3DR Solo Operation & User’s Manual

online: 3dr.com/support email: [email protected] call: +1 (858) 225-1414 (direct) +1 (855) 982-2898 (toll free in the US and Canada) Support line hours: Mon-Fri 8 am to 5 pm PST 3D Robotics (3DR) 1608 4th Street, Suite 410 Berkeley, CA 94710 Tel. +1 (858) 225-1414 3dr.com Solo User Manual ...

6 2.2 Battery 6 2.3 Controller 8 2.4 Propellers 9 2.5 Camera 9 2.6 Mobile App 11 3 Safety 15 3.1 Location 15 3.2 Environmental Awareness 15 ...

39 9.2 Calibrations 40 9.3 Pairing 41 9.4 Legs 42 9.5 Battery Tray 45 9.6 Motors 46 9.7 Factory Reset 48 10 Appendix 49 10.1 Specifications 49 10.2 Warranty 50 10.3 Regulatory Compliance 50 ...

1 Figure 1.2.4.1: Solo Overview 2 Figure 1.3.10.1: Controller Overview 4 Figure 1.4.10.1: Solo Operating Parameters 4 Figure 1.6.10.1: Solo Motor Order 5 Figure 2.1.10.1: Solo Parts 6 Figure 2.2.1.1: Solo Battery Charging 7 Figure 2.2.2.1: Powering Solo 7 Figure 2.3.1.1: Controller Charging 8 Figur ...

inspired by our favorite cinema pilots. With Solo, you don’t need a professional camera crew, you can get the perfect shot every time. We’re excited to share our passion with you and help you see your world from a new per ...

when the battery is connected. 1.2.2 Motors and Propellers Solo’s arms are labeled one through four on the ends of the arms. Motors on arms #1 and #2 spin counterclockwise and use clockwise-tigh ...

operational flow. A user-supplied smartphone or tablet is required to initialize Solo and use Smart Shots. 1.3.2 Joysticks The controller’s left and right joysticks provide direct manual control ...

1.4 Operating Parameters The following operating parameters apply to Solo. Always operate Solo within these parameters. Solo’s performance and behaviors are not guaranteed when conditions violate the parameters listed below. Figure 1.4.10.1: Solo Operating Parameters *Flight time varies with payload, wind conditions, ...

the MAVlink communication protocol. Pixhawk 2 runs an ARM Cortex-M4 STM32F427 processor with 2 MB of flash memory and 256 KB of RAM. Combined with an array of CAN, I2C, SPI, PWM, and UART interfaces, Pixhawk 2 uses a suite of on ...