Argox PA-20 Manual 

DOC NO. UM-P2005-01 Sep. 2009 Version 1.1 Empower the Bar Code ...

notice. Copyright 2008, Argox Information Co., Ltd. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Argox. Limited warranty and disclaimers By opening the package of this product you agree to become bound by the liability and warranty conditions as described below. Under all circumstances this manual should be read attentively before installing and or using the product. In no event, Argox will be liable for any direct, in ...

INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radi ...

1. INTRODUCTION ..................................................................................................1 1.1 ABOUT THIS MANUAL .....................................................................................1 1.2 USER AND PRODUCT SAFETY .........................................................................2 1.3 SPECIFICATIONS .............................................................................................4 2. GETTING STARTED ...........................................................................................6 2.1 CHECK THE PACKAGE ................................................................ ...

7.1 RS232 CABLE FOR CRD-22 CRADLE (9-PIN TO 9-PIN) ............................... 34 7.2 USB CONNECTOR FOR CRD-22 CRADLE .................................................... 34 8. TROUBLE SHOOTING ..................................................................................... 35 8.1 GENERAL CHECKS ........................................................................................ 35 8.2 COMMUNICATION PROBLEMS ...................................................................... 36 8.3 READ OPERATION PROBLEMS .............. ...

portable applications. It has a built-in CCD /Laser scanning engine that can scan all popular bar code labels at varying distance (up to 13 inches). User’s applications can be downloaded to the terminal to adapt the terminal to the user’s situation. The operation power is supplied by the main battery (rechargeable Li-Polymer battery pack for Terminal, and a rechargeable Li-ion battery pack for Gun configuration). The CRD-22 cradle is a communication and charging station for data transmission between the (host) terminal system and the termin ...

 Never use strong pressure on the screen or subject it to severe impact, as the LCD panel can crack and possibly cause personal injury. If the LCD panel is broken, never touch the liquid inside, for such contact can irritate the skin.  Although the PA-20/ PA-21/ PA-21 mobile terminal meets IP54 standards for water and dust resistance, avoid prolonged exposure to rain or other concentrated moisture. Conditions exceeding IP54 standards could result in water or other contaminants entering the PA-20/ PA-21/ PA-21.  Use only the approved AC Adapter with the PA-20/ PA-21/ PA-21. Use of an unapproved AC Adapter could res ...

following: General Use Do not expose the mobile terminal to areas subject to extreme heat such as direct sunlight, near a heater, or in a car – or in areas that are very cold, humid, moist, or dusty. Do not expose the product to rain or water Do not subject the product to strong impact, or throw or drop the mobile terminal from large heights. Do not allow other mechanical shocks to the product. Cleaning Instructions Clean the exterior by wiping it with a soft, dry cloth. Do not use much water. Do not use thinner, white spirit or other solvents. These can disco ...

RAM 16MB FLASH 20MB Display 2.4” LCD TFT Transmissive, 240 x320 QVGA 65K colors LED Blue, Green and Red Keypad 29 Numeric Alert Buzzer, Vibrator Power Operating power Terminal: Rechargeable 3.7V 1950mAh Li-Polymer Battery Gun type: Rechargeable 3.7V 5000mAh Li-ion Battery Working hour (scan / 5 sec) > 18 hours (1950mAh) > 47 hours (5000mAh) > 15.5 hours(1950mAh) > 40 hours(5000mAh) Data retention 15-min data retention Data retention 2.5 days Scanner Scanner system Long Range CCD scanner 2048 pixels Resolution 0.127mm (5mil) at PCS 9 ...

Storage Temperature -20℃ to 70℃ / -4℉ to 158℉ Humidity Operating: Non-condensed 10% to 90% Storage: Non-condensed 5% to 95% Impact resistance 1.2M/4ft (Terminal) 0.9M (Cradle) IP54 Electrostatic discharge +/- 15 KV air discharge +/- 8 KV direct discharge EMC Regulation FCC, CE, BSMI, Developing tools Software Windows based application generator: Architect Software Development Kit (SDK) Program Language C language(SDK), Basic(Architect) Accessory Charging & Communication Cradle Pistol Grip, C&C cable, Holster ...

charge the batteries, how to remove and replace the strap assembly and how to start the PA- 20/ PA-21/ PA-21 for the first time. 2.1 Check the package Carefully remove all protective material from around the PA-20/ PA-21/ PA-21 and save the shipping container for later storage and shipping. Depending on the configuration ordered, the PA-20/ PA-21/ PA-21 shipping container may include: 2.1.1 PDT Package  PA-20/ PA-21/ PA-21  Power supply  Battery pack  Quick Reference Guide  Hand strap  CD ROM Figure 2-1 PDT Package Battery ...

