Advantech UTC-315 Operation & User’s Manual

Processor- based Ubiquitous Touch Computer with 15.6” TFT LCD ...

ii Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Inf ...

Declaration of Conformity FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions ...

iv Packing List Before you begin installing UTC-315, please make sure that the following materials have been shipped:  UTC-315 series  Accessories for UTC-315 – Warranty card – 1 x adapter – 1 x SATA cable – Packet of screws If any of these items are missing or damaged, contact your distributor or sales repre- sentative immediately. Technical Support and Assistance 1. Visit the Advantech web site at http://support.advantec ...

Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reli ...

Contents Chapter 1 General Information ............................1 1.1 Introduction ............................................................................................... 2 1.2 General Specifications .............................................................................. 2 1.2.1 General ......................................................................................... 2 1.2.2 Standard PC Functions........... ...

viii Table 4.3: JP1:LCD POWER .................................................... 23 Table 4.4: JP3:Clear CMOS...................................................... 23 Table 4.5: JP4:AT/ATX POWER SEL ....................................... 24 Table 4.6: CN17:COM1 Ring .................................................... 24 Appendix A I/O Pin Assignments......................... 25 A.1 PIN Assignments ................................... ...

information on the UTC-315. Sections include: Introduction General Specifications LCD Specifications Dimensions ...

2 1.1 Introduction UTC-315x is the multi-purpose all-in-one computing system which equipped with wide format, touch based LCD panel. It is easy to integrate key peripherals and dis- play systems for diversified self-service and interactive signage deploy in different application areas. With the removable frame , the system also could fulfill industries or control system applications with panel mounting design. UTC series touch panel com ...

Chapter 1 General Information 1.2.5 Touch screen (Optional) 1.2.6 Environment  Operating temperature: 0 ~ 40° C (32 ~ 104° F)  Storage temperature: -20 ~ 60° C  Relative humidity: 10 ~ 95% @ 40° C (non-condensing)  Shock: 10 G peak acceleration (11 ms duration)  Certification: EMC: CE, FCC, BSMI, VCCI. Safety: UL 60950, CB, CCC, BSMI  Vibration: 5 ~ 500 Hz 0.5 G RMS Random vibration  VESA Support: 75 x 75 mm ...

4 1.3 LCD Specifications  Display type: 15.6" TFT LCD  Max. resolution: 1366 x 768  Colors: 262 K  Pixel Pitch (um): 252 (H) x 252 (V)  View Angle: 90°/60°  Luminance: 200 cd/m2 1.4 Optional modules  Memory: 1 x SO-DIMM DDR3L 1333 MHz up to 8 GB  HDD: 2.5" SATA HDD  Operating System: Windows Embedded Standard 7, Windows Embedded Standard 8, Embedded Linux 3.0  Touchscreen: Analog resistive (UTC-315D-RE/UT ...

Chapter 1 General Information 1.5 Dimensions Figure 1.1 Dimensions of UTC-315 ...

on the UTC-315. Sections include: A Quick Tour of the UTC-315 Installation procedures Running the BIOS Setup Program Installing System Software ...

8 2.1 A Quick Tour of the UTC-315 Before you start to set up the UTC-315, take a moment to become familiar with the locations and purposes of the controls, drives, connectors and ports, which are illus- trated in the figures below. When you place the UTC-315 upright on the desktop, its front panel appears as shown in Figure 2.1. Figure 2.1 Front view of UTC-315 When you turn the UTC-315 around and look at its rear cover, you will find t ...

Chapter 2 System Setup A. COM Port B. Line-out C. MIC-IN D. Gigabit LAN x2 E. HDMI F. USB2.0 x5 / USB3.0 x1 G. Power switch H. DC-IN 2.2 Installation Procedures 2.2.1 Connecting the power cord The UTC-315 can be powered by a DC electrical outlet. Be sure to always handle the power cords by holding the plug ends only. Please follow the Figure 2.3 to connect the male plug of the power cord to the DC inlet of the UTC-315. 2.2.2 Connectin ...

10 2.3 Running the BIOS Setup Program Your UTC-315 is likely to have been properly set up and configured by your dealer prior to delivery. You may still find it necessary to use the UTC-315's BIOS (Basic Input-Output System) setup program to change system configuration information, such as the current date and time or your type of hard drive. The setup program is stored in read-only memory (ROM). It can be accessed either when you turn ...

Chapter 2 System Setup Select OS Selection [Windows 8.x/ Android / Windows7] COM2 RS232/RS422/RS485 Selection: Enter Into BIOS setup → Advanced → NCT6106D Super IO Configuration. ...

12 Select Serial Port 2 Configuration. Change Serial Port 2 Mode [RS232/RS422/RS485]. ...