3S n8072 Operation & User’s Manual

2 Megapixel + H.264 - 2 - TABLE OF CONTENT INTRODUCTION .......................................................................................................................................................................... 4 FEATURES .......................................................................................................................................................................................... 4 PACKAGE ...

2 Megapixel + H.264 - 3 - Snapshot ................................................................................................................................................................................................. 39 Record ................................................................................................................................................................................................... ...

2 Megapixel + H.264 - 4 - Introduction N8072 is a cube network camera which is with H.264 high resolution. Unlike traditional CCTV, it is built in the Web Server and Camera to provides users with mechanism for the 24 hours security and it can deliver dual video streams simultaneously (H.264 or Motion JPEG), allowing for optimization in image quality and bandwidth. It provides a professional application to remote monitors (VMS). It ...

2 Megapixel + H.264 - 5 - Package Contents After unpacking, check that if all the following items have been included:  N8072 Cube Network Camera  Installation CD (Manual & Software)  Quick Guide  Tripod  Screw Pack Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. ...

2 Megapixel + H.264 - 6 - System Requirements Before installing N8072 Cube Network Camera, please make sure your system has the following recommended minimum hardware requirements. Internet Environment Ethernet 10/100M Ethernet Monitor System Requirements OS support Windows 2000, XP, Vista and 7 Browser support Internet Explorer 6.x or later Hardware CPU: Pentium 4 2.4 GHz or later Memory: 512 MB (1G MB recommended) VGA card resol ...

2 Megapixel + H.264 - 7 - View of N8072 Cube Network Camera Front View Rear View ...

2 Megapixel + H.264 - 8 - Making Connections Before you connect your N8072, please make sure your PC has the LAN port available for connect to the network. Follow these instructions to connect the N8072 into your PC and LAN Port. DESCRIPTION 1. Micro SD Card Slot Insert the Micro SD Card here. 2. LAN/PoE Connect to 10/100 RJ45 network / PoE here. 3. POWER Connect to Power here. 4. Reset Button Reset to factory setting Micro SD Car ...

2 Megapixel + H.264 - 9 - Lan Connect to the Switch HUB. Use a network cable and plug it into the LAN port of the N8072. Plug the other end of the cable in the LAN port of the HUB. Connect to the Switch HUB to PC. Make sure your PC has a LAN port available for connect to the network. ...

2 Megapixel + H.264 - 10 - Power Please connect N8072 Cube Network Camera to the power supply from the DC/POE Power Inlet. The power inlet of N8072 Cube Network Camera is non-polarized, it can automatically determine the type of the incoming current. NOTE： N8072 provides 2 different kind of power input including DC & POE. PoE Power Over Ethernet IEEE802.3af (Option) Please make sure the accurate model to come with the purchasing ...

2 Megapixel + H.264 - 11 - Factory Reset N8072 provides a function for you to reset the N8072 to the factory default settings. If there is still system problems remain after rebooting, factory reset can return the camera to normal operation after resetting. The following diagram illustrates will show you how to reset the N8072 Cube Network Camera. Press and release the reset button with a paper clip or thin object for 5 seconds Wa ...

2 Megapixel + H.264 - 12 - Getting Started After you have finished install the N8072 Cube Network Camera. Please check if it is ready to use by the Led indicator as below: NET The LED Indicator will light in green when the network connected. STATUS (S.T) The LED Indicator will light in yellow when any event triggered. POWER The LED Indicator will light in red when the power on. ...

2 Megapixel + H.264 - 13 - Hardware Installation Before getting to start the N8072 Cube Network Camera, please adjust N8072 in accordance with the following steps first. Make sure that no steel bars or power cables exist behind the position where the product is to be fixed. Some walls or ceilings may not be strong enough to support it. Pay attention during installation to avoid injury that might be brought about due to falling of ...

2 Megapixel + H.264 - 14 - Tripod Mounting N8072 Cube Network Camera can be fixed on the wall (Fig.1) or hung from the ceiling (Fig.2). Make sure that no steel bars or power cables exist behind the position where the product is to be fixed. Some walls or ceilings may not be strong enough to support it. Pay attention during installation to avoid injury that might be brought about due to falling of the product. NOTE: N8072 Cube Netw ...

2 Megapixel + H.264 - 15 - Adjust the Lens Angle The following diagram illustrates will show you how to adjust the tripod of N8072 Cube Network Camera.  Loosen the screw on the side then it can be up and down.  Loosen the screw on bottom then can be turn whole around. ...

2 Megapixel + H.264 - 16 - Software Installation After the hardware has been installed, insert the installation CD into the CD-ROM driver and run the “Cam Finder.exe” following the steps below to search and change the IP address of N8072 Cube Network Camera. NOTE： If the network environment has the router, please refer to Appendix: Set up the Router Setting with IP Camera for different environment description. 3. Start the C ...

2 Megapixel + H.264 - 17 - 6. Submit data Click Submit to apply the new settings. 7. Confirmation Click Exit to quit, after all changes have been confirmed. NOTE : The Cam Finder can only find the IP addresses of the cameras that share the same hub on the LAN. For more information about finding IP addresses on the Internet, refer to the “DDNS Setting”, or “UpnP Setting”. All 3Svision camera/network server products can be f ...

2 Megapixel + H.264 - 18 - Ready To Use Access to the IP Camera You can access the IP Camera through web browsers, follow the instructions to install the required plug-in on your computer. 1. Using Web Browsers Launch your web browser. (eg. Microsoft Internet Explorer, Mozilla Firefox or Netscape…) and enter the IP address of the IP Camera in the address field. After fill in "root" in the User Name and Password fields, Click OK. ...

2 Megapixel + H.264 - 19 - 2. Installation of Internet Explorer ActiveX Controller After the Username and Password are confirmed, a control setup screen pops up under the IE address bar. Click “Install ActiveX Control” to continue. The security warning screen appears. Click "Install". The ActiveX Control is named “ActiveX Control". This software is owned by PocketNet and well certified. You can use it without any doubts abou ...

2 Megapixel + H.264 - 20 - View of Camera Main Page Once you have installed the software from the IE and you are ready to start the setup menu. The Camera utility enables you to change language, video settings. And you can also change the other setting by “Setting”. Live View 3Svision Logo Click here to visit the website of POCKETNET Tech. Inc. Shortcuts 3Svision Logo Product Name Language Video Format View Size Streaming Colo ...