CYP CPRO-11SE8 Operation Manual

is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document ...

operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. � ...

4. System Requirements��� ...

from your HDMI source. When connecting to a TV or display you don’t always get the best audio, or in the case of a PC monitor, no audio at all. With this Audio Extractor you can take your original HDMI audio signal and convert it to digital optical or analog multi-channel audio. This means that you can output your audio signal to external speakers or extend your ...

•  Supports HDMI audio sampling rate up to 192 kHz •  Supports Optical S/PDIF audio sampling rate up to 192 kHz •  HDMI supports high-bit-rate (HBR) audio •  No HDMI output connection is required to receive audio at the analog and optical outputs •  Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs •  Maximum input and output HDMI cable le ...

6.1 Top Panel Link LPCM Power HDMI 4Kx2K LPCM 7.1 Extractor 3 1 2 1 LPCM: This LED will illuminate when the output audio EDID is switch to LPCM 7.1CH. 2 Link: This LED will illuminate when input source is connected with HDMI signal. 3 Power: This LED will illuminate when the unit is connected with power supply. 6.2 Right Panel HDMI In Service 1 2 1 Service: This port is reserved for firmware update only. 2 H ...

Out Optical HDMI FL/FR LFE/FC 1 2 3 4 1 HDMI OUT: Connect to the display (TV/monitor) with an HDMI cable for video and audio signal output. For 4Kx2K or 3D image display, an equivalent standard display is required. No HDMI output connection is required to send audio through the analog and optical outputs. 2 Optical OUT: Connect to audio equipment such as an amplifier or Hi-Fi system with an optical cable for digital audio output. S ...

output audio through all output port. For Example, the optical output port will have no audio when the input audio format is more than LPCM 7.1CH. 2 Power: Press this button to switch on the device or to set it into standby mode. 3 DC 5V: Plug with 5V DC power adaptor from the AC wall outlet for power supply. 6.5 Rear Panel Out RL/RR RLC/RRC 1 2 1 RL/RR: Connect to audio equipment such a ...

HDMI In Service Link LPCM Power HDMI 4Kx2K LPCM 7.1 Extractor Out RL/RR RLC/RRC Out Optical HDMI FL/FR LFE/FC DVD or Blu-ray Player Amplifier HDMI Output HDMI Audio Extractor 7.1 Speakers Digital Audio Output (Optical) Display HDMI Input ...

Input Ports 1 x HDMI, 1 x Mini-USB (service only) Output Ports 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack HDMI Audio Sampling Rate Up to 192 kHz Optical S/PDIF Audio Sampling Rate Up to 192 kHz HDMI Audio Format LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio Optical Audio Format LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH L/R ...

Output Audio Mode HDMI Optical L/R 2CH V V V LPCM 5.1 V V V LPCM 7.1 V V Bitstream 5.1 V V Bitstream 7.1 V 9. ACRONYMS ACRONYM COMPLETE TERM DTS Digital Theater System ...