ACTi ACM-1430 series Quick Installation Manual

(with DC 12V / PoE / AC24V) ACM-1430 series Ver. 070709 Quick Installation Guide ...

(DC12V / PoE / AC24V) Product CD Terminal Block for Power Warranty Card 1 ...

the connector to connect to power. If your power input is AC24V. Please follow the description on the connector to connect to power. PIN NAME DESCRIPTION 1 N 2 L AC Power Input 3 GND E-Ground of power PIN NAME DESCRIPTION 1 12V DC Power Input 2 GND Grou ...

The IP device supports audio input and output, and video output with terminal block. 3. Reset Button Step 1: Switch off IP device by disconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset b ...

apparatuses. 1. Connect an analog monitor to IP device video out (BNC connector). 2. Connect the power adaptor to IP device 3. Connect IP device’s ethernet port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, you can regard it as a PD and ...

2.1 Configure this IP Device 2.1.1 Make sure network environment Default IP of this IP device is 192.168.0.100. Please make sure this IP device and your PC are on the same network segment before running the installation. 2.1.2 Open Internal Explorer with IP address 2 Please set the ...

recommended. NOTE: This IP device default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click button. 2.1.4 Preview the video ...

*IP Address : The default IP address is 192.168.0.100. *Subnet Mask : The default subnet mask is 255.255.255.0 *Click button NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotation, since this IP device follows MII standard. Otherwise, you might not see the live image. IMPO ...