CyberData VoIP V3 Quick Start Manual

930521A 1.0 Out-of-Box and Prior to Final Installation 1.1. Verify that you have received all of the parts listed on the Installation Quick Reference placemat. 1.2. Download the current manual, otherwise known as an Operation Guide, which is available on the Documentation page at the following website address: http://www.cyberdata.net/p ...

930521A 3.0 Power Test 3.1. Plug in the CyberData device and monitor the LED activity above the ethernet port on the back of the Intercom. See the following figure: 3.2. The green Link LED blinks off once during the boot up process and then comes on again and remains constant (solid green). The yellow Activity LED may be blinking dependi ...

930521A 4.0 Connecting to a Network in a Test Environment Note The following connections are usually needed for this procedure: • PC • PoE switch or injector • CyberData device 4.1. In a test environment, use a PC that is connected to the same switch as a single CyberData device. Note the subnet of the test PC. 4.2. Use the CyberD ...

930521A 4.7. After the Discovery Utility program has located the device on the network, click Launch Browser . When the IP address matches the subnet of the PC that you are using to access the device, the Discovery Utility program will be able to launch the browser window which is configured to the device’s IP address. 4.8. Log on to ...