Audiolab 8300A User Instructions

Text of Audiolab 8300A User Instructions

1: Important Safety Information

one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparat

Unpack the product fully. The carton should contain:

• The Audiolab 8300A • One IEC power cord suitable for your area. • One Remote handset with two AAA batteries • This instruction manual. If an item is missing or damaged report this to your dealer as soon as possible. Retain the packing for safe transport of your unit. If you dispose of the packing, do so with regard to any recycling regulation in your area. Placement The unit is design

4: Remote Handset

Page 4 NOTE : the handset buttons shown crossed out are for use with other Audiolab units like Audiolab 8300CD and are not operational when used with the 8300A 1 STANDBY Press to bring the unit in/out of standby 2 Move to next menu page or setting 3 VOL– Press to decrease volume 4 XLR Press to select XLR input 5 PHONO Press to select PHONO input 6 VIDEO Press to select VIDEO input 7 TUNER Press to select TUNER input 8 DISP

Audiolab 8300A has one pair trigger connections on the rear panel, can be activated by

8300CD’s or any other source’s trigger output. 8300A can also provide a trigger signal to another 8300A’s or any other amplifier’s trigger input. If you have an 8300 system, we advise connecting the triggers. This will enable all 8300 units to be brought in and out of standby using the trigger connections. To connect to your control unit, you

6: Operation - 1

Page 6 Source Select Rotate the SEL knob on the front panel to select different source inputs. 8300A has AUX1, AUX2, VIDEO, TUNER, CD, PHONO, and XLR - in total 7 signal inputs. Altering the Volume Level Rotate the VOL knob on front panel to alter the volume level. The range is -80dB to +8dB, the factory default volume is -20dB. If the volume is set to lower than -20dB when unit is switched to standby, the default volume will be the last u

Audiolab Amplifier Owners Instructions: