Dirt Devil FD50100 Manual
Text of Dirt Devil FD50100 Manual
Model #’s FD50100
FD50105
FD50110
CARPET
WASHER
MANUAL
#961151127 / ID109742 / R0
©2014 All rights reserved
For quick reference, please record your product information below.
Model #:
Mfg. Code:
(Mfg. code located on the back or bottom of product)
Warranty Registration
Be sure to register your product online at www.DirtDevil.com or
call 1-800-321-1134 to register by phone.
Hint: Attach your sales receipt to this Owner’s manual. Verification of date of purchase may
be required for warranty service of your Dirt Devil® product.
Quick Start Assembly
6
Preparing the Carpet
10
How to
Remove and Replace Clean
Water Solution Tank
12
Empty the Dirty Water Tank
14
Place Dirty Water
Tank in Base of Cleaner
15
Remove the Brushroll
16
Replace the Belt
17
Trouble Shooting
18
Limited Warranty
19
Dirt Devil FD50100 IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF
USED COMMERCIALLY WARRANTY IS VOID.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
• Fully assemble before operating.
• Operate cleaner only at volt
CAUTION: TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store in a dry place. Do not expose machine to freezing temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
• To assist in reducing drying time, be certain the area is well ventilated when using
detergents and other cleaners with this machine.
• To help prevent matting and resoiling, av
POP THE BACK PANEL
INTO THE BASE.
SCREW IT
TOGETHER.
NEED HELP?
Go to dirtdevil.com/support or contact our Customer Service
Department at (800) 321-1134 8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
CHECK FOR COLOR FASTNESS
Before cleaning carpet/upholstery, test for color fastness. Dampen a
white cloth with solution. Test a small area in a closet or under a cushion.
Gently rub the cloth over the area. Check each color for color
THEN INSERT THE
HANDLE INTO THE
BODY. INSERT
THE SCREW AND
TIGHTEN.
WARNING
CAUTION
To reduce the risk of fire, electric shock, or
injury: ensure the power cord is out of the
way before attaching the upper handle.
To reduce the risk of damage: Do not use this
extractor on hard floors. Using this machine on
hard floors may scratch or damage your floors.
FILL WATER
SOLUTION TANK.
(SEE PAGE 12)
TIP THE CLEAN
WATER SOLUTION
TANK IN LIKE THIS.
IT WILL CLICK.
PLUG UNIT IN. STEP
ON THE HANDLE
RELEASE PEDAL AND
PULL BACK ON THE
UPPER HANDLE. THEN
STEP ON THE POWER
BUTTON TO TURN ON.
PULL TRIGGER TO
SPRAY SOLUTION WHILE
MOVING FORWARD.
THEN SLOWLY RELEASE
THE TRIGGER AND PULL
YOUR CARPET WASHER
BACK TO REMOVE DIRTY
WATER AND SOLUTION.
HANDLE
RELEASE
PEDAL
POWER
8
EMPTY CLEAN WATER
SOLUTION TANK AND
REFILL WITH CLEAN
WATER. REPEAT STEP
6 WITH JUST CLEAN
WATER FOR RINSING.
EMPTY DIRTY WATER
TANK WHEN FULL.
YOUR
CARPET
IS FRESH
AND CLEAN!
NEED HELP?
Go to dirtdevil.com/support or
contact our Customer Service
Department at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
Pick up the conversation on...
Twitter@DirtDevil
Facebook.com/DirtDevil
CAUTION
Never leave unit unattended w
Dirt Devil FD50100 HELPFUL HINTS FOR CLEANING CARPET
1. Vacuum carpet thoroughly
with a Dirt Devil
® cleaner.
• Do not oversaturate your
carpet with cleaning
solution.
• Stay off of the carpet
until it is dry.
2. Place plastic or foil under
and around the legs of
furniture until the carpet
has completely dried.
• Additional applications
may be needed for
heavily soiled areas.
• Be sure to rinse carpet
thoroughly with water.
• Wipe cleaning solution
from wo
Dirt Devil FD50100 • Allow carpet to dry completely. Try not to walk on the
carpet until it is dry.
• If you need to walk on the carpet, place white towels
on the areas you want to walk.
• If the carpet is not dry and the furniture must be placed
back in the room, use plastic or foil under the furniture
to prevent staining the carpet.
• Thoroughly clean the dirty water tank with hot tap water.
See page 14.
CAUTION
WARNING
Do not use the carpet cl
1. Press the Clean Water
Tank latch.
2. Tip it out like this.
REMOVE AND REPLACE CLEAN WATER
SOLUTION TANK
12
3. Unscrew measuring
cap from the back.
4. For a full size room,
place 5 capfuls of Dirt
Devil® solution into Clean
Water Solution Tank .
5. Fill remaining Clean
Water Solution Tank
with hot tap water.
Tightly screw cap
back on.
6. Place the Clean Water
Solution Tank back in
bottom first. It will click.
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only Dirt
Devil brand cleaning fluid intend
EMPTY THE DIRTY WATER TANK
1. Pull the latch to release.
2. Hold the handle and pull
tank up and out.
3. Pull lid out and
empty like this.
4. Rinse the tank and
filter with hot tap water.
Wipe and let dry before
storing to prevent
mildew. Replace the
dirty water tank lid.
14
PLACE DIRTY WATER TANK IN
BASE OF CLEANER
1. Place carpet cleaner
on a flat surface.
2. Hook the front of the
tank into the base.
Make sure the tabs on
the bottom of the tank
are latched.
3. The nozzle should be
flush with the base. If
it’s not, this will result
in poor water pickup.
4. Now place the rear
of the tank into the
base of the cleaner.
Push handle down
until it clicks.
IMPORTANT
You will hear a noticeable change in the pitch of
the
REMOVE THE BRUSHROLL
Note: Be sure to switch off the unit, unplug & remove the
clean & dirty water tanks before servicing.
1. Flip your carpet washer
on its side like this.
2. Use a Phillips screwdriver
to remove the 3 screws
here. Now pull cover off.
4. Keeping tension on
the belt, use two hands
to lift the brushroll up
and out.
4. Replace belt cover and
secure with the three
screws.
CAUTION
To reduce the risk of injury from moving
parts, unplug
REPLACE THE BELT
1. Take off cover (Refer to
page 16). Remove and
toss the old belt out.
2. Place the new belt on
the motorshaft, then slip
it in the area without
brushroll bristles.
4. Replace belt cover and
secure with the three
screws.
A
Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water,
take it to a service ce
TO REDUCE THE RISK OF PERSONAL
INJURY - UNPLUG BEFORE CLEANING OR SERVICING.
If a minor problem occurs, it usually can be solved quite easily when the cause is found
by using the checklist below. Any other servicing should be done by an authorized service
representative. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a service center prior to continuing use.
PROBLEM
POSSIBLE C
WHAT THIS WARRANTY COVERS
When used and maintained in normal household use and in accordance with the Owner’s Manual, your
Dirt Devil® product is warranted against original defects in material and workmanship. During the
Warranty Period, We will provide labor and parts, at no cost to you, to correct any such defect in
products purchased in the United States, U.S. Military Exchanges and Canada.
HOW TO MAKE A WARRANTY CLAIM
If this produc
Call our Customer Service
Department
at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
www.dirtdevil.com
Find GENUINE
Replacement Parts at
www.dirtdevil.com
This product uses the following parts:
BELT STYLE
30
PRE-MOTOR FILTER
F92
OUR VACS SPEAK
VOLUMES
Pick Up the Conversation On…
Twitter@DirtDevil
Facebookcom/DirtDevil