ACTi CAM-5120 Quick Installation Manual

Power Adaptor Accessory 1 ...

1. Auto IRIS Output 2. Auto IRIS Control: Video / DC (Switchable) 3. Video DC Level Adjustment 4. Auto Electronic Shutter: AES OnL 1/50 (60) sec. ~ 1/100,000 sec; AES Off: 1/50 (60) sec. 5. Back Light Compensation: On / Off (Switchable) 6. Flickerless: On / Off (Switchable) 7. Automatic Gain Control: On / Off (Switchable) 8. Auto Whi ...

RS485 port with RJ45 connector. 2. Reset button Step 1: Switch off IP camera by disconnecting the power cable Step 2: Using a suitable pointed object, press and continue to hold the Reset Button depressed. While continuing to hold the reset button depressed, reconnect the p ...

RS-485 Cable Pin Assignment P8…………….P1 Pin RS-485 1 GND 2 D- 3 D+ 4 GND 5 GND 6 - 7 - 8 GND ...

The Ethernet cable and power cable are necessary for previewing function.Make sure all cables are correctly and firmly connected. 1. Connect an analog monitor to CAM-5120 Video Out (BNC connector) 2. Connect the power adaptor to CAM-5120 3. Connect CAM-5120 LAN port to an Ethernet hub (RJ45 connectors) 4. Connect a PC to the Eth ...

2.1 Configure IP Camera 2.1.1 Make sure network environment Default IP of IP camera is 192.168.0.100. Please make sure IP camera and your PC are on the same network segment before running the installation. 2 Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255. ...

NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: CAM-5120 default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click button. ...

NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotation, since CAM-5120 follows MII standard. Otherwise, you might not see the live video. ...

z Host Name : Enter in the domain name, Default Host Name is ACTi. z Language : Language setting for Web Configurator after Save Reboot. Default setting is English. z IP Address : The IP address of the LAN interface. The default IP address is 192.168.0.100. z Subnet Mask : The subnet mask of the LAN interface.The default subnet m ...