Panasonic DP-130 Series Setup Procedure

DP-130/135/150 Series Option Model No . DA-DS150 Table of Contents Setup Procedure ............................. 2 Before setting up Releasing Scanner Removing Shipping Materials Installing Toner Cartridge Installing Paper Connecting Printer Cable and Telephone Line Setup Procedure For Option.......... 8 2nd Paper Feed Module Handset Unit Expansion Flash Memory Card Installing Printer Driver ................ 12 For Windows 95/98 For Windows NT 4.0 For Windows 2000 Installing Panasonic Document Management System .. 24 Installing Panasonic Class 2 Fax Modem........................................... 27 This setup guide includes the setup procedure not only for the main unit but also for options. Please keep this guide. You will need it when you buy the options. For Windows 95/98 For Windows NT 4.0 For Windows 2000 Digital Copier

Setup Procedure ATTENTION C Use only the setup units/parts designated by Panasonic. If the copier should be damaged by using other setup units/parts, Panasonic will not bear any responsibility. C Drum unit already comes installed in copier. Copier Operating Instructions C For Copier (1 piece) C For Facsimile (1 piece) C CD-ROM (1 piece) C Setup Guide (1 piece) Toner Cartridge (1 piece) IIIII Unpack and install on a stable flat surface. Check that you have all the contents illustrated. Note: Do not plug the copier until directed to do so. IIIII Minimum Space Requirement Copier Sheet Bypass Exit Tray 300 mm 700 mm 100 mm Cable C Packed in the paper tray

damaged by using other setup units/parts, Panasonic will not bear any responsibility. C Unplug the power code when setting up the main unit. Setup Procedure 1 Set up the main unit Do not plug the main unit for these operations. Releasing the scanner Installing the toner cartridge Removing shipping materials Installing paper (See P.##) IIIII Following procedure needs to power on. 2 Printer # Install the printer driver software from the CD-ROM. (See P.##) $ Connect the printer to the PC with a bi-directional parallel interface cable (36 pins) 3 Fax # Connect the telephone line and the handset cable. (See P.##) $ Set up the dialing method (See P.##) 4 Extended Functions Install the extended function you need by following the instructions of the CD-ROM C Scanner C Device Setting C Phone Book C Status Monitor C Panasonic Document Management System ATTENTION

Setup Procedure ATTENTION IIIII Do not plug the copier until directed to do so. C Do not plug in copier until set-up is complete. 1 Remove the fixing screw for the optics unit. 2 Pull paper tray out of copier and secure the screw to the bottom of the paper tray. Note: When moving the copier reinstall the fixing screw. 3 # Completely remove the paper tray from the copier. $ Release the shipping tapes (2 pieces) from the bottom. % Push the bottom plate lock button. Bottom view 4 Remove the shipping tapes from the bottom plate. (2 pieces) 5 # Remove the shipping tape. $ Open the sheet bypass. % Push the button. & Open the right cover.

Setup Procedure ATTENTION C For optimum copy quality use the recommended Panasonic toner cartridge. Store toner cartridge in a cool dark place. Install toner cartridge immediately after unsealing. Remove the shipping material of fuser unit. #Remove the tapes. (2 pieces) $Pull out the shipping materials (white string with 2 blue stoppers) from the fuser unit. 6 7 Open the front panel. C Do not open the front panel first. It can not be opened unless you open the covers shown in procedure 5. 8 # Shake the toner cartridge several times. $ Take off the toner cartridge cover (white plastic) and discard. 9 Do not touch the magnetic roller! Do not stand the toner cartridge on end! Install the toner cartridge. 10 # Push the toner cartridge until it stops. $ Push the green handle until it locks. % Close the front panel. & Close the right cover. (See page 7) ( Close the sheet bypass. Handle

C If the paper tray is not closed completely, the Add Paper Indicator in the control panel will light up. In that case, please close the paper tray completely. C For changing paper size, see page 19. Lift slightly and pull paper tray out of copier until it stops. 1 2 Push the bottom plate down until it locks. 3 Install the paper guide into the holes that correspond to the paper size you plan to load. 4 Place paper. Up to 250 sheets. Do not fill above 5 # Slide the paper guide (front) to the paper edge. $ Push the paper tray back into copier. Overfill Indicator 1-sided copy Set-up is completed. Now ready to make a copy. IIIII Push the paper tray into copier. Plug in the unit and turn on the power. When the Add Paper Indicator (J J J J J) lights, install paper using the following procedure.

