SummerAire SMO112 Operating Instructions

NOTICE TO HOMEOWNER THIS FURNACE SHALL BE INSTALLED BY A CERTIFIED INSTALLER AND WHERE REQUIRED BY LAW, A LICENSED TECHNICIAN Save These Instructions For Reference Summeraire Mfg. Peterborough, Ontario K9J 7B1 FOR SERVICE CALL: INSTALLATION INFORMATION _ ______________________________ _________________ ...

NEVER LEAVE COMBUSTIBLE OR OTHER MATERIALS AROUND OR NEAR THE FURNACE. NOTE: AN OPTIONAL VESTIBULE IS AVAILABLE FOR THE SMO112 FURNACE THE VESTIBULE COMPLETELY ENCLOSES THE OIL BURNER IDENTIFY THE LOCATION OF YOUR BURNER / FURNACE POWER SWITCH OIL BURNER O ...

The complete oil burner should be checked and serviced by a qualified technician. • Check oil pump strainer • Replace oil filter cartridge • Check electrodes • Oil burner motor ( see lubrication section ) • Restart burner by following instructions in; “STARTING THE OIL BURNER” section. • If your f ...

CLEANING THE SMO112 Remove smoke pipe and cleanout plate on rear of furnace. Remove baffles ( 5 ) from secondary heat exchanger. Loosen soot from the secondary heat exchanger with a cleaning tool or stiff brush. Remove all loose soot with a vacuum cleaner suitable for this purpose. Inspect pa ...

installed in Canada, a replacement Heat Exchanger (Heat Element) free of charge F.O.B. Factory, Peterborough, Ontario, Canada. If the said Heat Exchanger wears out or fails under normal use and service due to a defect in materi ...