Boss audio multimedia player Operation & User’s Manual

PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . A BOSS AUDIO MULTIMEDIA ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction . The picture may b ...

THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT ...

Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc. Rough spots on ...

driving function of the driver. 2. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 3. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. 4. Consult with your nearest dealer ...

DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER TAPPING SCREW CONSOLE SLIDE BRACKET HOUSING HEX BOLT 3. Remove the PLASTIC COVER of the both sides away 4. Insert the two KEY PLAT into the grooves at both sides of the unit as shown in figure until they click . PLASTIC COVER KEY PLATE 5. Pulling the levers makes it possible to remove the unit from the dashboard . ...

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. 2). Pull-off the front panel and keep the front panel into the case . Detaching Control Panel Before detaching the control panel, be sure to turn off the power. 1). Press the “REL” release button and the left hand side of front panel will release. Attachi ...

pictures to be played back to the monitor. If the cable has not been correctly connected, appears on the monitor. warning message ISO CONNECTOR 1 BLACK.........................GROUND 5 YELLOW...............CONSTANT(+) 2 RED.........................IGNITION(+) 4 BLUE................AUTO ANTENNA 1 GREEN/BLACK... ...

19. ANG BUTTON 20. 10+ BUTTON 21. LANG/L/R/ST BUTTON 22. A-B/CLEAR BUTTON 23. >II BUTTON 24. >>I BUTTON 25. ZOOM BUTTON 26. EQ BUTTON 27. SUBT BUTTON 29. APS BUTTON 30. MENU BUTTON 31. SETUP BUTTON 32. / / / BUTTON 33. GOTO BUTTON 34. PBC/TITLE BUTTON 35. RDM BUTTON 36. AF BUTTON 37. TA BUTTON 28. POWER BUTTON 1. OSD BUTTON 2. PROG BUTTON 3. LOUD BUTTON 4. 9 5. LOCK BUTTON 6. ANGLE/MO/ST BUTTON 7. LOC/SLOW BUTTON ...

Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark. Preparing the Remote Control 1.First push to inside as the direction indicated by the arrow (See )And then Remove the battery holder as the direction indicated by the arrow (See ). 2.Replace the battery S ...

GENERAL WALLPAPER ... ABOUT ... ADJUSTABLE ITEMS: ANIMATION In RADIO mode, you can change the playing time of animation among of “OFF, 10S, 30S, 1M,90S, 2M, 3M and 4M ”. Note: Please set the playing time of the animation to “ 10S ” for the first, when you turn the unit on . KEY BEEP : ON or OFF. GENERAL ANI ...

aspect (4:3 or 16:9) according to the connected TV set. Normal/PS (For 4:3 TV) Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.) Normal/LB (For 4:3 TV) Played back in LETTER BOX style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.) Wide (For 16:9 TV) Select when a wide-screen TV set is connect ...

Adjust treble level . BASS: -7 to +7 Adjust bass level . SUBWOOFER: touch to adjust subwoofer volume and frequency. EQ: touch to select audio mode as follow: USER -> JAZZ -> CLASSIC -> POP -> ROCK LOUDNESS: touch to select loudness effect as :OFF -> LOW -> MID -> HIGH FADER/BALANCE: BALANCE: R 0-10 to L 0-10 Adjust sound balance between left and right speakers . FADE: F 0-10 to R 0-10 Adjust sound balance between front and ...

1. AUXILIARY INPUT JACK Insert an external device to this AUX jack in order to have audio output of the device through the unit. 3. VOL KNOB In normal mode, knob is used to increase or decrease the volume. 2. SEL BUTTON switch between BASS,TREBLE,BALANCE, FADE,COLOR, RIGHTNESS, CONTRAST, TINT, press and hol ...

In power off mode, press it to turn on the unit. In power on mode, short press it repeatedly to select one mode of the RADIO, DISC, USB, CARD, AUX and AV; long p to turn off the unit. ress it 5/6. >>| and |<< BUTTONS In radio mode, 7 (EJECT) BUTTON Insert the disc, label side facing up, until the mechanism senses its presence and draws the disc in. Press it to eject the disc ...

Briefly touch “ ” to decrease frequency by one step of channel spacing. Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically. To tune in strong-signal FM Station only (LO/DX function) Press button on the remote control to select mode of Local and Long-distance traffic news. Storing and Listening to a Memory Station Set ...

RADIO RDS PI MUTE RDS TA OFF RDS AF OFF Automatic Memory Storing & Program Scanning 3 RDS FUNCTION ADJUSTABLE ITEMS: Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio s ...

(Priority For Traffic Information) When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announce- ments from time to time, the TP display lights up. When the TA function is switched on , the FM traffic automatical ...

Media Operation In audio play mode, the message will display as below : (When Parking Brake is applied .) Mute function To select the Equalizer mode Fast forward Fast backward Intro Function To decrease the volume level To increase the volume level Loudness Function Subwoofer Function Turning pre-switching for traffic announcements on and off Switching on and off an Alternative frequency Play/Pause the playing To skip the next track ...

FOR Digital Video : Tap the icon or press the RPT button on the remote control to select REPEAT mode as follows : REPEAT ALL CHAPTER REPEAT ON TITLE REPEAT ON REPEAT OFF Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right ...

Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) 3). RDM(RANDOM) FUNCTION During DISC playback, touch screen of “ ” section ( press the RDM button on the remote control to play in random. Each play mode the order is different . (Depend on the disc used for VCD). Touch it again to cancel this function . FOR VC ...