TSC TTP-245 Plus Service Manual

i 1. FUNDAMENTAL OF THE SYSTEM ........................................................................ 1 1.1. Overview .................................................................................................................. 1 1.1.1. Front View ....................................................................................... ...

ii 3.5. Replacing Platen Assembly ......................................................................................46 3.6. Replacing the Stepping Motor Bracket / Metal Assembly and Stepping Motor .........47 3.7. Replacing Label Guide & Gap Sensor Assembly ......................................................49 3.8. Replacing Black Ma ...

iii 9.6 Stepping Motor Assembly drawing ...........................................................................99 9.7 Option and accessories ............................................................................................ 100 9.7 Option and accessories drawing ................................................................. ...

1 1. FUNDAMENTAL OF THE SYSTEM 1.1. Overview 1.1.1. Front View Fig. 1.1.1 Front View Top Cover Open Lever Ribbon Access Window Feed Button LED Indicator Label Roll Capacity View Window ...

2 1.1.2. Rear View Fig. 1.1.2 Rear View 1.2. Specification 1.2.1. Printer Item TTP-245 TTP-343 Mechanism Resolution 203 dpi. 300 dpi Max. Print Width 108 mm. 104 mm Max. Print Length 1000 mm ( 39” ). 420 mm Ribbon Capacity 300 meter with 1” core. (Max. OD 67 mm) Printing Speed 2, 3, 4 and 5 ips selectable. peeler function 2, 3 ips sele ...

3 Enclosure Structure Dimension Operation Panel Double-walled plastic. Standard Model: 314mm(L) x 213mm(W) x 188mm(H) One push switch, and one indicator LED (Green, Orange, Red colors). Hardware Sensor Transmissive sensor (offset 6 mm from liner edge). Reflective sensor (position adjustable). Head open micro switch. Ribbon end sensor Memory ...

4 1.2.2. LED LED Color Description Green/ Solid This illuminates that the power is on and the device is ready to use. Green/ Flash This illuminates that the system is downloading data from PC to memory and the printer is paused. Amber This illuminates that the system is clearing data from printer. Red / Solid This illuminates printer head o ...

5 Gap/Black Mark Sensor Calibratio, Label Length Measurement, Self Test and enter Dump Mode 1.Turn off the power switch. 2. Hold on the button then turn on the power switch. 3. Release the button when LED becomes amber and blinking. (Any amber will do during the 5 blinks).  The LED color will be changed as following order. Amber  red ...

6 Force Gap Sensor Calibration 1. Turn off the power switch. 2. Hold on the button then turn on the power switch. 3. Release the button when LED turns red/amber after 5 green/amber blinks. (Any red/amber will do during the 5 blinks).  The LED color will be changed as following: Amber  red (5 blinks)  amber (5 blinks)  green (5 b ...