KitchenAid MT4110RP Installation Instructions
Text of KitchenAid MT4110RP Installation Instructions
MICROWAVE OVEN BUILT-IN TRIM KIT
INSTALLATION INSTRUCTIONS
For countertop microwave oven model MT4110RP
MICROWAVE OVEN SAFETY
®
IMPORTANT: Save Installation Instructions for local electrical inspector’s use.
8205187/3828W5U0370
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell yo
Assemble the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied
Location Requirements
Check the location where the microwave oven will be installed.
The location must provide the following:
■
Wood cabinet with opening as shown
■
Support for weight of 100 lbs (45.4 kg)
■
Grounded electrical outlet (see “Electrical Re
KitchenAid MT4110RP Microwave Oven Preparation
1.
Unplug microwave oven before proceeding with installation.
2.
Remove any loose items inside microwave oven.
Trim Kit Installation
1.
Install upper trim piece using three 4 mm x 8 mm tapping
screws.
2.
Position duct with open end toward front of microwave oven,
and attach with two 4 mm x 8 mm tapping screws.
3.
Remove 2 existing screws from front of base plate and set
aside. Mount lower trim on base plate using two 4 mm x
8 m
© 2004 Whirlpool Corporation.
All rights reserved.
® Registered Trademark/TM Trademark of Whirlpool, U.S.A.
5/04
Printed in Korea