Setup Procedure IIIII Back & Left Side View LINE TEL HANDSET Ventilation Openings C Do not block the ventilation openings. Handset (Option) Parallel Interface Connector C Connect to PC Telephone Line Modular Jack (LINE) C Connect to a leased line from telephone company. TModular Jack for a Telephone Set independent from DP-150 series C To be connected with the non-DP-150 use telephone. Optional Modular Jack for an Optional Telephone Handset. Parallel Interface Cable C Obtain a cable conforming to a PC separately. (A cable does not come with the unit.) Use a cable of IEEE1284 specifications, with a maximum length of 6 ft.

Setup Procedure For Option ATTENTION IIIII Unplug the power code when installing the 2nd cassette module C Unplug the power code when installing each unit. 1 Remove the tapes. (3 pieces) 2 Remove the tape as the arrow shows. Make sure that the roller is on the right position as shown left. (The jagged side is up.) If the position is wrong, adjust the rollers the right position. 3 Press the button of the white rear cover then remove the cover. 4 Place the machine on the 2nd cassette module. Right Position Wrong Position

Setup Procedure For Option ATTENTION C Unplug the power code when installing each unit. Do not touch the gear area of the 2nd cassette module. Reinstall the rear cover and insert the hook then plug the power code. Fix the 2nd cassette module under the machine by turning the gears. (Total 4 points) If the 2nd cassette module is not fixed securely, it may fall and hurt you. 5 6 Remove the rear cover of the 2nd cassette module. # Pull out the hook. $ Open the cover slightly, and remove it. 7 Plug the harness of the 2nd cassette module into the machine connector. 8 # Reinstall the rear cover. $ Insert the hook untill it locks. 9 Slide out the paper cassette and remove the shipping materials. (See steps 3, 4 on page 9)

ATTENTION C Unplug the power code when installing the handset unit. Take the handset unit out of the carton. Connect the handset code to the handset cradle. 1 2 Hook the projections into square holes on the machine without putting on the receiver. 3 Connect the cable into the handset jack on the machine. 4 Connect the handset code into the receiver. Put the receiver on the cradle. IIIII Unplug the power code when installing the handset-unit.

Setup Procedure For Option 1 2 4 3 UE-410045 (1 MB) UE-410046 (2 MB) UE-410047 (4 MB) # Turn the Power Switch OFF. $ Install the memory card into the card slot. C Printed face side to forward. CAUTION C Do not install or remove the memory card white the power switch ON. # Install the memory card cover. $ Turn the Power Switch ON. Card Slot (Copier left rear side) Memory Card Cover

Windows 95/98 Next Next 1 Open Printer dialog box. Click Start key. Place cursor on Settings and click Printers. 2 Double-click Add Printer icon. 3 Click key. 4 Select Local printer and click key. • Network printer is specified when a printer on the network is installed. Refer to Windows 95/98 users' manual for details.

13 Next Next OK Have Disk... 5 Insert CD-ROM containing printer driver. Click key. 6 Specify drive name and type D:\Driver\Win9x. (When drive D is CD-ROM drive.) Click key. 7 Select device (Panasonic DP-130, 135 or Panasonic DP-150). Click key. 8 Select LPT1. Click key. Windows 95/98

14 9 In response to Do you want your Windows- based programs to use this printer as the default printer?, select Yes or No. Click key. 10 Required files are copied. Icons are displayed in Printer window and become available. • Be sure to delete drivers of earlier version before updating drivers. • Restart Windows after updating drivers. NOTE Finish Windows 95/98

Windows NT 4.0 Next Log in using an account with the authority to change system settings (e.g. Administrator). 1 Open Printer dialog box. Click Start key. Place cursor on Settings and click Printers. 2 Double-click Add Printer icon. 3 Select My Computer and then click key. Network printer server is specified when a printer on the network server is installed. Refer to Windows NT 4.0 users' manual for details.

