Argosy HV359 Operation & User’s Manual

The Remote Control..................................................................2 Using the Remote Control for the First Time......................... ...

files, JPEG photo and graphic files. ‰ Supports NTFS file system. ‰ Supports both NTSC and PAL TV systems. ‰ Supports 1080i video output. ‰ Supports HDMI and component video output. ‰ Supports Music Slideshow ‰ Supports AV recording and scheduled recording. ‰ Supports external USB storage media playback. ‰ Supports playback via S ...

2 The Remote Control Using the Remote Control for the First Time For the first time use of the remote control, pull out the tab to enable the battery power of the remote control. Changing the Battery of the Remote Control If the battery becomes depleted, change the battery according to the following instructions: Take out the battery holder Turn the remote control on its back, and then press the tab on the left side with fingernailn. Hol ...

3 Buttons ○ 1 STANDBY: Activate this device / Return to Standby ○ 2 TV SYS Switch output TV system ○ 3 SETUP: Enter Setup Menu ○ 4 SOURCE: Switch among HDD/USB/Network/ AV-IN/Schedule ○ 5 AUDIO: Switch audio tracks in a movie ○ 6 SUBTITLE: Switch DVD subtitles; DivX sub On/Off. ○ 7 ANGLE: Switch DVD angles ○ 8 ZOOM: Enlarge image ○ 9 RETURN: Return to parental folder ○ 10 SLOW: Slow motion playback ○ 11 R ...

4 Parts and Functions ○ 1 Remote LED: (Orange) Blinking: Received a remote control signal. Triplet blinking: HDD error/ First time firmware installation/ Forbidden operation On: Recording in progress. ○ 2 Power LED: (Blue) Off: Standing by. On: Activated. On with 2 blinks every 5 seconds: Scheduled recording standing by. Fast blinking: Booting up/ Accessing data through PC connection. ○ 3 Power switch: Press and hold this butto ...

1. Do not operate electronics with wet hands. 2. Do not operate this device in a bathroom or near water. 3. Do not bend cables in a sharp angle. 4. Keep this device and cables out of reach of children. 5. Keep this device and its accessories away from heat sources. How do I use this device? This device plays media contents stored in its internal HDD, in an external USB storage connected to it, or on a server via S ...

Some USB 2.0 Host Controllers may require updated device driver files to operate properly. If you have problems with your USB connection, visit the Windows Update web site to make sure you have the latest Service Packs and device drivers installed on your PC before contacting technical support. Connecting via USB 1. Connect the plug of AC adapter to the co ...

appears, unplug the USB cable from the computer. In Mac OS: 1. Close all programs or Finder windows that are accessing this device. 2. Drag the drive icon onto the Eject icon (Trash can). 3. When the icon disappears from the Mac desktop, you can safely disconnect this device Installing Software 1. Do not connect this device to computer yet. 2. Insert the ...

Note: A playlist is an .m3u file. In addition to playlists created using the Playlist Manager utility, this device can use playlist files from other software players, such a Windows Media Play or Winamp. Follow the instructions below to create and manage playlists. 1. Connect this device to your computer. 2. To launch the utility, click Start → Playlist Manager → Playlist Manager. ...

This device supports NTFS file system. Connect this device to a computer via USB connection (page 6), and then use the format utility of your OS to format the internal HDD. You may need to refer to the manual of your OS for detailed instruction of its format utility. Formatting the drive will erase all existing data! If you have files on the drive you want to save, move them to another drive bef ...

1. Use a RJ45 Ethernet cable to connect this device to a network router, hub, or switch; or connect this device to the Ethernet port on a networked computer. 2. If you have not already done so, connect this device to your TV. 3. Connect the power supply to this device. 4. Activate this device by pressing the STANDBY button on the remote control. The orange LED on the front cover will light ...

ENTER button. Note: To enter a username and password to login to a network volume, press the ENTER button on the remote control. This will bring up a virtual keyboard on this device TV display. Use the remote control buttons and the ENTER button to select the necessary characters. The password can use any combination of numbers and letters (lo ...

7. Select the drive letter you want to use for this device, then enter the IP address for this device in the field next to Folder (for example, \\192.168.1.151). 8. You can now use My Computer or Windows Explorer to browse this device and copy files from your network volumes onto this device. Transferring Files to this device via the Network After mapping a drive letter to this device, you ...

HDMI Connection The HDMI connector can output both digital audio/video signals. Many HDTV sets and digital AV receivers support this type of connection. (HDMI cable not provided) To a TV: To an AV receiver: If the HDMI cable is disconnected in playback, this device will stop playback immediately. Note: Some TV sets are equipped with DVI input ports, which will receive video signals only, but these ...

If your TV supports Component Video input (Y/Pb/Pr), you can connect it for better video quality. You will have to connect the audio cable for audio output. Note: Some TV sets are equipped with separate composite and component audio inputs. Be sure that you have connected the correct one. SCART Video Connection If your TV is equipped with SCART input, connect the Composite connectors to a SCART adapter ...

1. Turn on your TV and AV receiver. 2. Press the STANDBY button on the remote control to activate this device. The activation takes about 5-7 seconds, and the LED will blink at the same time. 3. After the LED stops blinking and glows steadily bright, this device is ready to use for playback. 4. After playback, press the STANDBY button again to return to Standby mode. Note: • Always remove USB cable before activ ...

16 Using the AV Playback Function When this device is connected to a TV and activated for playback, the Home Menu will display on the TV screen. You can also jump to the Home Menu during playback or while browsing other menus by pressing the HOME button on the remote control. The options on the right hand side of the Home Menu allow you to select a location to browse for media files or select menus for configuring this devic ...