BT Vision Setup Manual

Client BT Project BT Vision Set-up guide v6 Revision 04-DR Modified 03/04/09 Created 26/03/09 BT Vision Set-up guide ...

plus set-up screens. Help 10 How to get some help, if you need it, plus answers to common questions. Please note: this BT Vision Set-up guide is for use with a BT Home Hub 1.0, 1.5 or 2.0. ...

BT Vision is a TV service that uses your broadband line, so please check that your BT Home Hub is ready – its Broadband light should be glowing steady blue, or green if it’s a Hub 1.0 or 1.5. Then just follow the simple steps in this section. You’ll need about 30 minutes to set up BT Vision. Important: do not turn on your Vision+ box™ until step 7. Set-up Important: do not insert your Setanta Sports Viewing Card (if ordered) until after step 8. To find out more about using a Setanta Sports Viewing Card, please see page 11. Also ordered BT Broadband? If you prefer, we can arrange for an ...

You can put your BT Vision+ box™ close to your BT Home Hub (see Set-up A below), or in another room (see Set-up B on the next page). However, the Vision+ box™ needs to be: • close to a mains power socket • close to your TV or video recorder/DVD player (i.e. whichever you’ll be connecting to) 2 Check your box contents BT Vision Set-up guide www.bt.com/btvision Turn it on Your guide to getting the best out of BT Vision V.2 028656 Available in Braille, large print and audio CD. Please call FREE on 0800 800 150 for your copy. Set-up guide Turn it on guide Batteries Power cable SCART cabl ...

the LAN socket at the back of your Vision+ box™ 5 Connect the other end to a Powerline adapter 6 Then plug the Powerline adapter directly into a power socket and turn it on. When you’ve plugged in both your Powerline adapters, their Status lights should glow green Note: only one of your two Powerline adapters will show its AP/STBY light glowing green – it doesn’t matter which one. Important: do not turn on your Vision+ box™ yet. STATUS CONFIG RESET ON STBY ETHERNET AP/STBY 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT STATUS CONFIG RESET ...

1 Plug one end of your BT Vision aerial cable in to the RF Out socket of your Vision+ box™ 2 Then plug the other end in to the ‘aerial in’ socket of your TV, video recorder or set-top box Important: do not turn on your Vision+ box™ yet. 4 Move your existing aerial cable 1 Unplug your existing aerial cable from the ‘aerial in’ socket of your TV, video recorder or set-top box 2 Then plug it into the RF In socket of your Vision+ box™ 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT 1 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT 2 1 230V ~ 50Hz ...

Make sure your BT Home Hub’s on. Turn on your TV. 1 Plug one end of the power cable into the back of your Vision+ box™ 2 Then plug the other end into the wall socket and switch it on 3 The power light will glow green If the Power light on your Vision+ box™ doesn’t come on, press the Power button. If it still doesn’t come on, go to page 10. Important: do not insert your Setanta Sports Viewing Card (if ordered) until after step 8. To find out more about using a Setanta Sports Viewing Card, please see page 11. 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT 230V ~ 50Hz 25W USB LAN TV AUX ...

8 Follow the on-screen steps Wait for your Vision+ box™ to start for the first time – this could take up to 30 minutes. Important: do not change TV channels or any audio visual (AV) settings until set-up is complete. Soon enough, you’ll see some screens. Here’s what you’ll be asked to do. 1 You’ll see this screen for a few seconds. You may see some black or blue screens and some TV images – ignore these. ...

your new service – simply press BT Vision on your remote control, scroll to Help and then select Help Video. To find out how to use your service once BT Vision has been successfully installed, please see your Turn it on Guide. We hope you enjoy using your new BT Vision service. For the latest news about what’s on, please go to www.btvision.com 3 When you see this screen, press Select on your BT Vision remote control to scan for Freeview channels. Availability of Freeview channels depends on where you live. To check which Freeview channels you should be able to receive in y ...

www.btvision.com/help Common questions Page I still need some help. How can I get in touch? 10 My BT Vision service isn’t working. What should I do? 10 My Vision+ box™ is making a noise at start-up. Is this okay? 10 Do I have to use my Powerline adapters? 11 Can I use an extension lead with a Powerline adapter? 11 Should my Powerline adapter lights be flashing or steady green? 11 Which Freeview channels will I be able to receive? 11 I have a Setanta Sports Viewing Card. What should I do? 11 How do I set my BT Vision remote control to control my TV? 11 How do I connect using an ...

No – if your BT Home Hub and Vision+ box™ are in the same room. Yes – if your BT Home Hub and Vision+ box™ are in different rooms. Can I use an extension lead with a Powerline adapter? Yes, you can. We recommend that you plug your Powerline adapter into a wall socket and then plug any extension lead you’re using into the Powerline adapter. This is because Powerline adapters won’t necessarily work when plugged directly into extension leads that have surge protection on them. Should my Powerline adapter Status lights be flashing or steady green? When you plug in your Powerline adapters, the ligh ...

You need a High Definition TV (HDTV) to connect using an HDMI cable (not supplied). If you don’t have a cable already, you can buy one at most electronics stores or go to www.shop.bt.com Follow these steps: 1 Using your HDMI cable, connect the HDMI socket of your Vision+ box™ to the HDMI socket of your TV 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT AUDIO OU S-VIDE 230V ~ 50Hz 25W USB LAN TV AUX AUDIO OUT S-VIDEO SPDIF HDMI RF IN RF OUT 1 2 2 make sure your HDTV’s audio visual (AV) channel is selected on your TV. Some TVs will do this automatically 3 when your Vision+ bo ...

To set up your BT Vision service with other audio visual (AV) devices such as video recorders and DVD players, follow diagram A or B below. RF In RF Out Aux TV RF Out DVD/VCR VCR DVD Vision+ box™ Aux TV Vision+ box™ RF In Aerial input Aerial input TV TV RF In RF Out RF In RF Out RF In RF Out Aux TV RF Out DVD/VCR VCR DVD Vision+ box™ Aux TV Vision+ box™ RF In Aerial input Aerial input TV TV RF In RF Out RF In RF Out Diagram A Diagram B ...

modified from time to time. Services and equipment are supplied subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of a contract. © British Telecommunications plc 2009 Registered Office: 81 Newgate Street, London EC1A 7AJ Registered in England No. 1800000 Item code 039077/ V6.0 Designed by The Art & Design Partnership Ltd Terms and conditions BT Vision, BT Total Broadband and BT Broadband Talk are covered by terms and conditions. To review these, click on ‘Terms and cond ...