16 Next Have Disk... OK Next 5 Insert CD-ROM containing printer driver. Click key. 6 Specify drive name and type D:\Driver\WinNT4. (When drive D is CD-ROM drive.) Click key. 7 Select device (Panasonic DP-130, 135 or Panasonic DP-150). Click key. 4 Select printer port and click key. Windows NT 4.0

17 Next Next Finish Finish 9 Select Not Shared and click key. Select Shared only when installing on network server. See Windows NT 4.0 users' manual for details. 10 Select Yes [recommended] and click key. Test printing starts. Default (initial setting) for paper size is A4 . Select No when skipping test printing, and click key. 8 In response to Do you want your Windows- based programs to use this printer as the default printer?, select Yes or No. Click key. Windows NT 4.0

18 Notes: NOTE 11 Required files are copied. Icons are displayed in Printer window and become available. Be sure to delete drivers of earlier version before updating drivers. Restart Windows after updating drivers. Windows NT 4.0 DP-150

Windows 2000 Next Log in using an account with the authority to change system settings (e.g. Administrator). About Windows 2000 Panasonic has performed operation tests on Document Scanner, Status Monitor and Printing System using Office 2000. However, the company does not necessarily guarantee normal operation of all applications on Windows 2000. Panasonic has not registered Windows 2000 logo. Ignore a warning message about logo upon installation. Windows 2000 is capable of disallowing installation of drivers without logo registration. If the function has been activated, cancel the function for installation. Operation manuals of this software package do not cover operation of Windows 2000. See descriptions about Windows NT4.0. 1 Open Printer dialog box. Click Start key. Place cursor on Settings and click Printers. 2 Double-click Add Printer icon. 3 Click key.

20 Next Next Next Have Disk... 5 Click key. 6 Select Printer Port and click . 7 Insert a CD-ROM containing printer driver. Click key. 4 Select Local Printer and click key. Specify Network Printer for installing a printer on server upon network. Refer to manual about Windows 2000. Windows 2000

21 OK Next Next 9 Select your device (Panasonic DP-130, 135 or Panasonic DP-150). Click key. 10 Click key. 8 Specify drive name and type D:\ Driver \ Win NT4. (When drive D is CD-ROM drive.) Click key. Next 11 Select Do not share this Printer and click key. Select Share as only when installing onto network server. Refer to manual of Windows 2000 for details. Windows 2000 Panasonic DP-150

22 Finish Yes Next 12 Select No and click key. 13 Click key. 14 Click key. Windows 2000 150 150

23 15 Required files are copied. Icons are displayed in Printer window and become available. Windows 2000

Next Next 1 Insert provided CD-ROM. 2 Click key. 3 Click Panasonic-DMS. 4 Verify installation destination and click key. 5 Click Standard.

25 Next Finish 6 Enter program folder name and click key. 7 Required files are copied. 8 Click key. Panasonic Document Management System folder is added to Start menu, and installation is completed.

26 NOTE When installing on Windows NT4.0, log in using an account with the authority to change system settings (e.g. Administrator). Standard installation method installs all of the following drivers and applications. Selecting custom installation allows selected installation of scanner and MFP utility individually. - Scanner Document Scanner (TWAIN scanner driver) - Manager Document Manager (Image management application) Document Viewer (Image editing application) - MFP utility Status monitor (Device status monitor) Configuration Editor Phone Book Editor By installing this software, the system selects LPT1 as a parallel port to be connected to a device. For connecting a device to a port other than LPT1, change connection ports by selecting [Panasonic], [Panasonic Document Management System], and [Port Selection Utility] from Start menu. Before updating software, be sure to delete old version software. Take the following steps to install software on Windows 2000: 1. For installation, log in using an account with the authority to change system settings (e.g. Administrator). 2. Restart Windows after completion of installation. 3. After restart, log in again using an account with the authority to change system settings (e.g. Administrator). 4. After completion of installation, normal operation is enabled by logging in with ordinary user account.

