ACTi CAM-5200S Quick Installation Manual

1 Getting Started _________________________________________________ 1-1 1.1 PACKAGE CONTENTS _________________________________________ 1-1 1.2 PHYSICAL DESCRIPTION ______________________________________ 1-2 1.3 CONNECT NECESSARY CABLES _______________________________ 1-6 2 Quick Tour ____________________________________________________ 2-1 ...

CAM-5200S/5201S Warranty Card Software CD Terminal Blocks for Power & DI/O Power Adaptor (Option) Accessory 1 ...

1. Microphone Input Sensitivity: -44dB(0dB=1Vpp at 1KHz) S/N Ratio: More than 58dB Directivity: Omni directional 2. Auto Iris Video / DC (switchable) 3. Video DC Level Adjustment 4. CCD Functions



Auto Electronic Shutter Speed Mode AES On: 1/50 (60) sec. ~ 1/100,000 sec; AES Off: 1/50 (60) sec.



Back Light Compensation ON ...

5. WAN port The IP Camera connects to the WAN (wide area network) via a standard RJ45 connector. Supporting NWAY, this IP camera can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). The WAN port is for FTTH and can connect to a xDSL or cable modem. With PoE built-in product, you can power the IP camer ...

it. 7. Analog Video Output The IP camera supports one channel analog video output. 8. LAN port The IP Camera connects to the LAN (local area network) via a standard RJ45 connector. Supporting NWAY, this IP camera can auto detect the speed of local network segment (10Base-T/100Base-TX Ethe ...

The Ethernet cable and power cable are necessary for previewing function. Make sure all cables are correctly and firmly connected. 1. Connect an analog monitor to IP Camera video out (BNC connector). 2. Connect the power adaptor to IP Camera 3. Connect IP Camera’s LAN port to an Ethernet (RJ45 connectors). If your IP camera ...

2.1 Configure the IP Camera 2.1.1 Make sure network environment Default IP of IP camera is 192.168.0.100. Please make sure IP camera and your PC are on the same network segment before running the installation. 2 Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: ...

NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: The IP camera default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click button. ...