of the Garage Door are engaged with the stoppers on the door guide tracks. 2.3 Pla ...