ergoline ergoselect 50 Operator's Manual

...

please let us know and we will correct the issue as soon as possible. We reserve the right to modify the design and technical features of the device and are not bound by the information and illustrations provided in this manual. All trademarks ...

Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Safety Information. . . . . . . . . . . . ...

General Information • The product ergoselect bears the CE marking CE‑0123 (Notified Body: TÜV), indicating its compliance with the provisions of the Council Directive 93/42/EEC about medical devices and fulfills the essential ­requirements of Annex I of this directive. The CE marking covers only the accessories listed in the Order Information cha ...

Danger • Explosion Hazard • The device is not designed for use in areas where an explosion hazard may occur. Explosion hazards may result from the use of flammable anes- thetics, skin cleansing agents or disinfectants. Warning • Patient Hazard, Equipment Damage • Do not expose the ergoselect to direct sunlight to prevent sys- tem components ...

Intended Use The optibike is a computer-controlled medical ­ergometer. At pedal speeds between 30 and 130 RPM and loads between 6 and 400 watt, the ergometer operates independent of the pedal speed. The speed-independent range is shown in the Appendix (Technical Specifications). The optibike ergometer may only be used in exercise test‑ ing as well a ...

Additional equipment connected to medical electrical equipment must comply with the respective IEC or ISO standards (e.g. IEC 60950 for data processing equipment). Furthermore all configurations shall comply with the re‑ quirements for medical electrical systems (see IEC 60601- 1-1 or clause 16 of the 3Ed. of IEC 60601-1, respectively). Anybody conn ...