Amina AIW750E Installation Manual
Text of the manual
Caution: Read before installing this product
To ensure optimal performance, please
read this guide carefully and keep in a
safe place for future reference.
Install this product in a cool, dry, clean
place - away from direct sunlight and
heat sources, vibration, chemical fumes,
dust and moisture (steam).
Do not expose this product to sudden
temperature change
Message from the Managing Director
Included in the Carton / Packaging / Fixing options
Cutting the plasterboard (drywall)
Installing the BackboxCV345 & BackboxCV200
Installing the BackboxCV345 & BackboxCV200
Plastering and decorating
Plastering and decorating
Testing the speakers
Setup tips
Setup tips
Setup tips
Further details
Troubleshooting
Speci
Message from the Managing Director
Congratulations and thank you for purchasing an Amina Technologies Evolution Series
high performance invisible loudspeaker.
At Amina we are proud of being at the forefront of flat panel loudspeaker technology. All
the components that make up your Evolution Series loudspeaker have been developed
specifically to provide the u
Included in the Carton
Packaging
Fixing options (ordered separately)
CAUTION:
Take care when removing the speakers from the carton.
The packaging for the AIW750E loudspeaker has been carefully designed to protect
the product during transit. Please retain it in the unlikely event you need to return the
product to your dealer or manufacturer. Please recycle th
Cutting the plasterboard (drywall)
03
Preparing the wall/ceiling and fixing the product
Locate joist/stud work
When you have chosen your speaker
locations, before cutting a hole in the
plasterboard it is important that you
locate the position of the joists/studs.
Ensure the spacing between them is at
least 350mm (133/4”) for a portrait ori-
Create 455mm x
Installing the BackboxCV345 & CV200
04
Locate cable and position backbox
Pull the speaker cable through the rubber
grommet in the top side of the backbox
and ensure speaker cables are pulled
through with a manageable length
available. Apply the Backbox through the
hole at an angle until the end cheeks rest
against the back side of the
plasterboard.
Use the f
Installing the Backboxes continued...
05
Secure the speaker
With the speaker resting on the
backbox mounting lip, use screws
provided to secure the speaker onto the
backbox by self tapping into the
mounting lip, through the pilot holes
provided at each corner.
Ensure the speaker face is flush with the
front of the plasterboard and that
everything is firmly h
Plastering and decorating
06
Apply PVA
Using a brush or foam roller, apply a
thin coat of neat PVA (wood glue) to the
entire speaker panel surface, this will
assure proper adhesion between the
panel surface and the plaster coating.
Important: Amina recommends you
leave the 1 coat of PVA to completely
dry. Once dry, add another single coat
of PVA immediately