D-Link DWL-AG132 Install Manual

Installing the Drivers 2 System Requirements Minimum System Requirements: Computers with Windows XP/2000 operating system with an available USB 2.0 port Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above Manual on CD Cradle D-Link AirPremier AG DWL-AG132 Wireless AG USB 2.0 Adapter Package Contents ...

Installing the Drivers Installing the Drivers The step-by-step instructions that follow are shown in Windows XP. The steps and screens are similar for the other Windows operating systems. Turn on the computer and insert the D-Link AirPremier AG® DWL-AG132 Driver CD in the CD-ROM drive. The installation Wizard will automatically app ...

Installing the Drivers Installing the Drivers (continued) Click Next Click Finish Click ‘Yes, I want to restart my computer now.’ You have completed the installation of the drivers! ...

Connecting the DWL-AG132 Begin by pressing down on the cover with your thumb. USB Port - used to connect the DWL-AG132 to your computer. Link/Power LED Link - indicates that the DWL-AG132 is properly installed. Activity - blinks when data is being transmitted through the wireless connection. Remove the protective covering from the D ...

The Found New Hardware Wizard 6 C l i c k C o n t i n u e Anyway. The Found New Hardware Wizard Click Next Select Install the software automatically (Recommended). After connecting the DWL-AG132, the Found New Hardware Wizard (Windows XP) screen will appear: ...

The Found New Hardware Wizard 7 Click Next Select Install the software automatically (Recommended). Click Continue Anyway. Click Finish to complete the installation. D-Link AirPremier AG DWL-AG132 USB Adapter ...

Your Installation is Complete! 8 If the utility icon does not appear, double-click the shortcut icon that has appeared on your desktop. After completing the Found New Hardware Wizard, the D-Link AirPremier AG DWL-AG132 Configuration Utility will automatically start and the utility icon will appear in the bottom right ...

do the following: 9 Using the Utility in Windows XP Click the XP networking icon to use the Zero Configuration Wireless Settings. Click Advanced. Uncheck Use Windows to configure my wireless network settings. Click OK. ...

Status: Displays the MAC Address of the access point that is associated with the DWL-AG132. SSID: Displays the Service Set Indentifier assigned to the wireless network. Frequency: Displays the current frequency used by the adapter. Wireless Mode: Displays the wireless mode. The default is Infrastructure. Encrypt ...