Rane SIXTY-TWO Operation Manual

Text of Rane SIXTY-TWO Operation Manual

VirtualDJ 8 – Rane Sixty-Two

2 Table of Contents Installation ................................................................................................................................ 3 Connections ........................................................................................................................... 3 Drivers .......................................................................................................................
VirtualDJ 8 – Rane Sixty-Two 3 Installation Connections  Connect your computer to USB A (or B) port at the rear panel of Rane Sixty-Two.  Connect your Left deck’s RCA cables to ANALOG INPUT 1. If it’s a CD player, select CD with the switch above the input jacks. If it’s a turntable, select PH (Phono) with the switch above the input jacks. Secure the ground wire to a Phono Ground terminal.  Connect your Right deck’s RCA cables to ANALOG I
VirtualDJ 8 – Rane Sixty-Two 4 Drivers Windows: Download and install the necessary ASIO drivers from http://dj.rane.com/products/sixty-two (Downloads tab) Mac OSX: Download and install the necessary CoreAudio drivers from http://dj.rane.com/products/sixty-two (Downloads tab) . . VirtualDJ 8 Setup Download and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already) Once VirtualDJ 8 is launched, a Login Win
VirtualDJ 8 – Rane Sixty-Two 5 Advanced Setup MIDI Operation The unit should be visible* in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list. The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions. Find more details at http://www.virtualdj.com/wiki/VDJscript.html AUDIO Setup The unit has a pre-defined Aud
VirtualDJ 8 – Rane Sixty-Two 7 S. SHIFT. Press and hold this button down to access secondary software or hardware functions (mostly in gray lettering) of other controls on the Rane Sixty-Two A. Volume Mixer 1. CROSSFADER. Blends audio between the left and right channels/decks. 2. VOLUME. Use these faders to adjust the Output Volume of each mixer channel. 3. CUE. Press these buttons to send a channel's (left, right or USB Aux) pre-fader signal to the Phon

Rane Music Mixer Owners Instructions: