GE RHM 30 Specifications

• Batching • Injections • Filling Features • Suitable for pressure up to 490 bar • Flow uncertainty down to 0.15% • Density uncertainty down to 0.5% • Repeatability better than 0.05% • Unique torsion oscillator • Typical measuring ranges from 7.5 to 750 kg/min • Minimal flo ...

PM0 (parallel manifold construction) Process Connection Face to face length (L) Order Code mm in Standard Flange DIN DN50/PN40 725 28.54 D1 Flange DIN DN50/PN100 725 28.54 D2 Flange ANSI 2" 150# RF/SF 725 28.54 A1 Flange ANSI 2" 300# RF/SF 725 28.54 A2 Flange ANSI 2" 600# RF/SF 725 28.54 A3 Optional Flange ANSI 2" 600# RTJ 725 28.54 ...

PF0 (parallel, sealless construction with flange connection) Process Connection Face to face length (L) Order Code mm in Standard Flange DIN DN80/PN40 725 28.54 C1 Flange DIN DN80/PN100 725 28.54 C2 Flange DIN DN80/PN320 725 28.54 C4 Flange ANSI 3" 150# RF/SF 725 28.54 F1 Flange ANSI 3" 300# RF/SF 725 28.54 F2 Flange ANSI 3" 600# ...

SF0 (serial, sealless construction without dead spaces) Process Connection Face to face length (L) Order Code mm in Standard Sanitary 1 1/2 " Triclamp, DIN 32676 300 11.81 S1 Sanitary NW32, DIN 11851 300 11.81 S2 Type single path, welded measuring loops without seals and sanitary connection Type single path, welded measuring loops ...

The maximum pressure (pmax) of a sensor is determined by its weakest part. The weakest part can be the measuring loops (pmax indicated below) or the construction type (pmax indicated in the Basic Order Code section, last page) or the selected flanges / fittings (for pmax please see respective standard). pmax of P1 measuring loops M3 ...

Max Flow Rate Qmax = 750 kg/min (1653 lb/min) and Qnom (*) = 600 kg/min (1323 lb/min) Standard Models Flow Rate Uncertainty kg/min lb/min in % of reading 750 1653 0.20 500 1102 0.20 100 220 0.20 35 77.2 0.20 15 33.1 0.50 Uncertainty % DP (bar) Flow Rate kg/min Go ...

Temperature Range • NT Models from -20 to +120°C (-4 to +248°F) • ET Models from -45 to +120°C (-49 to +248°F) • ET2 Models from -45 to +210°C (-49 to +410°F) • ET1 Models from -196 to +50°C (-320 to +122°F) • HT Models from 0 to 350°C (+32 to +662°F) (Heating for housing optional, please consult your local ...

TA ET from -45°C to +120°C T2 ET2 Extended Temperature Range from -45°C to +210°C T3 ET1 Extended Temperature Range from -196°C to +50°C T4 HT High Temperature Range from 0°C to +350°C Pressure Range of Measuring Loops @ 120°C and M1 material P1 pmax = 123 bar (standard) P2 pmax ...