Black & Decker GPC900 Manual 

designed for light cleaning and scrubbing surfaces. This tool is intended for consumer use only. Your Black & Decker charger has been designed for charging Black & Decker batteries of the type supplied with this tool. General safety rules Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS. 1. Work area a. Keep work area clean a ...

binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use ...

overhead lines. Recommended for use on most painted surfaces. Not recommended for use on painted surfaces. Additional safety instructions for batteries and chargers Batteries  Never attempt to open for any reason.  Do not expose the battery to water.  Do not store in locations where the temperature may exceed 40 °C.  Charge only at ambient temperatures between 4 °C and 40 °C.  Charge only using the charger provided with the tool.  When disposing of batteries, follow the instructions given in the section "Protecting the environment". Chargers  Use your Black & Decker charger ...

The maximum reach can be achieved by fitting the extension tubes between the the brush head (3) and the handle (2). Fitting one extension tube  Align the groove on the outside of the coupling end of the handle (2) with the tongue on the inside of the coupling end of the extension tube (6).  Push the extension tube onto the handle.  Slide the collar (21) down and rotate clockwise until it is fully tightened.  Align the groove on the outiside of the coupling end of the extension tube (6) with the tongue on the inside of the coupling end of the brush head (3).  Push the brush head (3) onto the extension ...

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Your charger does not require any maintenance apart from regular cleaning. Warning! Before performing any maintenance on the tool, remove the battery from the tool. Unplug the charger before cleaning it. After use and before storage Warning! Wear proper gloves and eye protection when cleaning the tool.  After use, carefully clean the brushes.  Regularly clean the motor housing using a damp cloth. Do not use any abras ...

Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 55014, EN 60335 & EN 61000 Kevin Hewitt Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-11-2006 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanshi ...

E14994 GPC900 1 2 3 4 5 6 7 8 9 10 11 12 11 13 14 15 16 17 866 871 20 18 19 ...

Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black & Decker Tel. 01753 511234 210 Bath Road Fax 01753 551155 Slough, Berkshire SL1 3YD Helpline 01753 574277 ...