TSC TTP-245 Plus Operation & User’s Manual

COMPLIANCES................................................................................................1 1. Introduction.........................................................................................1 2. Getting Started....................... ...

...

commitment on the part of Taiwan Semiconductor Company. No part of this manual may be reproduced or transmitted in any form by any means, for any purpose other than the purchaser’s personal use, without the expressed written permission of Taiwan Semiconduc ...

Thermal Bar Code Printers. Although the printer takes only a small amount of space, it delivers reliable, superior performance. This printer provides both thermal transfer and direct thermal printing at user selectable speed of: 2.0, 3.0, 4.0 or 5.0 ips, for ...

Options „ External label roll mount „ Label spindle (3-inch diameter core) „ Programmable keyboard (KU-007 Plus) „ Stand-alone LCD keyboard (KP-200) „ Automatic cutter module „ Peel off module „ Internal Ethernet print server „ External 802.11b/g wireless print server ...

Fig. 1 Top front view Top Cover Open Lever LED Indicator Feed Button Printer Top Cover Ribbon Access Cover Clear Window 1 2 3 4 5 6 1. USB Interface 2. Centronics Interface 3. RS-232C DB-9 Interface 4. Power Jack 5. Power Switch 6. Rear Paper Guide Fig. 2 Rear view ...

1. Place the printer on a flat, secure surface. 2. Make sure the power switch is off. 3. Connect the printer to the computer with the Centronics or USB cable. 4. Plug the power cord into the power supply connector at the rear of the printer, and then plug the power cord into a properly grounded receptacle. Fig. 3 Attach ...

1. Push down on the ribbon access window to unlatch and open the cover. 2. Place a paper core onto the ribbon rewind spindle. 3. Mount the ribbon rewind paper core on the front hubs. 4. Install a ribbon on the ribbon supply spindle. 5. Mount the ribbon supply spindle on the rear hubs. 6. Thr ...