AEG Electrolux EWF695 Operating Instructions Manual

                                                      ...

the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. The symbols you will see on some paragraphs of this bookl ...

the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. • Any electrical work required to install this appliance must be carried out by a qualified electrician. • Any plumbing work required to install this appliance must be ...

Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites for your old appliance. Help to keep your country tidy! The symbol on the product or on its packaging indicates that this product may no ...

before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the two rear bottom screws. Slide out the two plastic pins. 2. Lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine ...

short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. Important! Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. Water drainage The end of the drain hose can be position ...

detergent consumption. • The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme. • The special wool programme with its new delicate wash system treats your woollens with extreme care. • The automatic cooling of the washing water from 90° to 60°C before draining will ...

2 Delay start button This button makes it possible to delay the starting of the washing programme by 8 or 4 hours. The delay you have selected is indicated by the coming on of the corresponding light. You must select this option after you have set the programme and before you press the Start/Pause button. You can cancel the delay time at any moment, before you press the Start/Pause button. If you have already pre ...

laundry. 6 Spin reduction button By depressing this button you can reduce the spin speed proposed automatically by the machine according to the fabric or select the option + «Rinse hold». The relevant light illuminates. EWF 695 EWF 895 The spin speed is reduced as follows: Model EWF 895 • programmes for cotton and linen, synthetics, wool/handwash: from 850 to 400 rpm; • programmes for delicates: from ...

Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synthetic fibre ...

removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth a ...

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max. wash temperature 30°C Hand wash Do not wash at all Bleaching Bleach in cold water Do not bleach Ironing Hot iron max 200°C Warm iron max 150°C Lukewarm iron max 110°C Do not iron Dry cleaning ...

5. Select the required options The light corresponding to the depressed button illuminates. 6. Select the “Delay Start” option To delay starting of a programme, press the “Delay Start” button, before starting the machine, until the light corresponding to the required delay illuminates. 8. Start the programme Depress “Start/Pause” button, the corresponding pilot light stops flashing and stay ...

the new programme position. Start the new programme by depressing the “Start/Pause” button. The washing water in the tub will not emptied out. 10. Interrupting a programme Depress the “Start/Pause” button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme. 11. Cancelling a programme Turn the sele ...

on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme. ** In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the “Cotton 60°+ Economy selected” wash programme. *** Only at ...

* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. Programme Rinses Temperature/ Programme Programme description Additional functions Wash load max. Energy kWh Water lt Duration min. Consumptions* For rinsing hand washed items 3 rinses with liqui ...

water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. 3. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits in the drawer. Clean the ...

• Pull out the emergency emptying hose, place it in the bowl and remove its cap. • When no more water comes out, unscrew the pump cover and remove it. • Remove any objects from the pump impeller by rotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump cover fully in. • Close the pump door. 6. Emergency emptying out ...

During machine operation it is possible that the ( End) light starts to flash: 4 flashes= the door has not been closed 2 flashes= the machine does not empty 1 flash= the machine does not fill. Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all checks, the problem persists, contact your local Service Centre. Proble ...

contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.            Problem Possible cause • Water is not visible in the machine: • The machine, which is the result of ...