Brush Grubber BG-09 Assembly Instructions

With the spring (#7) facing down place the M10x35 bolt (#13)through the base of the handle and the end of the Jaws. Secure by tightening the Lock Nut (#25) on to the M10x35 Bolt (#13). See Figure 1 Step 2: Attach The Cable To The Jaws Attach the looped end of the cable (#11) to the Center Bolt on the Jaws. Put a washer on each side ...

With the unit and jaws laid out straight and with the locking lever in the down position adjust the side handle assembly so that cable is straight with very little tension on it. See Figure 4 Next secure the Side Handle Assembly by tighten the bolts on the bracket. #11 cable #9 Locking Lever #4 Side Handle Figure 4 *note: When ca ...