Inspect the package contents for damage. If any item is missing or damaged, please contact the Argox Technical Support Center immediately. USB cable Cradle ...

2.2.1 Terminal Dimensions of Terminal 168.8mm (L) x 70.1mm (W) x 34.0mm (H) Details of Terminal Left side Front Right side Back Top Bottom Figure 2-3 Terminal 1 Reading Window Optical beam of LED for barcode reading will be emitted from here 2 LED Indicator Can be used to indicate results, for example bar code reading / status of communication 3 LCD Display For displaying information and battery status 4 Stroke keys A total of 29 keys are provided to turn power ON and OFF and for other operations. 5 Reset switch Use a paper clip or other thin object to press the RESET switch located inside the hole. 6 Hand strap hook Used t ...

162.4mm (L) x 112mm (W) x 93.9mm (H) Details of CRD-22 Cradle Front Back Figure 2-4 The Details of the CRD-22 1 Terminal Slot Put the terminal on the cradle through this slot for data transmission or charging 2 Power LED Indicator Power indicates 3 Charging LED Indicator Indicates the charge status of the battery. Green: no battery or charging complete Red: battery is charging 4 Power and Communication Contacts To connect with the multiple function socket on the terminal for data transmission and charging 5 Charging Slot For charging a spare rechargeable battery pack 6 RS-232 Socket For connecting to PC seria ...

further in the manual. 2.3.1 Terminal The hand strap protects the Terminal from being damaged as a result of it being dropped by mistake during movement. Follow the procedure below to attach the hand strap. To attach the hand strap 1. Fix the small cord of the strap around the pillar of the terminal. 2. Insert the handle of the strap in the thin loop. 3. The strap is fixed to the terminal. 4. Hold the hand strap around the wrist when carrying the terminal. Figure 2-5 Hand strap Start with a full battery 1. To be sure of proper operation, it ...

the AC adapter to the mains outlet. The LED on the cradle turns green. Battery Charging 1. When the PA-20/ PA-21 terminal with the rechargeable battery pack is placed in the cradle, the LED on the cradle turns orange first and turns green at once then it starts to charge the terminal. 2. When the PA-20/ PA-21 terminal was removed from the cradle, the LED on the cradle turns orange first and turns green at once. Figure 2-6 Batter Charging Terminal on cradle Take notice that the PA-20/ PA-21 cradle is designed for the PA-20/ PA-21 terminal ...

Wrong use of batteries might cause serious damage to the terminal or to the cradle. In order to avoid damage, it is very important to take notice of the instructions. Caution:  Insert a fully-charged battery pack before use of the terminal.  Never remove the main batteries while the terminal is turned on. Doing so may lose data in the terminal.  Use only recommended batteries. When other batteries are used, defects or other problems can occur. Before installing (new) batteries, please make sure you are using the recommended batteries.  Use the right charger for batteries. The rechargeable ...

How to install or replace the main battery in the terminal 1 Slide the main battery compartment cover lock to the FREE position and remove the cover 2 Load a lithium-ion battery pack into the main battery compartment in the direction shown in the figure 3 Attach the battery compartment cover to the terminal and slide the main battery compartment cover lock to the LOCK position. Figure 2-7 Installing / Replacing the Main Battery Note: Please follow the above procedure in reverse to reassemble the battery cover. Be sure to turn the terminal OFF before you do this. ...

1 Attach the battery compartment cover to the terminal and slide the main battery compartment cover lock to the LOCK position. Figure 2-9-1 Installing /Replacing The Gun Grip Battery 2 Attach the battery compartment cover to the terminal and slide the main battery compartment cover lock to the LOCK position. Figure 2-9-2 Installing /Replacing The Gun Grip Battery ...

Figure 2-10 Charging with Cradle How to charge Argox rechargeable battery pack in the cradle 1. Make sure that the Argox rechargeable battery pack is inserted in the terminal. If the terminal with the battery pack is placed in the cradle, the LED on the cradle will turn Orange first and turn to Green at once. When the terminal is placed in the cradle, the rechargeable battery pack will be charged automatically. 2. If you have a spare Argox battery pack, you can replace the empty battery pack with a full battery pack for continuous terminal operation. And put the empty battery pack in the charging slot of t ...