Solo 880-12 Instruction Manual

04/2012 880-12 / 880-14 // 881-12 / 881-14 Instruction Manual Translation of the original instructions Cut-off machine Attention! Before first commissioning, read these operating instructions thoroughly and observe the safety provisions under all circumstances! en ...

Translation of the original instructions Dear customer thank you for purchasing this quality product from our company. For many decades, we have been a producer of hand-held and back-carried gas powered motor devices. Each of our motor devices benefits from this experience in detail today as well. State-of-the-art production materials in connection with our know-how warrant a ...

Please keep the original packaging in order to protect the equipment against transport damage in case you ever need to ship or transport it If the packaging materials are no longer required they must be disposed of properly in accordance with applicable local regulations. Cardboard packaging materials are raw materials which can be recycled or reused. At the end of the equipment’s service life, please make sure that you ...

ENGLISH 3 1 Information about these operating instructions ............................................................................... 4 1.1 Notational conventions used in the operating instructions ............................................................ 4 2 Warning, instruction and notice icons ............................................................................................... 4 3 Safety provisions ................ ...

ENGLISH 4 These operating instructions are an integral part of the motor device. They contain important information and instructions for handling the motor device. Always follow any specified safety regulations and instructions, as they are a prerequisite for ensuring that you are working safely with the equipment. These operating instructions must be kept available at the place of use of the equipment at al ...

ways wear t ways wear s ear safety g efore starting witch off the moking is pr eep the pow tention: Dan tention: Kick otes in chap tention: Dan ear breathin o not use cir ever continu nly use cutti brator dial fo oise level LW ube® = Sma el tank.  tank (gre ...

(cold cutting), each with the cutting discs approved for this material and only for the working situation indicated in chap. 7 on page 25. For specifically trained users in rescue missions, other approved cutting discs are also offered that can be used to cut various composites. These special applications are only permitte ...

authority f with the re  When cut that the re bars must provisions  Never alte  Danger of prior to us  Only use approved cutting too  Reliable o only genu best quali from your the correc Please no  Always st engine. N Persons wh damage or c n order to p equipment. Cloth When canno close Check the in melting mat contaminate Never wear the environm Wear Use p Eye/f Wear Wear Use b ...

workplace or at the site of fuelling!  Always switch off the engine before fuelling.  Danger of fire! Never refuel with the engine still hot!  Always carefully open the tank cap so that any overpressure present can reduce slowly and no fuel will splash out.  Prevent skin and eye contact with mineral oil products. In ...

 Before as to "0" and Only the i  Wear prot  The powe own that a other wor  Danger of tight fit.  Only perfo  Danger of safety! Before any operating an  Stop dial  The thrott to operate locked).  The cuttin  Danger of result in s  In case of not be sta  Only use  Keep at le rooms.  Observe s power too Perfo  Check the 3.6 Durin 3.7 ...

he motor de nger of pois sible and od row situatio exchange a reased dang cure the wor olved and w eck the site Spark form explosive g No electrica Objects tha environmen Prepare the e work piece en working rk carefully, ...

ENGLISH 11 Model 880-12 881-12 880-14 881-14 Motor Single-cylinder two-stroke motor, four-channel flushing Engine capacity cm3 81 Bore Ø / stroke mm 52 / 38 Max. power at rpm kW / 1/min 4.0 / 9,300 Max. torque at rpm Nm / 1/min 4.8 / 7,000 Max. permissible speed 1/min 9,500 ±200 (no load with cutting disc) Idling speed 1/min 2,600 ±200 Clutch engagement speed 1/min 4,800 ±200 Fuel tank capacity l 0,9 Oil tank capacity l --- 0.3 ...

ENGLISH 12  Basic device  Cutting disc  Spindle adapter disc for cutting discs with 1" inner bore  Tool: Combination tool (spark plug spanner with screwdriver), blocking pin and additional small screwdriver  These operating instructions (incl. EC Declaration of conformity:  Chap. 11, page 39) 1. Cutting disc 16. Starter handle 2. Protective cowl 17. Stop dial / one-touch stop button 3. Gip for protective cowl ...

ENGLISH 13 View: Rear 9 19* 18 7 20 17 4 3 2 24 15 6 View: Front left 30 1 11 21 8 5 4 16 25 26 2 View: Profile left 19* 10 3 2 21 8 16 5 17 9 6 11 22 23 18 1 31 ...

ENGLISH 14 Release of the throttle control (10)  Grasp rear handle (6) with the right hand. The throttle control lock (9) is operated with the palm.  The throttle control (10) is released. Starter handle (16) and starter rope;  Chap. 6.3, page 24 Primer (20) In the delivery condition, after extended resting time and with the tank completely empty, there is no fuel yet in the carburettor after fuelling up. Starting process: ...

ENGLISH 15 The cutting discs used must correspond to the specifications from chap. 7.1 on page 25! The power tool spindle is designed for cutting discs with an inner bore of 20 mm. Cutting discs with 1" inner bores must only be installed together with the spindle adapter disc. Installation of cutting discs with 1" inner bore:  Chap. 5.2, page 16! When using cutting discs with an inner bore of 20 mm, no additional spindle adapter disc ...

ENGLISH 16  Push on disc (b) and turn in cutting disc attachment screw (11).  Insert blocking pin (a) entirely into the blocking opening (12) and firmly tighten (30 Nm) the cutting disc attachment screw (11). Securely hold the power tool at the top handle with one hand and push it firmly onto the ground.  Remove the blocking pin (a). The power tool's spindle is designed for cutting discs with an inner bore of 20 mm. For proper ...

ENGLISH 17 The protective cowl (2) can be swivelled forward and backward in a limited area. For adjustment of the protective cowl, the power tool must be put securely on the ground. Securely hold the power tool at the top handle (4) with the left hand and push it firmly onto the ground. With the right hand at the handle for protective cowl adjustment (3), swivel the protective cowl accordingly. To keep sparks and particles torn out in c ...

ENGLISH 18 Mix table for fuel mix: Branded 2-stroke engine oil in litres, 2 % (1:50) Petrol in litres 0.020 1 0.040 2 0.100 5 0.200 10 Instead of a self-produced fuel mix, you may also use a pre-mixed special fuel mix for two-stroke motors. We recommend the special fuel mix of the brand "Aspen 2-stroke". The special fuel manufacturer's information must be observed. Models 881-12 and 881-14 with iLube® Models 881-12 and 881-14 are equip ...