RadiSys PROCELERANT SB5520DT1-SATA Product Manual

...

RadiSys and Procelerant are registered trademarks of RadiSys Corporation. Intel is a registered trademark of Intel Corporation. Microsoft, Windows, and Windows XP are registered trademarks of Microsoft Corporation. Red Hat and Red Hat Linux are registered trademarks of Red Hat, Inc. Linux is a registered trademark of Linus Torvalds. All other t ...

Preface ................................................................................................................................................................ 7 About this manual....................................................................................................................................................................... 7 Safety notices.................................................................... ...

Chapter 2: Hardware Reference.................................................................................................................... 19 Control panel connectors/IO ports ........................................................................................................................................19 Back panel connectors/IO ports........................................................................................ ...

Chapter 3: BIOS Configuration......................................................................................................................37 Starting the BIOS setup utility.................................................................................................................................................37 About the setup utility ....................................................................................... ...

This manual describes the RadiSys Procelerant® SB5520DT1 motherboard. This manual is intended for professional technicians, system integrators, and knowledgeable personal computer users. The manual is organized as follows:  Chapter 1, Introduction, on page 9 describes the features, specifications, and performance of the motherboard and provides detailed information about the chipset.  Chapter 2, Hardware Reference, on pag ...

WARNING!  When replacing the battery on the motherboard, use only lithium cell battery type CR2032. Using any other battery may damage the board.  Do not use a conductive instrument to remove the battery.  Dispose of the spent battery promptly. Do not recharge, disassemble, or incinerate the battery.  Keep the battery away from children. Where to get more product information For additional product information, vis ...

the first dual-processor platform with Intel QuickPath Interconnect (QPI) Technology. With dual Intel 5520 IOH chips built in, the SB5520DT1 motherboard offers enhanced system performance with increased bandwidth, as well as unprecedented scalability optimized for high- performance computing- and graphics-intensive applications. Major features of the SB ...

Notes:  Jumpers not indicated are for test purposes only.  The location of pin 1 is indicated by a red square:  When DP1 is on, the onboard power connection is on. Make sure to unplug the power cables before removing or installing components. JBT1 CPU2 CPU1 Jl2C1 JPL1 JPS1 JPB1 FAN3 JFI FAN2 FAN1 JD1 FAN6 JSMB1 JL1 FAN4 USB7 USB6 FAN5 KB MOUSE JPW2 JPW1 JPW3 JPI2C FAN7 I-SATA3 I-S ...

that contains a 24-pin and two 8-pin power connectors. Be sure to connect these connectors to the 24-pin (JPW1) and the two 8-pin (JPW2 and JPW3) power connectors on the motherboard. Failure to do so will void the manufacturer’s warranty on your power supply and motherboard. To avoid system overheating, be sure to provide adequate air flow to the system. T ...

LED Description DP1 Onboard standby power LED indicator (power LED) DP5 BMC activity LED indicator LEDS2 (SB5520DT1-SAS only) SAS heartbeat LED indicator: green LEDS2 (SB5520DT1-SAS only) SAS error LED indicator: red Table 5. SB5520DT1 specifications Item Description CPU Two Intel 5500/5600 series (LGA 1366) processors. Each processor supports: Two full-width Intel QuickPath Interconnect (QPI) @6.4 G ...

Main switch override mechanism ACPI Power Management Onboard I/O Intel ICH10R supports six SATA2 ports (with RAID0, RAID1, RAID10, RAID5 sup- ported in the Windows OS Environment and RAID0, RAID1, RAID10 supported in the Linux OS) Intel 82576 Gigabit Ethernet controller supports dual Giga-bit LAN ports One VGA Port supported by the Nuvoton WPCM450 controller  ...

Chipset overview Built on the Intel 5500/5600 series processor and the 5520 chipset, the SB5520DT1 motherboard provides the performance and feature set required for dual-processor-based high- end systems that are optimized for high-performance computing (HPC) and clustering servers. The SB5520DT1 chipset consists of dual 5520 IO hubs and an ICH10R (South Bridge). With the Intel QuickPath Intercon ...

transactions. The ICH10R provides up six SATA ports and 10 USB connections. In addition, the SB5520DT1 chipset also offers a wide range of RAS (Reliability, Availability and Serviceability) features. These features include memory interface ECC, x4/x8 Single Device Data Correction (SDDC), Cyclic Redundancy Check (CRC), parity protection, out-of-band r ...

The thermal control sensor monitors the CPU temperature in real time and turns on the thermal control fan whenever the CPU temperature exceeds a user-defined threshold. The overheat circuitry runs independently from the CPU. Once the sensor detects that the CPU temperature is too high, it automatically turns on the thermal fan control to prevent any overheat damage to the CPU. The onboard chassis thermal ...

operation. It is even more important for processors that have high CPU clock rates. The SB5520DT1 can accommodate 24-pin ATX power supplies. Although many power supplies generally meet the specifications required by the CPU, some are inadequate. In addition, the two 12V 8-pin power connections are also required to ensure adequate power s ...

location of each component on the motherboard, refer to Board layout on page 10. Control panel connectors/IO ports The I/O ports are color coded in conformance with the PC 99 specification. See the picture below for the colors and locations of the various I/O ports. Back panel connectors/IO ports Figure 4. Back panel I/O port locations ATX PS/2 keyb ...

the backplane IO panel to provide serial connection support for the motherboard. Video connector A video (VGA) connector is located next to COM1 on the IO backplane. This connector is used to provide video display. Universal serial bus (USB) Six Universal Serial Bus ports (USB0/1, 2/3, and 4/5) are located on the I/O back panel. Additio ...