Windows 95/98 Add New Hardware Next The installation is required for transmitting/receiving FAX with a PC via digital image integrator, using general-purpose PC fax function software (recommended: WinFax). Class 2 Fax Modem 1 Select Settings from the Start menu and open the control panel. Double-click . 2 Click .

28 Next Next Next 3 Click . 4 Select No, the device isn't in the list. Click . Select No, I want to select the hardware from a list. Click . (Windows 98 only) (Windows 98 only)

29 Have Disk... Next OK Next Next Finish Yes 5 Select Ports (COM&LPT). Click . 6 Select Communications Port. Click . 7 Enter D:\Setup. D: means CD-ROM drive on PC. Drive name depends on the PC. Click . 8 Click . 9 Click . 10 Click . 11 Click and restart PC.

30 Next Next Next 14 Select Modem. Click . 12 Select No, the device isn't in the list. Click . Select No, I want to select the hardware from a list. Click . 13 Repeat steps from "1" to "3."

31 Next OK Select Don't detect my modem; I will select it from a list. Click . 15 16 Next Select Panasonic DP-130 or DP-150 Class 2 Fax Modem. Click . 17 Next 18 Select Panasonic MFP Redirected Com Port (COM4*). * COM number depends on the PC. Click . Enter D:\Setup. D: means CD-ROM drive on PC. Drive name depends on the PC. Click .

32 Finish 19 Click . Installation of modem is completed.

33 Windows NT 4.0 Next 1 Select Settings from the Start menu and open the control panel. 2 Double-click Modems. 4 Click . 3 Select Don't detect my modem; I will select it from a list. Click . Install Panasonic Class 2 Fax Modem. The installation is required for transmitting/receiving FAX with a PC via digital image integrator, using general-purpose PC fax function software (recommended: WinFax). Class 2 Fax Modem Have Disk...

34 OK Next Next Finish 5 6 Select Panasonic DP-130 or DP-150 Class 2 Fax Modem. Click . 7 Select a COM port shown at the bottom of the COM ports list. Click . 8 Click . Installation of modem is completed. Enter D:\Setup. D: means CD-ROM drive on PC. Drive name depends on the PC. Click .

36 Windows 2000 Next Next 1 Select Settings from the Start menu and open the control panel. 2 Double-Click Add/Remove Hardware. Click . 4 Select Add/Troubleshoot a device. Click . 3 Install Panasonic Class 2 Fax Modem. The installation is required for transmitting/receiving FAX with a PC via digital image integrator, using general-purpose PC fax function software (recommended: WinFax). Class 2 Fax Modem

37 Next Next Next 5 6 Select No, I want to select the hardware from a list. Click . 7 Select Modems. Click . Select Add a new device. Click .

38 OK Have Disk... Next 9 Click . 10 Enter D:\Setup. D: means CD-ROM drive on PC. Drive name depends on the PC. Click . 8 Select Don't detect my modem; I will select it from a list. Click .

39 Next Next 12 Select COM2. Click . 11 Select Panasonic DP-130 or DP-150 Class 2 Fax Modem. Click .

40 Yes Finish 13 If warning message for logo certification appears, click and continue installation. Click . Installation of modem is completed.

REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS PANASONIC COPIER, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PANASONIC DOCUMENT IMAGING COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF PROFITS SUSTAINED BY THE CUSTOMER IN CONNECTION WITH THE USE OR APPLICATION OF THIS PANASONIC COPIER. SEE YOUR DEALER FOR DETAILS OF DEALER’S WARRANTY.” U.S.A. only For Service Call: Panasonic Document Imaging Company A Division of Matsushita Electric Corporation of America Two Panasonic Way Secaucus, New Jersey 07094 FFPTD1041 S0800-0 August 2000 Printed in Japan Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3