Applied Wireless VT900-3A Operation & User’s Manual

Text of Applied Wireless VT900-3A Operation & User’s Manual

Instructions for Installation and Operation

900 MHz Video Transmitter Model VT900-3A 900 MHz Video Receiver Model VR900-3 Long Range Wireless Applications This page intentionally left blank.

Applied Wireless, Inc.

900 MHz Video Transmitter Models VT900-3A 900 MHz Video Receiver Model VR900-3 Product Descriptions Model VT900-3A from Applied Wireless, Inc. is a high quality transmitter designed to broadcast standard NTSC or PAL composite video signals to the Applied Wireless model VR900-3 receiver. The VT900-3 conforms to FCC Part 15 requirements

Selecting the Channel of Operation

Referring to Figure 1, use a small flat-blade screwdriver to select the channel (frequency) on which the transmitter will operate, by aligning the triangle-shaped pointer (not the screwdriver slot) to the number of the desired channel. Set the receiver to the matching channel. Channels are as follows: Channel 1: 907 MHz Cha

Using the Combination Power/Video Connector(s)

As an alternative to using standard audio and video interconnect cables, the VT900-3 transmitter and the VR900-3 receiver each provide a combination Power/Video connector on the unit’s rear panel. The pinout of these connectors is the same for both transmitter and receiver. The pinout of the combination Power/

For maximum range, the receiver’s

antenna must be oriented vertically. Line Level Inputs VIDEO OUT AUDIO OUT Rear panel of receiver Display device (e.g. TV, video monitor, VCR, DVR, etc. ) Receiver Connection Diagram Composite Video Input Transmitter Specifications VT900-3A Operating Frequency Channel 1 907 MHz Channel 2 915 MHz Channel 3 923 MH

Applied Wireless Receiver Owners Instructions: